Panasonic FP Series PLC Programming Manual - CTi Automation

1.1.3 FPΣ
12k type
Rel elay
Memmory
area (wo words)
External input relay
(see note 1)
FPG−C32T/C32TTM
External input relay
(see note 1)
FPG−C32T2/C32T2TM
FPG−C24R2/C24R2TM
FPG−C28P2
External output relay
(see note 1)
FPG−C32T/C32TTM
External output relay
(see note 1)
FPG−C32T2/C32T2TM
FPG−C24R2/C24R2TM
FPG−C28P2
Internal relay
(see note 2)
Link relay
(see note 2)
Timer
(see notes 2
and 3)
1.1 Table of Relays, Memory Areas and Constants
Item Number
of points
Memory area available for use Function
512 X0−X31F Turns on or off based on
external input.
Counter
(see notes 2
and 3)
1184 X0−X73F
512 Y0−Y31F Externally outputs on or off state.
1184 Y0−Y73F
1568 R0−R97F Turns on or off only within a
program.
1024 L0−L63F Shared relay used for PLC link.
1024 T0−T1007/C1008−C1023 Goes on when the timer reaches
the specified time.
Corresponds to the timer
number.
1024 C1008−C1023/T0−T1007 Goes on when the counter
increments.
Corresponds to the counter
number.
Special internal relay 176 R9000−R910F Turns on or off based on specific
conditions. Used as a flag.
External input relay 32 words WX0−WX31 Code for specifying 16 external
(see note 1)
input points as one word (16
FPG−C32T/C32TTM
bits) ) of data.
External input relay
(see note 1)
FPG−C32T2/C32T2TM
FPG−C24R2/C24R2TM
FPG−C28P2
74 words WX0−WX73
External output relay 32 words WY0−WY31 Code for specifying 16 external
(see note 1)
output points as one word (16
FPG−C32T/C32TTM
bits) ) of data.
External output relay
(see note 1)
FPG−C32T2/C32T2TM
FPG−C24R2/C24R2TM
FPG−C28P2
74 words WY0−WY73
Internal relay
(see note 2)
98 words WR0−WR97 Code for specifying 16 internal
relay points as one word (16
bits) of data.
Link relay 64 words WL0−WL63 Code for specifying 16 link relay
points as one word (16 bits) of
data.
CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
1-9