Attention! Your ePaper is waiting for publication!
By publishing your document, the content will be optimally indexed by Google via AI and sorted into the right category for over 500 million ePaper readers on YUMPU.
This will ensure high visibility and many readers!
Your ePaper is now published and live on YUMPU!
You can find your publication here:
Share your interactive ePaper on all platforms and on your website with our embed function
Panasonic FP Series PLC Programming Manual - CTi Automation
Panasonic FP Series PLC Programming Manual - CTi Automation
Panasonic FP Series PLC Programming Manual - CTi Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1<br />
Relays, Memory Areas and Constants<br />
<strong>CTi</strong> <strong>Automation</strong> - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
<strong>CTi</strong> <strong>Automation</strong> - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
Chapter 1 Relays, Memory Areas and Constants <strong>CTi</strong> <strong>Automation</strong> - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
- Page 1 and 2: CTi Automation - Phone: 800.894.041
- Page 3 and 4: Table of Contents Chapter 1 Relays,
- Page 5 and 6: Table of Contents 4.4.2 Operation M
- Page 7 and 8: Basic Instructions Sequence basic i
- Page 9 and 10: OR 16−bit data compare (OR) .....
- Page 11 and 12: Control instruction Table of Conten
- Page 13 and 14: Table of Contents F66 WOR 16-bit da
- Page 15: Table of Contents F113 WBSL Left sh
- Page 18 and 19: Table of Contents F175 SPSH Pulse o
- Page 20 and 21: Table of Contents F278 DSORT Sort d
- Page 22 and 23: Table of Contents F336 FABS Floatin
- Page 26 and 27: Relays, Memory Areas and Constants
- Page 28 and 29: Relays, Memory Areas and Constants
- Page 30 and 31: Relays, Memory Areas and Constants
- Page 32 and 33: Relays, Memory Areas and Constants
- Page 34 and 35: Relays, Memory Areas and Constants
- Page 36 and 37: Relays, Memory Areas and Constants
- Page 38 and 39: Relays, Memory Areas and Constants
- Page 40 and 41: Relays, Memory Areas and Constants
- Page 42 and 43: Relays, Memory Areas and Constants
- Page 44 and 45: Relays, Memory Areas and Constants
- Page 46 and 47: Relays, Memory Areas and Constants
- Page 48 and 49: Relays, Memory Areas and Constants
- Page 50 and 51: Relays, Memory Areas and Constants
- Page 52 and 53: Relays, Memory Areas and Constants
- Page 54 and 55: Relays, Memory Areas and Constants
- Page 56 and 57: Relays, Memory Areas and Constants
- Page 58 and 59: Relays, Memory Areas and Constants
- Page 60 and 61: Relays, Memory Areas and Constants
- Page 62 and 63: Relays, Memory Areas and Constants
- Page 64 and 65: Relays, Memory Areas and Constants
- Page 66 and 67: Relays, Memory Areas and Constants
- Page 68 and 69: Relays, Memory Areas and Constants
- Page 70 and 71: Relays, Memory Areas and Constants
- Page 72 and 73: Relays, Memory Areas and Constants
- Page 74 and 75:
Relays, Memory Areas and Constants
- Page 76 and 77:
Relays, Memory Areas and Constants
- Page 78 and 79:
Relays, Memory Areas and Constants
- Page 80 and 81:
Relays, Memory Areas and Constants
- Page 82 and 83:
Relays, Memory Areas and Constants
- Page 84 and 85:
Relays, Memory Areas and Constants
- Page 86 and 87:
Relays, Memory Areas and Constants
- Page 88 and 89:
Relays, Memory Areas and Constants
- Page 90 and 91:
Relays, Memory Areas and Constants
- Page 92 and 93:
Relays, Memory Areas and Constants
- Page 94 and 95:
Relays, Memory Areas and Constants
