catalogue produits - Biotech ortho

PRODUCT CATALOG

Presentation of Biotech International
A French company created in 1987, specialised in dental and orthopaedic implants as a manufacturer and exclusive
distributor.
Biotech International has been certified ISO 9001:2000 and NF EN ISO 13435:2004, and the whole of our range is
covered by the CE mark.
This mark guarantees that the products commercialised by Biotech International answer to the European regulation
in terms of manufacturing, traceability, safety, labelling, and packaging. Biotech International is also FDA approved.
All our products are the result of a close collaboration between surgeons, prosthetic laboratories, biomaterial specialists,
industrial professionals and our engineering department.
This way they truly reflect our approach: an exemplary quality for optimal usage.
Our worldwide presence offers us the opportunity to meet the expectations and demands of practitioners and
prosthesists coming from diffrent cultures and horizons.
Presentation of the « Orthopaedics » pole
A major stakeholder in the field of orthopaedics, Biotech International asserts itself as one of the main designers in
advanced fixation technologies.
Constantly innovating in order to extend the range of surgical applications, our engineers develop specific
products, both reliable and easy to integrate.
Specialists in the fixation of small fragments, we hold many patents in this field.
Furthermore, we work in close collaboration with many other foreign manufacturers for which we are the exclusive
distributors in France.
®
Dual
2

Orthopaedics range
Easylock® range
Omnitech® range
Memotech® System
Cross.Bone®
Summary charts
CONTENTS
- EasyLock® and Omnitech®.......................................................................................4
- EasyLock® screw VS Omnitech® screw...................................................................5
- DRV.........................................................................................................................6 - 7
- Elix..........................................................................................................................8 - 9
- XtremitiesXS...........................................................................................................10 - 11
- Xpode4...................................................................................................................12 - 13
- Xpode Carpal..........................................................................................................14 - 15
- Omnitech® Hand....................................................................................................16 - 17
- Omnitech®..............................................................................................................18 - 19
- Omnitech® Large....................................................................................................20 ........ .. ............ .........20 0 - 21 221
- Memotech®..............................................................................................................22 - 23
- Cross.Bone®............................................................................................................24
XXS Plate
- XXS Plate................................................................................................................25
- Ranges and indications..........................................................................................26
..................26 ......... . . ...
3

Easylock concept
The EasyLock® System makes it possible to choose the
direction of the screw within a range of +/- 10° from the
axis perpendicular to the plate and ensures immobilisation
at the end of tightening. The insert configuration
makes it possible to get a DCP effect if necessary.
The screws are integrated into the plate by means of
the inserts made of PEEK-Optima®, which give the
assembly certain flexibility, thus avoiding any osteolysis
around the screws. Removal of the equipment is
made easier by the use of standard 6-sided screwdriver
patterns.
No extra surgery time, and at the end an assembly
which is fully locked and in one piece, guaranteeing
perfect primary stability. Any risk of migration of the
screws is eliminated.
The Omnitech® range
The Omnitech® system is a set of screws which are used in several Biotech systems. The range includes four types of
screws used in the treatment of Scarf, Akin and Weil osteotomies.
This concept is a unique feature in hallux valgus surgery.
Thanks to the Omnitech® set, all surgical operations on the foot are possible. A full range of screws from 1,7 mm to
7,00 mm, all cannulated.
3 self tapping thread
Conical head
Standard Hex drive with 2mm depth
Conical form allows easier penetration into the distal
fragment where fracture reduction is not perfect.
Cannulation
2 conical self-tapping thread
4

Easylock® screw VS Omnitech® screw
VS V
VE2416 V2316
Innovations
Conical then rounded
under head
Pink for a 2,4 mm
diameter
The screw head
Fully conical
head
Blue for a 2,3 mm
diameter
Long Short
News
The colour
The threading
Biotech International is constantly innovating and developping
new orthopaedic systems to meet the market
demand.
Thus, the DRV plate is an osteosynthesis system for distal
fractures of the radius.
As for the Xpode® Carpal set, it offers greater possibilities
for treating arthrodesis thanks to its four new shapes of
cups.
Finally, the Omnitech® Hand system is a set of screws and
instruments more specifically designed for hand surgery.
And many others to be discovered during the year...
5

