The Book - Häfele

�����������
� Covers the ends of one piece of
wall track (above) or a �nished
look
� Cannot be used on tracks that
overlap above or below each other
� Attaches to the wall track with
attached dowels that slide into the
end of the track
� Size: W x H: 127 x 13 mm (5”x 1/2”
Material: plastic
Colour Item No.
black 792.00.320
Packing: 100 sets
Nail, for wall track installation
� Used as a temporary means to position the wall
track (above) on a wall
� Once position is determined, locate studs in the
wall and drill a 5 mm (3/16”) hole in thetop and
bottom channel of track to secure track with
screws (792.01.990)
� Size: 1.4 x 30 mm (1/16” x 1 3/16”)
Material:Body: steel; Colour: black Head: brass
Item No. Packing
792.01.997 1 pkg. (500 pcs.)
792.01.998 1 pkg. (50 pcs.)
Screw, Pan head
� Attaches the wall track (above) to studs
Material: steel
Colour Size Drive Item No. Packing
grey (regular) #10 x 2” phillips *792.01.990 1,000
steel (selftapping)
Regular
Phillips Drive
#10 x 2 1/2” combi 792.01.992
Mounting Tape
� Attaches the aluminum edge
� pro�le (above) to the wall track
� Cures in 72 hours at 68–72º
Material: acrylic
Size Item No.
12 mm (1/2”) x 16 m (54’) 792.01.995
*Packing: 10 rolls
Self-Tapping
Combi Drive
Bar Handle
Material: Center: aluminum matt
Ends: zinc; Colour: black
A C Item No.
188 mm (7 7/16”) 160 mm (6 5/16”) 111.95.063
412 mm (16 1/4”)
Packing: 24 pcs.
384 mm (15 1/8”) 111.95.069
1 pkg. (100
pcs.)
Order by phone, fax or internet
(P) 1.800.423.3531 (F) 1.888.646-4349
�����������������������������
Wall Track
� For organization of hooks, bins, and baskets
for garages, craft rooms, laundry rooms, etc.
� Can be used singly or con�gured into a panel
by seamlessly overlapping the tracks above
one another
� Cut with circular saw with a non-ferrous blade
� Attach tracks to studs in dry wall with pan
head screws, (below)
� Size: W x D X H: 2464 x 121 x 11 mm 97” x 4
3/4” x 1/2”)
Material: aluminum
Finish Item No.
matt aluminum 792.00.000
Packing: 6 pcs.
�����������
� Covers the ends of the wall track (above) for
a �nished look
� Attaches to the wall track with mounting tape
(below)
� Cut with circular saw with a non-ferrous
blade
� Size: W x H: 24 x 2438 mm (15/16” x 96”)
Material: aluminum
Finish Item No.
matt aluminum 792.01.000
Packing: 24 pcs.
Track Joiner
� Connects and aligns two
pieces of wall track together horizontally
� Insert two connectors into the square holes on
the end of one track and slide the two tracks together
Material: plastic
Colour Item No.
black 792.00.310
Packing: 300 pcs.
Shelf Stiffener
� Applies to the edge of 19 mm (3/4”) panel for added strength and
protection of edges
� Attaches to the panel by tapping on with a rubber mallet
� Size: 2438 mm (96”) Material: aluminum
Finish Item No.
matt aluminum
Packing: 8 pcs.
792.01.030
Extruded Handle
� Applies to the edge of a 19 mm (3/4”) door
� Attaches to the door by tapping on with a rubber
mallet
� Size: 2438 mm (96”)
Material: aluminum
Finish Item No.
matt aluminum 792.01.060
Packing: 8 pcs.
84