- Page 96 and 97:
Relays, Memory Areas and Constants
- Page 98 and 99:
Relays, Memory Areas and Constants
- Page 100 and 101:
Relays, Memory Areas and Constants
- Page 102 and 103:
Relays, Memory Areas and Constants
- Page 104 and 105:
Relays, Memory Areas and Constants
- Page 106 and 107:
Relays, Memory Areas and Constants
- Page 108 and 109:
Relays, Memory Areas and Constants
- Page 110 and 111:
Relays, Memory Areas and Constants
- Page 112 and 113:
Basic Instructions 2-2 CTi Automati
- Page 114 and 115:
Basic Instructions 2.1.2 Basic Func
- Page 116 and 117:
Basic Instructions 2.2 Number of St
- Page 118 and 119:
Basic Instructions Outline ST, ST/:
- Page 120 and 121:
Basic Instructions Outline Inverts
- Page 122 and 123:
Basic Instructions Outline OR: Conn
- Page 124 and 125:
Basic Instructions Outline Contact
- Page 126 and 127:
Basic Instructions Outline Leading
- Page 128 and 129:
Basic Instructions Outline Inverts
- Page 130 and 131:
Basic Instructions When blocks are
- Page 132 and 133:
Basic Instructions When blocks are
- Page 134 and 135:
Basic Instructions Description One
- Page 136 and 137:
Basic Instructions Outline DF: Turn
- Page 138 and 139:
Basic Instructions Caution is requi
- Page 140 and 141:
Basic Instructions Outline When a l
- Page 142 and 143:
Basic Instructions Outline SET: Whe
- Page 144:
Basic Instructions Outline This is
- Page 147 and 148:
Basic Instructions Setting the time
- Page 149 and 150:
Basic Instructions 3 With each scan
- Page 151 and 152:
Changing set values based on specif
- Page 153 and 154:
Timer set time The formula of the t
- Page 155 and 156:
Basic Instructions Directly specify
- Page 157 and 158:
Examples of applying direct specifi
- Page 159 and 160:
Basic Instructions Description The
- Page 161 and 162:
Basic Instructions Directly specify
- Page 163 and 164:
Basic Instructions Examples of appl
- Page 165 and 166:
Basic Instructions Description Shif
- Page 167 and 168:
Basic Instructions Outline Executes
- Page 169 and 170:
Basic Instructions Operation of dif
- Page 171 and 172:
Basic Instructions Outline Skips to
- Page 173 and 174:
Basic Instructions Differential ins
- Page 176 and 177:
Basic Instructions TM, CT, and SR i
- Page 178 and 179:
Basic Instructions Outline Stops ex
- Page 180 and 181:
Basic Instructions Outline Indicate
- Page 182 and 183:
Basic Instructions X0 Y30 X3 2 −
- Page 184 and 185:
Basic Instructions 2 − 74 CTi Aut
- Page 186 and 187:
Basic Instructions Description When
- Page 188 and 189:
Basic Instructions NSTL (Next step,
- Page 190 and 191:
Basic Instructions When you need to
- Page 192 and 193:
Basic Instructions You must be care
- Page 195 and 196:
SCLR Outline Reset multiple process
- Page 198 and 199:
Basic Instructions For the FP2/FP2S
- Page 200 and 201:
Basic Instructions Precautions duri
- Page 202 and 203:
Basic Instructions Syntax of interr
- Page 204 and 205:
Basic Instructions When another int
- Page 206 and 207:
Basic Instructions Interrupt progra
- Page 208 and 209:
Basic Instructions Interrupt progra
- Page 210 and 211:
Basic Instructions Control when mor
- Page 212 and 213:
Basic Instructions Outline Performs
- Page 214 and 215:
Basic Instructions Specifying contr
- Page 216 and 217:
Basic Instructions Example of enabl
- Page 218 and 219:
Basic Instructions 2 − 108 S2: HF
- Page 221 and 222:
FP2/FP2SH/FP10SH Input examples Bas
- Page 223 and 224:
FP2/FP2SH/FP10SH Basic Instructions
- Page 225 and 226:
FP2/FP2SH/FP10SH Basic Instructions
- Page 227:
FP2/FP2SH/FP10SH Example 1 for sett
- Page 230 and 231:
Basic Instructions Keyword setting
- Page 233:
FPΣ/FP−X/FP0R Basic Instructions
- Page 237:
FPΣ/FP−X/FP0R Basic Instructions
- Page 241:
FPΣ/FP−X/FP0R Basic Instructions
- Page 244:
Basic Instructions System registers
- Page 248:
Basic Instructions Outline Performs
- Page 252:
Basic Instructions 5 AN = AN AN >
- Page 256:
Basic Instructions Outline Performs
- Page 260:
Basic Instructions Outline Performs
- Page 264 and 265:
Basic Instructions 2 − 154 CTi Au
- Page 266 and 267:
High−level Instructions 3-2 CTi A
- Page 268 and 269:
High−level Instructions 3.1.2 Hig
- Page 270 and 271:
High−level Instructions 3-6 Examp
- Page 272:
High−level Instructions Outline C
- Page 276:
High−level Instructions Outline I
- Page 281:
F5 P5 High−level Instructions Out
- Page 285:
F6 P6 High−level Instructions Out
- Page 288 and 289:
High−level Instructions 3 − 24
- Page 291:
High−level Instructions Outline C
- Page 295:
F11 P11 High−level Instructions O
- Page 299:
FPΣ/FP−X/FP0R F12 Outline Reads
- Page 303:
FP0/FP−e P13 Outline Writes data
- Page 307:
FP2SH/FP10SH F13 P13 Outline Writes
- Page 313:
F15 P15 High−level Instructions O
- Page 317:
F17 P17 High−level Instructions O
- Page 321:
F19 LBL High−level Instructions O
- Page 325:
F21 P21 High−level Instructions O
- Page 329:
F23 P23 High−level Instructions O
- Page 333:
F26 P26 High−level Instructions O
- Page 337:
F28 P28 High−level Instructions O
- Page 341:
F31 P31 High−level Instructions O
- Page 345:
F33 High−level Instructions Outli
- Page 349:
F35 P35 (P+1) (+1) 16-bit data incr
- Page 353:
F37 (−1) 16-bit data decrement [D
- Page 357:
F39 P39 (PD*D) (D*D) 32-bit data mu
- Page 361:
F41 High−level Instructions Outli
- Page 365:
F43 (DB+) P43 (PDB+) High−level I
- Page 369:
F46 (DB−) 8-digit BCD data subtra
- Page 373:
F48 (DB−) P48 (PDB−) High−lev
- Page 377:
F51 (DB*) P51 (PDB*) High−level I
- Page 381:
F53 High−level Instructions Outli
- Page 385:
F56 (DB+1) 8-digit BCD data increme
- Page 389:
F58 High−level Instructions Outli
- Page 392 and 393:
High−level Instructions Explanati
- Page 395 and 396:
F61 (DCMP) P61 (PDCMP) High−level
- Page 397:
High−level Instructions Precautio
- Page 401:
F63 (DWIN) P63 (PDWIN) High−level
- Page 406 and 407:
High−level Instructions 3 − 142
- Page 409:
F66 (WOR) P66 (PWOR) High−level I
- Page 413:
F68 (XNR) P68 (PXNR) High−level I
- Page 417 and 418:
F70 (BCC) P70 (PBCC) High−level I
- Page 419 and 420:
High−level Instructions Applicati
- Page 421 and 422:
High−level Instructions Applicati
- Page 423 and 424:
High−level Instructions Explanati
- Page 425 and 426:
F72 (AHEX) P72 (PAHEX) High−level
- Page 427 and 428:
Conversion Example The following sh
- Page 429 and 430:
F73 (BCDA) P73 (PBCDA) High−level
- Page 431 and 432:
How to specify S2 S2 = H 0 0 Number
- Page 433 and 434:
F74 (ABCD) P74 (PABCD) High−level
- Page 436 and 437:
High−level Instructions 7 ASCII c
- Page 438 and 439:
High−level Instructions Explanati
- Page 440 and 441:
High−level Instructions Flag cond
- Page 442 and 443:
High−level Instructions Descripti
- Page 444 and 445:
High−level Instructions F77 (DBIA
- Page 446 and 447:
High−level Instructions Conversio
- Page 448 and 449:
High−level Instructions Descripti
- Page 450:
High−level Instructions F80 (BCD)
- Page 454:
High−level Instructions F82 (DBCD
- Page 460:
High−level Instructions F86 (DNEG
- Page 466 and 467:
High−level Instructions F90 (DECO
- Page 470:
High−level Instructions F91 (SEGT