1
2
3
4
5
6
7
Detailed DRV set : K700
1
Volar distal radius
trial plates
FE220xxx
Screw forceps
PR000
Single trocar point K-wire
ø 1,2 mm L 100 mm
BR120
K-wire holder
SB000
and single trocar point K-wire
ø 0,8 mm, L80mm
BR080
Cannulated drill for
EasyLock screw ø 2,4 mm
FT240
Non cannulated drill for
EasyLock screw ø 2,4 mm
FT241
Non cannulated drill for
EasyLock screw ø 2,4 mm
FT241
5
7
9
11
13
8
9
10
11
12
13
4
3
6
8
10
12
EasyLock drill guide
for ø 1,6 mm drill
GM240
Screwdriver for EasyLock
screw ø 2,4 mm
TV240
Cannulated drill for
screw ø 3,5 mm
FT350
Non cannulated drill for
screw ø 3,5 mm
FT351
EasyLock drill guide
for ø 2,4 mm drill
GM350
Screwdriver for EasyLock
screw ø 3,5 mm
TV350
2
14
15
16
17
18
17 18
15
16
14
Depth gauge
JA00
K-wire bender ø 1,2 mm
TB120
Ergonomic quick-handle
A.O coupling
MV000
Volar distal radius plate benders
CR022
6

DRV
The DRV system is an osteosynthesis system for distal fractures of the radius.
It consists of plates and screws :
These plates are used with the
EasyLock® VENPS35XX Ø 3,5 mm
screws, sterile, non cannulated
(lengths from 14 to 24 mm every 2
mm except between 14 and 18 mm
every 1 mm) over the proximal part
and EasyLock VENPS24XX Ø 2,4 mm
screws, sterile, non cannulated
(lengths from 10 to 28 mm every 2
mm) over the distal part.
These screws are made of titanium
(TA6V ELI).
EasyLock® screws are also available
cannulated at 0,8 mm in the same
lengths : VE24XX (non sterile) or
VES24XX (sterile).
The range of DRV plates is intended to fix,
correct or stabilise several bone structures of
the forearm and the wrist articulation. It includes
6 plates altogether (by volar approach),
three right-hand and three left-hand, which
means three plate sizes per side.
The stainless steel plates (316LVM) have a large
radiolucent PEEK-Optima® distal insert.
Use of Ø 1,2 mm
K-wires
This plate is recommended in cases of :
Complex intra articular fractures of the distal radius
Complex extra articular fractures of the distal radius
Distal radius osteotomies
The styloidian end allows the use of
Ø 1,2 mm K-wires to stabilise the
styloidian fragment or fragments.
Large insert in PEEK-Optima® for Ø
2,4 mm screw
It can be bent or cut to size.
Insert for
Ø 3,5 mm screws
7

1
2
3
4
5
6
7
Detailed Elix® set : K500
Elix® screw for tibial osteotomy
VE53xx
Tibial osteotomy
Elix plate
left - P350401
right - P350402
Single trocar point K-wire
1,2 mm L 100 mm
2 mm L 150 mm
o
o
BR120
BR200
Osteotomy wedge trial
Length 25 or 30 mm
F25xxxx - F30xxxx
Pegs for distraction forceps
FI530
Drill guide for 3,2 mm drill
GM531
Drill guide for 3 mm drill
GM530
o
o
12
2 3
8
9
10
11
12
13
14
4
4
5
Graft impactor
PG530
Screwdriver for screw ø 5.3mm
TV530
Non cannulated drill ø 3.0mm
FT530
Non cannulated drill ø 3.2mm
FT531
Plate bending forceps for
Elix plate
PE530
Depth gauge
JA530
Trial’s extraction forceps
PF530
15
13 14
16
6 7
15
16
17
1
8
9
10
11
T handle
Quick A.O coupling
MV200
Distraction forceps
DS530
Plate bending forceps
for Elix plate
PE530
17
8

