The Book - Häfele

More documents

Recommendations

Info

�� For wood or aluminum doors � Clip mounting without tools on pre-mounted bracket � Adjustable with a 10 mm (3/8”) hex key (not included) � Left or right mounted � 110º concealed hinges and mounting plates are required for installation (not included) �� Maximum opening angle 110º Material: zinc alloy; Finish: nickel-plated Version Item No. A 373.69.902 B 373.69.900 C 373.69.901 D 373.69.903 Packing: 10 pcs. (mounting brackets sold separately, below) 90º A (lbs.) B (lbs.) C (lbs.) D (lbs.) 300 (12”) 6.6 – 11.7 11.2 – 22.4 20.0 – 34.8 26.2 – 45.8 400 (16”) 5.1 – 8.8 8.4 – 16.7 15.2 – 26.2 19.6 – 34.3 500 (20”) 4.0 – 7.0 6.8 – 13.4 12.1 – 21.1 15.8 – 27.5 600 (24”) 3.3 – 5.9 5.7 – 11.2 10.1 – 17.4 13.2 – 22.9 700 (28”) 2.9 – 4.8 4.6 – 9.2 8.4 – 14.5 10.8 – 19.1 800 (32”) 2.4 – 4.4 4.2 – 8.6 7.5 – 13.0 9.7 – 17.2 900 (36”) 2.2 – 4.0 3.7 – 7.5 6.6 – 11.4 8.6 – 15.2 1000 (40”) 2.0 – 3.5 3.3 – 6.6 5.9 – 10.3 7.9 – 13.6 110º A (lbs.) B (lbs.) C (lbs.) D (lbs.) 300 (12”) 5.3 – 8.8 8.6 – 16.5 15.0 – 25.5 20.2 – 33.0 400 (16”) 4.0 – 6.6 6.4 – 12.3 11.2 – 19.1 15.2 – 24.6 500 (20”) 3.1 – 5.3 5.3 – 9.9 8.8 – 15.6 12.5 – 19.8 600 (24”) 2.6 – 4.4 4.2 – 8.4 7.3 – 13.0 9.9 – 16.7 700 (28”) 2.2 – 3.7 3.7 – 6.8 6.4 – 10.6 8.4 – 13.6 800 (32”) 2.0 – 3.1 3.1 – 6.2 5.7 – 9.5 7.5 – 12.3 900 (36”) 1.8 – 2.9 2.9 – 5.5 5.1 – 8.4 6.6 – 11.0 1000 (40”) 1.5 – 2.6 2.4 – 4.8 4.4 – 7.7 5.9 – 9.9 27 mm � Door weight for one �tting 75º A (lbs.) B (lbs.) C (lbs.) D (lbs.) 300 (12”) 8.4 – 15.6 14.7 – 30.1 26.2 – 26.4 33.9 – 60.1 400 (16”) 6.2 – 11.7 11.0 – 22.7 19.6 – 34.8 25.5 – 45.1 500 (20”) 5.1 – 9.5 9.0 – 18.3 15.8 – 27.5 20.7 – 35.6 600 (24”) 4.2 – 7.7 7.3 – 15.4 13.0 – 23.3 16.7 – 30.1 700 (28”) 3.5 – 6.6 6.2 – 12.5 11.0 – 19.4 14.3 – 25.1 800 (32”) 3.1 – 5.9 5.5 – 11.2 9.7 – 17.4 12.5 – 22.9 900 (36”) 2.9 – 5.3 4.8 – 10.1 8.8 – 15.4 11.4 – 20.0 1000 (40”) 2.4 – 4.6 4.4 – 9.0 7.9 – 13.9 10.1 – 18.0 �� 10 mm (3/8”) Material: steel; Finish: nickel-plated Item No. 008.28.100 Packing: 10 pcs. ® Dimensions in mm Inches are approximate �� For wood or aluminum doors � Clip mounting without tools on pre-mounted bracket � Adjustable with a 10 mm (3/8”) hex key (not included) � Left or right mounted � Doors over 600 mm (23 5/8”) wide should use 2 �ttings �� Maximum opening angle 75º Material: zinc alloy; Finish: nickelplated Version Item No. � 373.85.700 G 373.85.701 H 373.85.702 Packing: 10 pcs. (mounting brackets sold separately, below) m Cabinet Mounting Bracket Material: steel; Finish: nickel-plated Distance from edge Item No. 28 mm (1 1/8”) 373.69.907 37 mm (1 7/16”) Packing: 20 pcs. 373.69.906 �� close Material: zinc; Finish: nickel-plated Distance