- Page 473 and 474:
High−level Instructions Explanati
- Page 476:
High−level Instructions F93 (UNIT
- Page 480:
High−level Instructions Outline C
- Page 484:
High−level Instructions F96 (SRC)
- Page 488:
High−level Instructions F98 (CMPR
- Page 491:
F99 (CMPW) P99 (PCMPW) High−level
- Page 494:
High−level Instructions F100 (SHR
- Page 498:
High−level Instructions F102 (DSH
- Page 502:
High−level Instructions F105 P105
- Page 506:
High−level Instructions F108 (BIT
- Page 510:
High−level Instructions F110 (WSH
- Page 514:
High−level Instructions F112 (WBS
- Page 518:
High−level Instructions F115 (FIF
- Page 524:
High−level Instructions F117 (FIF
- Page 531 and 532:
F118 (UDC) Outline Sets the UP/DOWN
- Page 533 and 534:
High−level Instructions Precautio
- Page 537 and 538:
High−level Instructions 3 − 273
- Page 540:
High−level Instructions F121 (ROL
- Page 544:
High−level Instructions F123 (RCL
- Page 548:
High−level Instructions F126 (DRO
- Page 552:
High−level Instructions F128 (DRC
- Page 556:
High−level Instructions F131 (BTR
- Page 560:
High−level Instructions F133 (BTT
- Page 564:
High−level Instructions F136 (DBC
- Page 567 and 568:
High−level Instructions When the
- Page 569:
F138 High−level Instructions Outl
- Page 572:
High−level Instructions Descripti
- Page 575 and 576:
F141 (CLC) P141 (PCLC) High−level
- Page 577 and 578:
Precautions during programming The
- Page 579 and 580:
FP0/FP0R/FP−e/FPΣ/FP−X Availab
- Page 581 and 582:
FP2/FP2SH/FP10SH High−level Instr
- Page 584 and 585:
High−level Instructions Program a
- Page 586 and 587:
High−level Instructions Setting t
- Page 588 and 589:
High−level Instructions Operation
- Page 591 and 592:
FP2/FP2SH/FP10SH Preparation of tra
- Page 593 and 594:
FP2/FP2SH/FP10SH High−level Instr
- Page 595 and 596:
FP2/FP2SH/FP10SH Preparation of rec
- Page 597 and 598:
FP2/FP2SH/FP10SH High−level Instr
- Page 599 and 600:
FPΣ/FP−X/FP0R F145 (SEND) Data s
- Page 601 and 602:
FPΣ/FP−X/FP0R High−level Instr
- Page 603 and 604:
FPΣ/FP−X/FP0R F145 (SEND) Data s
- Page 607 and 608:
FPΣ/FP−X/FP0R High−level Instr
- Page 609 and 610:
FPΣ/FP−X/FP0R F145 (SEND) High
- Page 611 and 612:
FPΣ/FP−X/FP0R High−level Instr
- Page 613 and 614:
FPΣ/FP−X/FP0R High−level Instr
- Page 615:
2 Example of bit unit transmission
- Page 618 and 619:
High−level Instructions Sending d
- Page 620 and 621:
High−level Instructions (1) Speci
- Page 622 and 623:
High−level Instructions In this e
- Page 624 and 625:
High−level Instructions F146 (REC
- Page 626 and 627:
High−level Instructions Flag cond
- Page 628 and 629:
High−level Instructions F146 (REC
- Page 630 and 631:
High−level Instructions Explanati
- Page 632 and 633:
High−level Instructions Command 0
- Page 634 and 635:
High−level Instructions The SEND
- Page 636 and 637:
High−level Instructions Specifica
- Page 638 and 639:
High−level Instructions Command 0
- Page 640 and 641:
High−level Instructions F146 (REC
- Page 642 and 643:
High−level Instructions Specifyin
- Page 644 and 645:
High−level Instructions Sending d
- Page 646 and 647:
High−level Instructions (1) Speci
- Page 648 and 649:
High−level Instructions In this e
- Page 650 and 651:
High−level Instructions F147 (PR)
- Page 653 and 654:
Time chart Signal of output unit AS
- Page 656 and 657:
High−level Instructions F149 (MSG
- Page 658 and 659:
High−level Instructions With the
- Page 661 and 662:
Specifying S1 Intelligent unit with
- Page 664 and 665:
High−level Instructions Specifyin
- Page 667 and 668:
High−level Instructions Specifyin
- Page 669:
F153 (RMWT) Data write into MEWNET-
- Page 672 and 673:
High−level Instructions Precautio
- Page 674 and 675:
High−level Instructions Sampling
- Page 676 and 677:
High−level Instructions Sampling
- Page 678:
High−level Instructions Explanati
- Page 681:
High−level Instructions Explanati
- Page 684:
High−level Instructions F159 (MTR
- Page 687 and 688:
FPΣ/FP−X/FP0R High−level Instr
- Page 689 and 690:
FPΣ/FP−X/FP0R High−level Instr
- Page 691 and 692:
FPΣ/FP−X/FP0R Notes High−level
- Page 693 and 694:
FP2/FP2SH High−level Instructions
- Page 697 and 698:
FP2/FP2SH High−level Instructions
- Page 699:
F160 (DSQR) P160 (PDSQR) High−lev
- Page 703 and 704:
FP0/FPΣ/FP−X/FP0R Program exampl
- Page 705 and 706:
FP0/FPΣ/FP−X/FP0R Program exampl
- Page 707:
FP0/FP−e/FPΣ/FP−X/FP0R High−
- Page 710 and 711:
High−level Instructions Program e
- Page 712 and 713:
High−level Instructions 3 − 448
- Page 715 and 716:
FP0/FP−e/FPΣ/FP−X/FP0R Program
- Page 717 and 718:
FP0/FP−e/FPΣ/FP−X/FP0R For FP
- Page 719 and 720:
FP0R High−level Instructions To p
- Page 721 and 722:
FP0R *1: Specification of high−sp
- Page 723:
FP0R Explanation of program operati
- Page 726:
High−level Instructions High−sp
- Page 729:
FP0R Possible specification range f
- Page 732:
High−level Instructions Example o
- Page 735:
High−speed counter control flag v
- Page 738:
High−level Instructions Possible
- Page 741:
FP0R Example of target value match
- Page 744:
High−level Instructions Descripti
- Page 748:
High−level Instructions Descripti
- Page 752:
High−level Instructions 5 F169(PL
- Page 757 and 758:
FPΣ/FP−X 5 F171(SPDH) High−lev
- Page 759:
FPΣ/FP−X Operation modes Increme
- Page 763 and 764:
FPΣ/FP−X For FP−X Tr type Chan
- Page 766:
High−level Instructions (*4): Dev
- Page 769 and 770:
FP0R High−level Instructions The
- Page 771 and 772:
FP0R High−level Instructions Chan
- Page 773:
FP0R High−level Instructions Data
- Page 776 and 777:
High−level Instructions Image of
- Page 778:
High−level Instructions Assignmen
- Page 781 and 782:
FP0R High−level Instructions The
- Page 783:
FP0R Assignment of control code (Sp
- Page 786:
High−level Instructions For FP−
- Page 790 and 791:
High−level Instructions Precautio
- Page 793 and 794:
FPΣ/FP−X F173(PWMH) High−level
- Page 796 and 797:
High−level Instructions For FP0R
- Page 798:
High−level Instructions For FP−
- Page 802 and 803:
High−level Instructions 5 F174(SP
- Page 804:
High−level Instructions *1: Assig
- Page 807:
FPΣ/FP−X High−level Instructio
- Page 811 and 812:
FPΣ C32T2/FP−X High−level Inst
- Page 813 and 814:
FP0R Table of areas used FP0R Pulse
- Page 815:
FP0R High−level Instructions *2:
- Page 820 and 821:
High−level Instructions (*3): Tar
- Page 822 and 823:
High−level Instructions Table of
- Page 825 and 826:
FP0R 5 F178(PLSM) Input pulse measu
- Page 827:
FP0R A maximum of approx. 174.7 ms
- Page 831:
FP-e S2+1: Second word Specifies th
- Page 835 and 836:
5 F183(DSTM) High−level Instructi
- Page 837 and 838:
High−level Instructions 3 If the
- Page 839:
F190 (MV3) P190 (PMV3) High−level
- Page 843:
F215 (DAND) 32-bit data AND P215 (P
- Page 847:
F217(DXOR) P217(PDXOR) High−level
- Page 851:
F219(DUNI) P219(PDUNI) High−level
- Page 854:
High−level Instructions Descripti
- Page 862 and 863:
High−level Instructions 3 − 598
- Page 865:
F241(LINE) P241(PLINE) High−level
- Page 868 and 869:
High−level Instructions Specifyin
- Page 872 and 873:
High−level Instructions 5 F251(AT