Elix®
The Elix® system is a system with screws and an angulated ated locking plate system for tibial opening ost osteotomy.
It consists of plates, screws and bone substitute:
The Elix® plate (PE350xxx) is intended to treat tibial osteotomy cases
thanks to a wide angulation choice according to requirements and there- therefore
allows perfect adaptation to patient anatomy. These anatomical plates
are made of stainless steel (316 LVM) and have an angulated lated screw locking
system. Also, the PEEK-Optima® inserts ensure screw locking g by self-tap-self-tapping
effect while permitting a choice of angulation for the screws.
The screw is locked onto the plate by means of the self-tapping conical
inserts.
This system makes it possible to angulate the screw with regard to the
plate by +/- 10°.
No part, no extra gesture is necessary for this manipulation.
The Elix® system is used with the EasyLock® VE53XX screws, non cannulated self-tapping
5,3 diameter screws(lengths from 24 to 40 mm every 2 mm and from 40 to 75 mm
every 5 mm)/ Their proximal self-tapping thread under the conical head ensures screw
locking to the plate.
These screws are made of titanium (TA6V ELI).
The VE53XX are sold non sterile.
Dual
Bon Bone substitute:
Thi This system also requires the use of a synthetic bone substitute,
Cro CrossBone® Dual (cf. page 24 : Bone substitute). This substitute
com comes in the form of a fully synthetic bi-porous wedge. It consists of
a central c macroporous area with interconnected pores for fast
ost osteosynthesis, and a dense peripheral area for high mechanical
stre strength. Unique bi-porous bone substitute available on the
market, its mechanical properties are very close to those of natural
bone.
Indications
The Elix® system is an osteosynthesis system for opening wedge tibial osteotomy. The assembly must
fill its function (resuming of weight-bearing and mechanical constraints) over a period of about 3
months, after which period the focus should normally have consolidated.
9

1
2
3
4
5
6
7
Detailed Xtremities XS set : K301
Detailed Xtremities XS set : K302
Xtremities XS screws
VE24xx
Xpode cups
C221001 - C180901
Xtremities XS plates
PE12xxxx
Plate bender for
Xtremities XS plates
PE000
Xpode cup holder
PC000
Non cannulated drill for
micro-nail-plate
FT241
Cannulated drill
FT240
4
7
9
1
5
6
8
10
3
2
13
8
9
10
11
12
13
14
11
14
12
Screwdriver
TV240
Easylock drill
GM240
Xpode countersink
FC022
K-wires holder SB000 +
simple trocar point K-wire
Ø 0,8 mm & L 80 mm
BR080
Screw forceps
PR000
Depth gauge
JA000
4
Ergonomic quick-handle
A. O. Synthès
MV000
7
4
9
15
1
5
10
6
8
3
15
13
2
Arthrodesis bur
FA000
14
11
12
4
10

Xtremities XS®
The Xtremities XS® cups is an arthrodesis cups intended specifically for foot and hand surgery. For this purpose, the
cups consists of two separate ranges: XS Plate, several sizes of plates to permit treating cases of arthrodesis of the foot,
and the Xpode4 range, a set of cups for surgery on the hand and the foot. They use the EasyLock® locking cups and
EasyLock 2,4 mm self-tapping cannulated screws.
XS Plates
REF. PE120201-02-03
REF. PE120501
REF. PE120601
This is a range of 5 different plates with 2, 5 or 6 holes.
These plates are specially designed to treat cases of metatarso-phalangeal arthrodesis. Thanks to their use, it is possible
for the patient to recover a foot which is painless, aesthetic and easy to fit with a shoe.
They can be bent and the 5 and 6 holes plates can be cut to size to allow perfect adaptation to patient anatomy.
The XS Plates are made of T60 with PEEK-Optima® inserts.
They are available sterile (PES120xxx) or non sterile (PE120xxx).
Xpode cups (cf. pages 12 and 13)
Screws
The implants in the Xtremities ii XS® range are used d with i h the h di diameter 24 2,4 mm EEasyLock® L screws, VENP24XX or
VENPS24XX, non cannulated. They are available in lengths of 10 to 28 mm every 2 mm.
The screws are available in cannulated version: sterile (VES24XX) or non sterile (VE24XX).
The Xtremities XS® plates are indicated in cases of:
- metatarso-phalangeal osteoarthritis at painful rigidus stage,
- rheumatoid polyarthritis where it is essential to restore an efficient first radius
- reops after failure of a previous surgery on the first radius of an evolved hallux valgus, complicated by
osteoarthritis, or in presence of large metatarsus varus, or for old or osteoporotic patients.
- reconstruction of the first radius: in this case, filling by cortico-medullar graft or bone substitute is often
necessary.
- calcanean osteotomies.
The Xtremities XS® cups are recommended in cases of :
- Lisfranc arthrodesis
- Talonavicular arthrodesis
-Cuneonavicular arthrodesis
11

