TUNING LEVERS - Schaff Piano Supply Co.
TUNING LEVERS - Schaff Piano Supply Co.
TUNING LEVERS - Schaff Piano Supply Co.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
RESTRINGING TOOLS AND ACCESSORIES<br />
STRING LIFTER AND SPACER<br />
This tool has a new design in that the string lifter end has a 1-<br />
1/2” drop. Tool is 8” in overall length, chrome plated and has<br />
grooves for string spacing on one end.<br />
No. 146 - String Lifter and Spacer. Each<br />
STRING LIFTER AND SPACER<br />
For years, this tool has been our standard string lifter and<br />
spacer. Lifter end has a 1/2” drop. Tool is 7-1/4” long and<br />
chrome plated.<br />
No. 134 - String Lifter and Spacer. Each<br />
IMPACT COIL TIGHTENER<br />
An excellent tool for tightening coils. Place the tool around the<br />
pin under the coil, then slide the weight up. Or place the tool<br />
around the pin on top of the coil and slide the weight down.<br />
No. 3101 - Impact <strong>Co</strong>il Tightener. Each<br />
No. 3101A - Replacement Tip. (NOT SHOWN) Each<br />
STRING HOOK AND STRING LIFTER<br />
No. 3102 - String Hook and String Lifter. Each<br />
STRING LIFTER<br />
Ergonomically mounted to a wood handle for added comfort.<br />
Made of hardened steel and nickel plated.<br />
No. 3151 - String Lifter. Each<br />
HEAVY DUTY STRING LIFTER<br />
Hexagonal Stock, 8” overall.<br />
No. 3164 - Heavy Duty String Lifter. Each<br />
STRING SPACER<br />
Both ends of spacer are grooved to properly space the wires<br />
of 2 and 3 string unisons. Overall length 9”, chrome plated.<br />
No. 133 - String Spacer. Each<br />
<strong>TUNING</strong> PIN BUSHING PUNCH<br />
New, improved punch to drive wood tuning pin bushings into<br />
plate. End is pointed so that center of tuning pin hole can be<br />
marked for drilling. Hexagon shank is 3/8” diameter, punch is<br />
4-5/8” long and has a black oxide finish.<br />
No. 174C - Tuning Pin Bushing Punch. Each<br />
<strong>TUNING</strong> PIN PUNCHES<br />
All three punches are made from hardened, hexagon steel<br />
and are used for driving tuning pins into the pin block.<br />
Black oxide finish.<br />
No. 174 - Punch, 3” long, 1/2” diameter. Each<br />
No. 174A - Punch, 5” long, 1/2” diameter. Each<br />
No. 174B - Punch, 4-3/8” long, 5/8” diameter. Each<br />
<strong>TUNING</strong> PIN PUNCH<br />
Measuring 6” long with a 1/4” diameter punch, this tool is<br />
used for driving broken tuning pins out of the pin block.<br />
No. 173 - Tuning Pin Punch. Each<br />
BECKET BREAKER<br />
By placing this tool over the tuning pin with the end laying<br />
on the bass string or wire, a sharp blow with a hammer will<br />
easily break the string. This punch is made of high quality<br />
tool steel, blued finish and is 5” long.<br />
No. 278 - Becket Breaker. Each<br />
61
Change language