- Page 874 and 875:
High−level Instructions Conversio
- Page 876 and 877:
High−level Instructions Particula
- Page 878 and 879:
High−level Instructions Flag cond
- Page 880 and 881:
High−level Instructions How data
- Page 883:
F258 (SADD) P258(PSADD) High−leve
- Page 887 and 888:
F260 (SSRC) P260(PSSRC) High−leve
- Page 889:
High−level Instructions F261 (RIG
- Page 893:
F263 (MIDR) P263(PMIDR) High−leve
- Page 897:
F265 (SREP) P265(PSREP) High−leve
- Page 901:
F271(DMAX) Maximum value search in
- Page 905:
F273 (DMIN) Minimum value search in
- Page 909:
F276 High−level Instructions Outl
- Page 913:
F278(DSORT) Sort data in 32-bit dat
- Page 917:
F283 (DSCAL) Scaling of 32−bit da
- Page 921:
F285(LIMT) P285(PLIMT) High−level
- Page 925:
F287(BAND) P287(PBAND) High−level
- Page 929:
F289(ZONE) P289(PZONE) High−level
- Page 933:
F300(BSIN) P300(PBSIN) High−level
- Page 937:
F302(BTAN) P302(PBTAN) High−level
- Page 941:
F304(BACOS) BCD type Arccosine oper
- Page 945:
F309(FMV) P309(PFMV) High−level I
- Page 949:
F311 (F−) P311 (PF−) High−lev
- Page 953:
F313(F%) P313(PF%) High−level Ins
- Page 957:
F315(COS) P315(PCOS) High−level I
- Page 961:
F317(ASIN) P317(PASIN) High−level
- Page 965:
F319(ATAN) P319(PATAN) High−level
- Page 969:
F321(EXP) P321(PEXP) High−level I
- Page 973:
F323(PWR) P323(PPWR) High−level I
- Page 977:
F325(FLT) P325(PFLT) High−level I
- Page 981:
F327(INT) P327(PINT) High−level I
- Page 985:
High−level Instructions F329(FIX)
- Page 989:
High−level Instructions F331(ROFF
- Page 993:
High−level Instructions F333(FINT
- Page 997:
F335(F+/−) Floating point real nu
- Page 1001:
High−level Instructions F337(RAD)
- Page 1005:
F345(FCMP) P345(PFCMP) High−level
- Page 1009:
F347(FLIMT) P347(PFLIMT) High−lev
- Page 1013:
F349(FZONE) P349(PFZONE) Outline Th
- Page 1017:
Outline Searches for a minimum valu
- Page 1021:
High−level Instructions F353(FSOR
- Page 1025:
5 F355(PID) Outline This instructio
- Page 1028 and 1029:
High−level Instructions 6 Output
- Page 1030:
High−level Instructions Operation
- Page 1033 and 1034:
High−level Instructions General e
- Page 1035 and 1036:
High−level Instructions Note) The
- Page 1037 and 1038:
High−level Instructions 2−1: Au
- Page 1039 and 1040:
High−level Instructions Precautio
- Page 1042:
High−level Instructions F374(DDTR
- Page 1046:
High−level Instructions F411 (CHG
- Page 1051 and 1052:
F416(PBFL) P416(PPBFL) High−level
- Page 1053 and 1054:
Chapter 4 Precautions Concerning Pr
- Page 1055 and 1056:
4.1 Changing the Set Value of Timer
- Page 1057 and 1058:
4.1 Changing the Set Value of Timer
- Page 1059 and 1060:
4.1 Changing the Set Value of Timer
- Page 1061 and 1062:
4.2 Use of Duplicated Output 4.2.2
- Page 1063 and 1064:
4.3 Leading Edge Detection Method P
- Page 1065 and 1066:
4.3.3 Precautions when Using a Cont
- Page 1067 and 1068:
4.4 Operation Errors 4.4.1 Operatio
- Page 1069 and 1070:
4.4.3 Dealing with Operation Errors
- Page 1071 and 1072:
4.5 Handling Index Registers 4.5.1
- Page 1073 and 1074:
4.5.3 Example of Using an Index Reg
- Page 1075 and 1076:
4.5 Handling Index Registers Inputt
- Page 1077 and 1078:
4.6 Handling BCD Data 4.6.1 BCD Dat
- Page 1079 and 1080:
4.7 Precautions for Programming Pro
- Page 1081 and 1082:
4.8.2 Cases Where Rewriting During
- Page 1083:
4.8.3 Procedures and Operation of R
- Page 1086 and 1087:
Precautions Concerning Programs 4.1
- Page 1088 and 1089:
Precautions Concerning Programs 4-3
- Page 1090 and 1091:
5-2 Appendix ......................
