TUNING LEVERS - Schaff Piano Supply Co.

More documents

Recommendations

Info

REGULATING TOOLS ANGLED CAPSTAN SCREW WRENCH Similar to our Nos. 84A and 84B except that the open end has a 45 degree angle for ease of regulating the capstan underneath the key. 6” long, chrome plated. No. 84C - Angled Capstan Wrench, 3/16” wide opening. Each No. 84D - Angled Capstan Wrench, 1/8” wide opening. Each SQUARE CAPSTAN REGULATOR Fits most square shoulder capstan screws. Double bend facilitates positioning. No. 3112 - Square Capstan Regulator. Each OFFSET SQUARE CAPSTAN REGULATOR Fits most square shoulder capstan screws. No. 3113 - Offset Square Capstan Regulator. Each UNIVERSAL CAPSTAN SCREW REGULATOR For grands and uprights. Slotted end regulates Steinway, Baldwin and other pianos with square shouldered capstans. Pointed end regulates any capstan having a perforated head. 9” long, chrome plated. No. 86 - Universal Capstan Screw Regulator. Each STEINWAY CAPSTAN SCREW REGULATOR Measuring 7-1/2” long x 5/8” wide, this regulator is for Steinway piano capstans. Tool has both end openings measuring 5/16” wide and is nickel plated. No. 97 - Steinway Capstan Screw Regulator. Each GRAND ACTION SCREWDRIVER Made of fine quality tool steel, this 7” long screwdriver has a 1/8” wide shaft and blade that is black oxide. Plastic handle is 2” long. No. 193 - Grand Action Screwdriver. Each GRAND DAMPER WIRE EASER Used for releasing pressure on bushing cloth around damper wires without removing the damper. 3-1/2” long wooden handle with brass plated shaft makes the tool’s overall length 7-1/2”. No. 195 - Grand Damper Wire Easer. Each GRAND HAMMER BUTT SPACER For correctly spacing grand hammer shanks and hammer heads. The 6-1/2” long spacer has openings of 3/8” and 5/16” on either end. No. 196 - Grand Hammer Butt Spacer. Each MANNINO FLANGE/KEYFRAME TOOL This tool has 2 functions: spacing flanges and regulating keyframe glides. It was designed for servicing Kawai grand piano actions, but is equally suitable for work on any piano with a similar type of hammer flange, and for any action with balance rail glides having a tuning pin style tip such as Kawai, Steinway and Yamaha. No. 119 - Mannino Flange/Keyframe Tool. Each FENDON GRAND AND UPRIGHT BACKCHECK BENDER Through the help of fellow piano technician, Tom Fendon, we have improved our backcheck bender to be dual-purpose. One end of the tool bends wires forward or backward on grands, the other end is for upright backchecks. The upright end is notched out for access around the bridle wire. Tool is 6-1/4” long and chrome plated. No. 197 - Fendon Backcheck Bender. Each GRAND BACKCHECK REGULATOR Used to bend grand backcheck wires backward or forward. Case hardened steel, nickel plated. No. 3158 - Grand Backcheck Regulator. Each 45
46 TECHNICIAN'S TOOLS HAMMER VOICING TOOLS All three of these voicing tools have nickel plated, brass heads that allow for individual needle adjustment. Overall length is 5” including the 2-1/2” handle. No. 103A - Straight Head, 4 Needles. Each No. 103B - (NOT SHOWN) Straight Head, 3 Needles. Each No. 103C - (NOT SHOWN) Curved Head, 4 Needles. Each ADJUSTABLE HEAD VOICING TOOL Designed to be rotated into three different positions to accommodate individual voicing techniques. Overall length is 4-1/2” with a 2-1/2” handle. No. 105 - Adjustable Head Voicing Tool. Each ADJUSTABLE VOICING TOOL FOR COMBINATION HANDLE <strong>Schaff</strong> is the originator of this voicing tool to be used with a larger combination handle. Like our No. 105 Voicing Tool, this comes with 4 needles. 