Technical Design Report Super Fragment Separator

DRAFT
Figure 2.4.50: 3D model of the Super-FRS quadrupole magnet including holes and grooves. Indicated are
also the end chamfers.
Figure 2.4.51: BH-curve used in the 2D and 3D magnetic field calculations.
2.4.2.2.3 Superferric quadrupole magnets for the Energy Buncher
2D-Magnetic design
The quadrupole magnets for the Magnetic Spectrometer and Energy Buncher at the exit of the
Low-Energy Branch are superferric magnets having cold iron. The specifications of the quadrupoles
are listed in Table 2.4.14 and its cross section is shown in Figure 2.4.52.
49