- Page 1092 and 1093:
Checking and changing the set value
- Page 1094 and 1095:
2. Hold types and non-hold type set
- Page 1096 and 1097:
FP0 5-8 Item Time setting Input set
- Page 1098 and 1099:
FP0 5-10 Item Input setting Address
- Page 1100 and 1101:
FP0 5-12 Item Tool port setting Too
- Page 1102 and 1103:
5-14 Item Address 417 418 Name Star
- Page 1104 and 1105:
FP0 Address Name Description R9013
- Page 1106 and 1107:
5.1.3 Table of Special Data Registe
- Page 1108 and 1109:
Address FP0 C10, FP0 T32 C14, C16,
- Page 1110 and 1111:
Address FP0 C10, FP0 T32 C14, C16,
- Page 1112 and 1113:
Address FP0 C10, FP0 T32 C14, C16,
- Page 1114 and 1115:
Address FP0 C10, FP0 T32 C14, C16,
- Page 1116 and 1117:
5.1.4 Table of System Registers for
- Page 1118 and 1119:
FP-e Interruptinput 5-30 No. Name 4
- Page 1120 and 1121:
5.1.5 Table of Special Internal Rel
- Page 1122 and 1123:
FP-e Relay No. Name Description R90
- Page 1124 and 1125:
5.1.6 Table of Special Data Registe
- Page 1126 and 1127:
FP-e (A: Available, N/A: Not availa
- Page 1128 and 1129:
FP-e (A: Available, N/A: Not availa
- Page 1130 and 1131:
FP-e (A: Available, N/A: Not availa
- Page 1132 and 1133:
PC (PLC) link 0 setting PC (PLC) li
- Page 1134 and 1135:
Transistor type C16 or over 5-46 Co
- Page 1136 and 1137:
5-48 Item Controller input time con
- Page 1138 and 1139:
WR901 FP0R Relay No. Name Descripti
- Page 1140 and 1141:
WR903 FP0R Relay No. Name Descripti
- Page 1142 and 1143:
WR906 FP0R Relay No. Name Descripti
- Page 1144 and 1145:
WR908 FP0R Relay No. Name Descripti
- Page 1146 and 1147:
WR910 FP0R Relay No. R9110 HSC-CH0
- Page 1148 and 1149:
Address Name Description DT90014 5-
- Page 1150 and 1151:
Address Name Description DT90037 DT
- Page 1152 and 1153:
Address Name Description DT90053 DT
- Page 1154 and 1155:
Address Name Description DT90060 DT
- Page 1156 and 1157:
Address Name Description DT90098 DT
- Page 1158 and 1159:
Address Name Description 5-70 FP0R
- Page 1160 and 1161:
Address Name Description DT90240 DT
- Page 1162 and 1163:
FP0R (A: Available, N/A: Not availa
- Page 1164 and 1165:
Address Name Description 5-76 FP0R
- Page 1166 and 1167:
5.1.10 Table of System Registers fo
- Page 1168 and 1169:
Highspeedcounter 5-80 No. Name 400
- Page 1170 and 1171:
Tool port setting COM 1 port settin
- Page 1172 and 1173:
5.1.11 Table of Special Internal Re
- Page 1174 and 1175:
WR902 Relay No. Name Description R9
- Page 1176 and 1177:
WR904 Relay No. Name Description R9
- Page 1178 and 1179:
WR907 Relay No. Name Description R9
- Page 1180 and 1181:
WR909 Relay No. Name Description R9
- Page 1182 and 1183:
(A: Available, N/A: Not available)
- Page 1184 and 1185:
(A: Available, N/A: Not available)
- Page 1186 and 1187:
(A: Available, N/A: Not available)
- Page 1188 and 1189:
(A: Available, N/A: Not available)
- Page 1190 and 1191:
(A: Available, N/A: Not available)
- Page 1192 and 1193:
(A: Available, N/A: Not available)
- Page 1194 and 1195:
(A: Available, N/A: Not available)
- Page 1196 and 1197:
FP-X Item PC (PLC) link W0-0 settin
- Page 1198 and 1199:
FP-X Tr type Add- Item ress Contro
- Page 1200 and 1201:
Note1) If the operation mode is set
- Page 1202 and 1203:
FP-X Ry type Add- Item ress Interr
- Page 1204 and 1205:
FP-X Item Address Name Default valu
- Page 1206 and 1207:
FP-X Item Controller input time con
- Page 1208 and 1209:
WR901 FP-X Address Name Description
- Page 1210 and 1211:
WR903 FP-X Address Name Description
- Page 1212 and 1213:
WR905 FP-X Address Name Description
- Page 1214 and 1215:
WR907 FP-X Address Name Description
- Page 1216 and 1217:
WR909 FP-X Address Name Description
- Page 1218 and 1219:
5.1.15 Table of Special Data Regist
- Page 1220 and 1221:
Address Name Description DT90022 DT
- Page 1222 and 1223:
Address Name Description DT90052 5-