from edge Item No. 28/37 mm (1 1/8”/1 7/16”) Packing: 50 pcs. 373.69.799 �� For wood or aluminum door/frames over 35 mm (1 3/8”) wide. Material: steel; Finish: nickel-plated Item No. 373.66.681 Packing: 20 pcs. F �� G blue brown H black 400 (16”) 3.5-6.8 lbs. 6.6-11.6 lbs. 11.4-20.6 lbs. 500 (20”) 2.8-5.7 lbs. 5.5-9.2 lbs. 9.4-16.5 lbs. 600 (24”) 2.4-2.5 lbs. 5.0-9.2 lbs. 8.8-14.7 lbs. Weight chart is based on one lid stay. Weight shown can be doubled if using 2 stays. Mounting Brackets (required) 6.3 (1/4”) VARIANTA 5 18 (11/16”) 33 (1 5/16”) VARIANTA 5 Flat Head #6 32 (1 1/4”) 45 (1 3/4”)
® �� Minimum cabinet depth: 138 mm (5 7/16”) � For wood and aluminum framed doors � Door stays open at the position at which it is released � 3D door adjustment: +/- 3 mm vertical & horizontal adjustment Material: Arms & Rod: steel; Finish: matt chrome Brackets & Cover caps: plastic; Colour: silver Ral 9006 �� Door weight Item No. 3.3 – 8.8 lbs. 372.68.931 8.8 – 15.8 lbs. 372.68.932 14.3 – 25.3 lbs. 372.68.933 �� Door weight Item No. 4.4 – 7.7 lbs. 372.68.901 7.7 – 15.4 lbs. 372.68.902 14.3 – 24.2 lbs. 372.68.903 17.6 – 35.2 lbs. 372.68.904 �� Door weight Item No. 8.4 – 22.2 lbs. 372.68.913 13.2 – 33 lbs. 372.68.914 �� Door weight Item No. 7.7 – 22.2 lbs. 372.68.923 13.2 – 31.9 lbs. 372.68.924 Packing: 1 set (1 LH & 1 RH Arm, 2 standard door brackets, 2 cover caps, 1 mounting instruction) �� Order by phone, fax or internet (P) 1.800.423.3531 (F) 1.888.646-4349 � Minimum cabinet depth: 138 mm (5 7/16”) � For wood and aluminum framed doors � Door stays open at the position at which it is released � 3D door adjustment: +/- 3 mm vertical & horizontal adjustment Material: Arms & Rod: steel; Finish: matt chrome Brackets & Cover caps: plastic; Colour: silver Ral 9006 �� Door weight Item No. 4.4 – 8.8 lbs. 372.67.901 8.8 – 17.6 lbs. 372.67.902 11 – 22 lbs. 372.67.903 17.6 – 37.4 lbs. 372.67.904 Packing: 1 set (1 LH & 1 RH Arm, 2 standard door brackets, 2 cover caps, 1 mounting instruction) �� Can be cut to size with a standard chop saw � Calculation to cut the stabilizer rod: inside cabinet width less 78 mm (3 1/16”) = the desired length Material: aluminum, matt Length Item No. 477 mm (18 3/4”) 372.67.983 777 mm (30 9/16”) 372.67.985 1077 mm (42 3/8”) 372.67.987 Packing: 1 pc. Note: Order separately – not included in the �tting set. Door Mounting Bracket � For aluminum frame doors with narrow pro�les 35 mm (1 3/8”) or less Material: steel; Finish: matt chrome Cabinet thickness Item No. 5/8” 372.67.795 3/4” 372.67.796 Packing: 5 sets Note: Order separately – not included in the �tting set. �� 28
Page 1 and 2: The Book Fast Easy Ordering Guide f
Page 3 and 4: Dear Valued Customers, Welcome to o