1
2
3
4
5
6
Detailed Xpode® set : K310
Xpode® cups
C180901
C221001
Easylock® screws
VE24xx
Screw forceps
PR000
Xpode® cup bur
FC000
Easylock® drill guide for ø 1.6mm drill
GM240
Screwdriver
TV240
4
5
6
7
8
9
1
7
8
9
10
11
12
3
Non cannulated drill
FT241
Non cannulated drill
FT241
Cannulated drill
FT240
Xpode® cup holder
PC000
Depth gauge
JA000
Ergonomic quick-handle
A.O coupling
MV000
13
2
K-wire holder
+
single trocar point K-wire
Ø 0,8 mm & L 80 mm
SB000 + BR080
10
11
12
13
12

Xpode®4
The Xpode®4 system is an arthrodesis system intended for hand surgery.
C180901
an 18 mm diameter
9-hole cup
The Xpode®4 range includes two cups:
Easylock® system
These cups are made of PEEK-Optima®, which allows optimal radiological control thanks to its radiolucent
property. They use the EasyLock® system, which makes it possible to choose the direction of the screw within a
range of +/- 10 ° from the perpendicular axis of the cup surface and ensuring locking after tightening.
They are delivered non sterile.
The Xpode®4 system screws are made of titanium TA6V ELI and are non cannulated.
The cups are used with the diameter 2,4 mm osteosynthesis EasyLock® screws, available from lengths of 10 to
28 mm, every 2 mm.
They are available in sterile version, VENPS24XX or non sterile, VENP24XX.
They also are available cannulated at 0,8 mm, sterile (VES24XX) or non sterile (VE24XX).
Indications
The Xpode®4 system cups are recommended in cases of :
partial carpal arthrodesis
Lisfranc arthrodesis
talonavicular arthrodesis
cuneonavicular arthrodesis
The installation procedure is simple and rational. No extra surgery time is
required. At the end, excellent primary stability is obtained thanks to the
one-piece locked assembly. Thus, any risk of screw migration is avoided.
C221001
a 22 mm diameter
10-hole cup
13

1
2
3
4
5
6
7
8
Detailed Xpode® Carpal set: K320
Xpode® cup
ø 22 mm, 6 holes, 3 bones
C220601
Xpode® cup
ø 18 mm, 4 holes, 2 bones
C180401
Xpode® cup trial
ø 22 and 18 mm
F220601, F180401
Xpode® trial cups handle
MF000
Xpode® Cup ø 14 mm, 7 holes
C140701
Xpode® Cup ø 18 mm, 9 holes
C180901
Xpode® Cup ø 22 mm, 10 holes
C221001
Xpode® trial
ø 14, 18, 22 mm
F140701, F180901, F221001
9
11
13
15
1 2
3
9
10
11
12
13
14
14
10
12
21
Xpode® countersink
ø 22 mm
FC022
Xpode® countersink
ø 18 mm
FC018
Xpode® countersink
ø 14 mm
FC014
EasyLock® drill guide for
ø 1,6mm drill
GM240
Non cannulated drill ø 1,6 mm for
EasyLock® screw ø 2,4 mm
FT241
Cannulated drill for EasyLock®
screw ø 2,4 mm
FT240
4
5 6 7
8
15
16
17
18
19
20
21
16
17
18
19
20
Screwdriver for EasyLock®
screw ø 2,4 mm
TV240
K - wire holder
SB000
and simple trocar point K - wire
ø 0,8 mm, L80 mm
BR080
Depth gauge
JA000
Ergonomic handle - quick A.O coupling
MV000
Xpode® cup holder
PC000
Screw forceps
PR000
Single trocar point K-wire
L230 mm ø 1,6 mm
BR160
14