- Page 1224 and 1225:
Address Name Description DT90053 DT
- Page 1226 and 1227:
Address Name Description DT90060 DT
- Page 1228 and 1229:
Address Name Description DT90098 DT
- Page 1230 and 1231:
Address Name Description 5-142 FP-X
- Page 1232 and 1233:
Address Name Description DT90240 DT
- Page 1234 and 1235:
FP-X (A: Available, N/A: Not availa
- Page 1236 and 1237:
FP-X Tr type FP-X (A: Available, N/
- Page 1238 and 1239:
FP-X Ry type FP-X (A: Available, N/
- Page 1240 and 1241:
FP2 (32K) Users memory capacity : 3
- Page 1242 and 1243:
For the FP2SH/FP10SH, the index reg
- Page 1244 and 1245:
Table of system registers for FP2/F
- Page 1246 and 1247:
FP2/FP2SH/FP10SH Item Hold/ Nonhold
- Page 1248 and 1249:
FP2/FP2SH/FP10SH Item Address Name
- Page 1250 and 1251:
FP2/FP2SH/FP10SH Add- Item ress Too
- Page 1252 and 1253:
Example 2: When system register 4 s
- Page 1254 and 1255:
FP1/FP-M/FP2/FP2SH/FP10SH/FP3 Addre
- Page 1256 and 1257:
FP1/FP-M/FP2/FP2SH/FP10SH/FP3 Addre
- Page 1258 and 1259:
FP1/FP-M/FP2/FP2SH/FP10SH/FP3 Addre
- Page 1260 and 1261:
FP1/FP-M/FP2/FP2SH/FP10SH/FP3 Addre
- Page 1262 and 1263:
FP1/FP-M/FP2/FP2SH/FP10SH/FP3 Addre
- Page 1264 and 1265:
5.1.18 Special Data Registers for F
- Page 1266 and 1267:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1268 and 1269:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1270 and 1271:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1272 and 1273:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1274 and 1275:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1276 and 1277:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1278 and 1279:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1280 and 1281:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1282 and 1283:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1284 and 1285:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1286 and 1287:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1288 and 1289:
FP2/FP2SH/FP3/FP10SH (A: Available,
- Page 1290 and 1291:
5-202 Name Boolean Symbol Descripti
- Page 1292 and 1293:
End 5-204 Name Boolean Symbol Descr
- Page 1294 and 1295:
5-206 Name Boolean Symbol Descripti
- Page 1296 and 1297:
5-208 Name Boolean Symbol Descripti
- Page 1298 and 1299:
Number 5-210 Name Boo-lean Ope- ran
- Page 1300 and 1301:
Number F63 P63 5-212 Name 32-bit da
- Page 1302 and 1303:
Number F94 P94 F95 P95 F96 P96 F97
- Page 1304 and 1305:
Num -ber F136 P136 5-216 Name Numbe
- Page 1306 and 1307:
Number F167 F168 F169 5-218 Name Hi
- Page 1308 and 1309:
Number 5-220 Name Boolean Operand D
- Page 1310 and 1311:
Number F235 P235 F236 P236 F237 P23
- Page 1312 and 1313:
Number F286 P286 F287 P287 F288 P28
- Page 1314 and 1315:
Number F329 P329 F330 P330 F331 P33
- Page 1316 and 1317:
Number 5-228 Name Boolean Ope- rand
- Page 1318 and 1319:
-Self-diagnostic Error This error o
- Page 1320 and 1321:
Error code E6 E7 E8 E9 E10 5-232 Na
- Page 1322 and 1323:
Error code E29 E30 E31 E32 E33 E34
- Page 1324 and 1325:
Error code E41 E42 5-236 Name Intel
- Page 1326 and 1327:
Error code E46 E47 E49 E50 5-238 Na
- Page 1328 and 1329:
� Table of MEWTOCOL-COM Communica
- Page 1330 and 1331:
5.5 MEWTOCOL-COM Communication Comm
- Page 1332 and 1333:
5.7 ASCII Codes 5-244 CTi Automatio
- Page 1334 and 1335:
Record of changes Manual No. Date D
- Page 1336:
CTi Automation - Phone: 800.894.041
Inappropriate
Loading...
Inappropriate
You have already flagged this document.
Thank you, for helping us keep this platform clean.
The editors will have a look at it as soon as possible.
Embed
Loading...
Delete template?
Are you sure you want to delete your template?
DOWNLOAD ePAPER
This ePaper is currently not available for download.
You can find similar magazines on this topic below under ‘Recommendations’.