3” long. No. 104 - Voicing Tool For <strong>Co</strong>mbination Handle. Each VOICING TOOL Same as No. 3144W but not weighted, 3.50 oz. No. 3144 - Voicing Tool. Each WEIGHTED VOICING TOOL New style with heavily weighted handle. 5-3/8” long, exclusive of needles. Rosewood handle, 1-1/4” dia. X 4” long, 3 needles, 10 oz. With needle protector. No. 3144W - Weighted Voicing Tool. Each REPLACEMENT VOICING NEEDLES Can be used with any of the voicing tools. 20 pcs. per package of size No. 6 needles. 1-1/2” long. No. 107 - Replacement Voicing Needles. Per Pkg. GLOVERS VOICING NEEDLES An alternative to the conventional round needles, these English made, three cornered needles are preferred by some technicians. Needles are 1-1/2” long and are cornered for the lower 1/2”. Three sizes offered, 25 needles per package. No. 898A - Glovers Needles, Size No. 4. Per Pkg. No. 898B - Glovers Needles, Size No. 5. Per Pkg. No. 898C - Glovers Needles, Size No. 6. Per Pkg. HAMMER HEAD SMOOTHING IRON Must be heated to iron felt hammer heads. Polished brass head is 2-1/4” and overall length with hardwood handle is 7”. No. 113 - Hammer Head Smoothing Iron. Each ELECTRIC HAMMER HEAD SMOOTHING TOOL A Weller Mfg. soldering iron in either 40 or 80 watts used with a formed solid brass tip that evenly distributes heat for ironing felt hammer heads. 10” overall length. No. 905 - 80 Watt Electric Smoothing Iron. Each No. 905A - 40 Watt Electric Smoothing Iron. Each CURVED NOSE SCISSORS These scissors are perfect for cutting felt and cloth. 6” long, nickel plated. No. 164 - Curved Nose Scissors. Each CURVED NOSE FORCEPS These forceps have 1-1/4” long curved and serrated jaws that can be locked into place. Tool is 6” long, chrome plated. No. 162 - Curved Nose Forceps. Each TWEEZERS Invaluable to the technician for placing or removing punchings, bridle straps and center pins. Chrome plated. No. 160A - Tweezers, 6” long. Each No. 160C - Tweezers, 8” long. Each No. 160D - Tweezers, 12” long. Each
Page 1 and 2: 32 TUNING LEVERS HALE EXTENSION TUN
Page 3 and 4: SCHAFF TUNING LEVER HEADS These hig
Page 5 and 6: RUBBER WEDGE MUTES Made of durable
Page 7 and 8: 38 PETERSON TUNING DEVICES AUTOSTRO
Page 9 and 10: 40 REGULATING TOOLS COMBINATION TOO
Page 11 and 12: 42 REGULATING TOOLS KIMBALL LOST MO
Page 13: 44 REGULATING TOOLS DAMPER REGULATO
Page 17 and 18: LARGE SLOTTED SCREWDRIVER A slotted
Page 19 and 20: 50 TECHNICIAN’S TOOLS HALE BUSHIN
Page 21 and 22: SOUNDBOARD REPAIR CLAMP A small hol
Page 23 and 24: 54 TECHNICIAN’S TOOLS CENTER PIN
Page 25 and 26: 56 TECHNICIAN’S TOOLS 5-IN-1 ELEC
Page 27 and 28: 58 IMPORTED JAPANESE TOOLS R-23 R-3
Page 29 and 30: RESTRINGING TOOLS AND ACCESSORIES S
Page 31 and 32: RESTRINGING TOOLS AND ACCESSORIES C
Page 33 and 34: PLIERS REGULATING PLIERS A unique p
Page 35 and 36: 66 PLIERS REPINNING TOOL Made from
Page 37 and 38: 68 PLIERS HAMMER SHANK CUTTERS Comp
Page 39 and 40: 70 JARAS TOOLS FOR PRECISION CRAFTS
Page 41 and 42: 72 OTHER JARAS BEST SELLERS JARAS U
Page 43 and 44: GAUGES TORQUE WRENCH Slide marker s
Page 45 and 46: 76 GAUGES, WIRE AND PIN CLEANERS 6
Page 47 and 48: 78 DREMEL MULTI PRO ® TOOLS VARIAB
Page 49 and 50: 80 SHOP TOOLS HIGH TORQUE REVERSING
Page 51 and 52: 82 SHOP TOOLS 15-IN-ONE RATCHET SCR
Page 53 and 54: 84 SHOP TOOLS CLAMP-ON VISE This li
Page 55: 86 SHOP TOOLS ALLEN WRENCH SET 7 pi

TUNING LEVERS - Schaff Piano Supply Co.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?