Page 5 and 6: Length Metric Conversion Chart For
Page 7 and 8: Matt chrome A x B C Item no. 115 x
Page 9 and 10: Oil-Rubbed Bronze C M4 A x B x C D
Page 11 and 12: ��
Page 13 and 14: ��
Page 15 and 16: Round Washer Robertson® Lo-Root®
Page 17 and 18: ��
Page 19 and 20: ��
Page 21 and 22: ��
Page 23 and 24: ��
Page 25 and 26: ��
Page 27 and 28: ��
Page 29 and 30: ��
Page 31: 19 (3/4”) 1 (11/16”) 1 (11/16
Page 35 and 36: #6 ��
Page 37 and 38: ��
Page 39 and 40: ��
Page 41 and 42: ��
Page 43 and 44: Hangar Order Speci�cations � nu
Page 45 and 46: ��
Page 47 and 48: Grass-Dynapro ��
Page 49 and 50: ��
Page 51 and 52: ��
Page 53 and 54: Pull Out Pantry Cabinet dimensions
Page 55 and 56: Rotary Pantry Cabinet dimensions ß
Page 57 and 58: Swing Out Pantry Cabinet dimensions
Page 59 and 60: Base Cabinet Pull Out Cabinet dimen
Page 61 and 62: Item No. Description 1 547.37.851 R
Page 63 and 64: K150 Pull-Out Cabinet dimensions 16
Page 65 and 66: Twin Corner / Slide Corner© Cabine
Page 67 and 68: Wari Corner Cabinet dimensions Item
Page 69 and 70: Towel Rack, 2 bars, extendable �
Page 71 and 72: Öko centre � Container swings ou
Page 73 and 74: Pull-out Metal Frame � Load capac
Page 75 and 76: Waste Bins Broomstick Holder 12 1/2
Page 77 and 78: Elite Valet � For clothes hangers
Page 79 and 80: Valet � For clothes hangers and h
Page 81 and 82: ø6 25 6 7 29 17.5 2 22 Pan Head Wa
Page 83 and 84:
Wardrobe Lift � For attachment to
Page 85 and 86:
Laundry Hamper, slanted � Mount b
Page 87 and 88:
Hidden Bed Fittng Set for Twin Size
Page 89 and 90:
��
Page 91 and 92:
Tool Hooks � Hooks are used with
Page 93 and 94:
Base Cabinet Levelers � Upper sec
Page 95 and 96:
LED Lighting � LEDs produce more
Page 97 and 98:
Parameters for the effects of light
Page 99 and 100:
Low Voltage Lighting LED - Parallel
Page 101 and 102:
Switches LED - Parallel Series Note
Page 103 and 104:
Low Voltage Lighting LED - 12 Volt
Page 105 and 106:
Lighting LED - Serial Series A Spot
Page 107 and 108:
LED - Serial Series Bombay touch ve
Page 109 and 110:
Lighting LED - Serial Series 12 200
Page 111 and 112:
Aluminum Oxide Discs � Individual
Page 113 and 114:
EZ Touch Sanding Sponge � Aluminu
Page 115 and 116:
Touch-up Markers � Top quality Co
Page 117 and 118:
Laser - D2 � World’s smallest d
Page 119 and 120:
Festool Mobile Dust Extractor The b
Page 121 and 122:
Tradesmen Bar Clamp - Light Duty
Page 123 and 124:
Tape Measure � 5 m / 16 ft. Mater
Page 125 and 126:
ITEM No. Page No. ITEM No. Page No.
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Hinges- Institutional .............
Page 135:
Strike Plate for Glass ............
show all

The Book - Häfele

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?