Speer Handgun Ammo Magtech Handgun Ammo Hornady Pistol ...

Weaver Gunsmithing Tools
Weaver® Tool Kits - Whatever your skill level.
Whatever your needs. Weaver has a gunsmith tool
kit for you. Choose from among three tool kit models
containing professional-grade tools and attachments
for gun care and scope mounting work.
Deluxe Kit - Deluxe kit offers a robust 88piece
gunsmith set for the most advanced and
accomplished gunsmith
Order No. 029-849719 $45.50
Compact Kit - Compact Kit features
36 pieces to address the most common
gunsmith needs.
Order No. 029-849717 $11.50
Multi-Bit Kit - Multi Bit is a 77-piece
kit for just about any at-home maintenance
work.
Order No. 029-849718 $30.50
Diamond Needle Files - Gunsmiths, tool
and die makers, jewelers, stockmakers,
rely on EZE-LAP needle files to get the
job done. 5.5 inches (14 cm) overall
length O.A.L.) and shank diameter
of 0.118 inches (3 mm).
Round
Square
Threesquare
EZE-Lap Gunsmithing Tools
Half-round
Flat/Warding
Knife
Diamond Needle Files Fine (600 grit) -
Six files in wallet: Round, square, threesquare,
half-round, flat/warding and
knife. Order No. 081-600F $24.88
Compact
Kit
Weaver® Torque Wrench - Helps mount
scopes and bases with consistent screw pressure
to manufacturer’s specs. The Torque
wrench includes a variety of bits for different fasteners.
Also helps protect riflescope tubes from
over tightening. Features a magnetized tip that
secures bits and comes in a rugged storage
case. Order No. 029-849728 $36.50
Hand
Crossing
Barrette
Deluxe
Kit
Multi
Bit Kit
Weaver® SureThread Adhesive - For use when mounting scopes and
bases to assure locked-down optics. Prevents shock and vibration from
loosening screws. Loosens easily with basic hand tools
Order No. 029-849272 $7.56
Scope Mounting Kits - Containing everything needed for
precision scope mounting. Kits for the mounting professional
or beginner gunsmiths.
Deluxe Scope Mounting Kit (with 1-inch Lapping
Tools) Includes: Torque wrench, SureThread,
common bits, level system, lapping bar, 1 inch alignment
pins and lapping compound.
Order No. 029-849721 $63.75
Standard Scope Mounting Kit (w/o Lapping Tools)
Includes: Torque wrench, SureThread, common bits
and level system. DOES NOT HAVE LAPPING TOOLS
Order No. 029-849722 $53.75
Round Edge
Slitting
Pippin
Diamond Needle Files Coarse (250
grit) - Six files in wallet (select fine or
coarse). Hand, crossing, barrette, round
edge joint, slitting and pippin.
Order No. 081-607F $24.88
Altraco 12 Piece Needle File Set - Rockwell Hardness
C38-54 - With knurled handle - Set in wallet type plastic
pouch. Order No. 036-SNF12 $5.16
Hammers and Punches
Roll Pin
Brass Tapper- For delicate or precise tapping, use the knurled brass drift punch conveniently
stored inside the handle. Comes with three interchangeable heads (nylon,
brass and steel). Order No. 015-7031290 Price $13.23
Gunsmith Punch Sets- All Lyman Punches feature 4140 Molychrome Steel with
machine knurled grips and hardened tips. Gunsmith set features a complete set (1/16",
3/32", 1/8", 5/32", and 3/16") with 1/8" center punch and brass drift in a redwood case.
Pistol set includes 1/16", 1/8", 5/32", and brass punch. Deluxe Set in hardwood case
also includes a brass tapper hammer.
Pistol Punch Set Order No. 015-7031271 Price $12.16
Gunsmith's Punch Set Order No. 015-7031273 Price $18.06
Deluxe Hammer/Punch Set Order No. 015-7031298 Price $32.43
Roll Pin Punch Set- Ideal tools for removing hollow split roll pins. Special round nose
design allows proper alignment of punch in roll pin to prevent damage to fine mechanisms
such as trigger group parts. Set of 4 punches 1/16", 3/32", 1/8" and 5/32".
Order No. 015-7031277 Price $12.16
Hammer and 14 Punches Set -
This hammer and punch set includes the most
common size punches used for rifles, pistol and
shotguns. The steel handled brass hammer, brass
and polymer punches are housed in a sturdy polymer
pistol styled case.
Order No. 221-PM058 $30.00
Weaver® Hammer & Punch Set -
Includes (8) steel punches to fit just
about any pin and a hammer with
brass and plastic faces. For fast,
easy, gentle disassembly and
reassembly of firearms.
Order No.
029-849723 $15.10
Pachmayr 1911 Widget - This patented tool
makes assembly/disassembly of the 1911 type
semiautomatic pistols faster and easier. The
small end is used as an aid in getting the slide
stop back in place without scratching the frame.
Order No. 010-03471 $2.54
Altraco 13 Piece Punch Set - Includes Nomar
brass head hammer, all in a sturdy case.
Order No. 036-OPH10 $16.50
Brass Drifts- Set of two
knurled, solid brass punches. Drive out
gunsights and large pins without damage.
Diameters of 1/4” and 3/8” available.
Order No. 080-T0018 $16.24
A Must if you have a 1911!
147