New product : Xpode® Carpal
The Xpode® Carpal system is an arthrodesis cup system intended for hand surgery.
The two Xpode®4 system cups : the Xpode®4 range includes an 18 mm diameter 9-hole plate and a 22 mm
diameter 10-hole plate. These cups are made of PEEK-Optima®. The radiolucent property of this material permits
an optimum radiological control. Furthermore, the mechanical characteristics of the PEEK are similar to those of
natural bone. (They are multi-positionable, which means that they have been designed to respond to requirements
concerning hand, foot, or ankle surgery).
C180401
Indications:
C220601
The four new cup shapes :
They increase the possibilities regarding arthrodesis treatment, particularly for 2 or 3 bone arthrodesis, where
the Xpode4 cups were sometimes badly adapted.
C140701 : this is a 14 mm diameter 7 hole cup.
C180401 : this was created from an 18 mm diameter cup. It has 4 holes and is particularly adapted to arthrodesis
of two bones.
C180601 : this was created from an 18 mm diameter cup. It has 6 holes and is particularly adapted to arthrodesis
of three bones.
C220601 : this was created from a 22 mm diameter cup. It has 6 holes and can be used to treat cases of arthrodesis
of three bones.
The Xpode® Carpal system cups are used with the EasyLock® VENPS24XX, 2,4 mm in diameter, non cannulated and
10 to 28 mm long every 2 mm. Using the EasyLock principle makes it possible to choose the direction of the screw
over a range of +/- 10 ° from the perpendicular axis of the cup surface, and ensure locking after screw-tightening.
The screws are made of titanium (TA6V ELI).
They are also available non sterile (VENP24XX) in non cannulated or in cannulated at 0,8 mm, sterile (VES24XX or
non sterile (VE24XX).
The Xpode® Carpal set is indicated in various cases of
arthrodesis:
Scapho-trapezo-trapezoid
Scapho-capitate
Radio-scapho-lunate
Capito-lunate
Scapho-luno-capitate
Radio-lunar
4 bones
Luno-capito-hamatal
Hamato-metacarpal
…
C140701
15

1
2
3
4
5
6
7
Detailed Omnitech® nitech® Hand set : K2000
Cannulated screw ø 1.7 mm
0.6 mm K-wire
V17xx
Cannulated screw ø 2.3 mm
0.8 mm K-wire
V23xx
Cannulated screw ø 3.0 mm
1.2 mm K-wire
VC30xx
Cannulated screw ø 3.5 mm
1.2 mm K-wire
VC35xx
Ergonomic quick-handle
A.O coupling
MV000
Single trocar point K-wires
ø 1,2 mm L 100 mm ( 3×1.2)
BR120
K-wire holder SB000
+simple trocar point K-wire
ø 0.8 mm, L80 mm
BR080 (x3)
ø 0.7 mm, L80 mm
BR070 (x3)
17
8
9
10
11
12
13
14
15
14
16
1
2
3
4
15
10
22
18
5
21
Countersink for ø 1.7 mm screw
FR170
Screwdriver for ø 1.7 mm screw
TV170
Bone reduction clamp ø 0.70 mm
K-wire guide
DA170
Cannulated coutersink for ø 3.0 mm screw
1.2 mm K-wire
FR300C
Cannulated screwdriver for ø 3.0/3.5 mm,
screws - 1.2 mm K-wire
TV300C
Cannulated countersink ø 3.5 mm screw,
1,2 mm K-wire
FR350C
Cannulated drill for ø 2.3 mm screw
FT230
Countersink for ø 2.3 mm screw
FR230
9
8
12
7
13
11
6
20
19
16
17
18
19
20
21
22
Screwdriver for ø 2,3 mm screw
TV230
Screw forceps
PR000
K-wire guide for ø 0,70 mm
K-wires
GB070
Cannulated drill for ø 3.5 mm screw,
1,2 mm K-wire
FT350C
Cannulated drill for ø 3.0 mm screw,
1.2 mm K-wire
FT310C
K-wire gauge for screw
cannulated at 0.8mm
JD000
K-wire gauge for screw
cannulated at 1.2mm
JD000
16

Omnitech® Hand
The Omnitech® Hand system is a set of screws and instruments intended for hand surgery. The four osteosynthesis
cannulated screws are the implants for the system.
Diameter 1,70 mm
Cannulation 0,7 mm
Length from 8 to 15 mm
Self perforating and self-tapping
Percutaneous installation
Diameter 2,30 mm
Cannulation 0,80 mm
Self-tapping
Length from 10 to 28 mm
Diameter 3,00 mm
Cannulation 1,20 mm
Self-tapping
Length from 10 to 32 mm
Diameter 3,50 mm
Cannulation 1,20 mm
Self-tapping
Length from 14 to 45 mm
V17
V23
This screw is identical to the one in the e Omnitech system
y
VC30
VC35
These screws are recommended nded in cases of :
Osteosynthesis of micro fragments ragments (V17)
Scaphoid fracture (V23, VC30)
Partial arthrodesis (VC30, VC35)
17

1
2
3
4
5
6
7
8
9
10
Detailed Omnitech® set : V100
Detailed Omnitech® set : K110
Metatarsal Scarf osteotomy screw
V30xx
Depth gauge
JA000
Phalangeal osteotomy dynamic
nail-plate fixation and screw
A23xx
Bone holding forceps
DA000
Screw forceps
PR000
Guide for micro nail plate
VA000
Phalangeal osteotomy screw
V23xx
Bone lever
SP000
Non cannulated drill for micro nail plate
FT150
Ergonomic handle - quick A. O. coupling
MV000
1
2
10
9
3
11
12
13
14
15
16
17
18
19
11
Single trocar point K-wire + K-wire holder
Ø 0,8 mm & L 80 mm
SB000
BR080
Screwdriver for screw Ø 3 mm
TV300
Countersink for screw Ø 3 mm
FR300
Non cannulated drill for Ø 3 mm
FT301
Cannulated drill for screw Ø 3 mm
FT300
Screwdriver for screw Ø 2,3 mm
TV230
Countersink for screw Ø 2,3 mm
FR230
Cannulated drill for screw Ø 2,3 mm
FT230
Weil’s osteotomy screw
V20xx
6
4
7
5
10
2
8
20
6
13
15
17
8
9
18
20
17
12
16
14
19
16
14
18
15
13
12
20
Screwdriver for screws s Ø 2 mm
TV200
5
11
4
13
18

Omnitech®
The Omnitech® system is an osteosynthesis system intended mainly for surgery of the forefoot and hand surgery.
The Omnitech® range includes four types of screws used in the treatment of Scarf, Akin and Weil osteotomies. They are a unique
concept in hallux valgus surgery.
The osteotomy screws, P1, Weil, Scarf are compressive conical head screws, ws, a design which ensures locking of the screw on
the last
thread. Furthermore, the risk of fracture is reduced, the compression more e progressive and ablation made easier.
The Omnitech® system screws are made of titanium (TA6V ELI).
They are available in sterile or non sterile version. The nail-plate late is pure T60 titanium. tita anium. an
Green screw (for Weil osteotomies): 2,0 mm diameter
screw, non cannulated and self-drilling. Lengths
available from 11 to 14 every 1 mm.
Blue screw (for phalangeal osteotomy): 2,3 mm
diameter screw, cannulated (k-wires 0,8 mm). The
lengths available go from 12 to 28 mm every 2
mm.
Yellow screw (for metatarsal osteotomy): 3 mm
diameter screw, cannulated (k-wires 0,8 mm).
Lengths available from 10 to 40 mm every 2 mm. The
inter fragmentary compression is maximum, permitting
early return of weight-bearing and« per priman»
consolidation.
Micro nail-plate (for phalangeal osteotomy): my ):
nail-plate and 2,3 mm diameter screws. Lengths hs
available from 11 to 14 mm every 1 mm. This allows ws
extending indications of phalangeal osteotomy to o
bones weakened by previous surgery or serious us
demineralisation, or to operations requiring a lot of
shortening (bicorticalphalangeal osteotomy).
V20
V23
This screw is identical to the one in the O.H system
V30
A23
The cannulation of these screws makes their placement easier sier thanks to the K-wire guide.
The implants can be used on a permanent t or temporary basis in the following corrections:
Yellow screws: first radius s Scarf metatarsal osteotomies
Blue screws: first radius phalangeal h l l osteotomies
Green screws: Weil type osteotomies
Grey screws and micro nail-plate : first radius phalangeal osteotomies
Intended for surgery of the forefoot, the Omnitech implants can also have other applications, particularly for
hand surgery:
Yellow or blue screws: scaphoid fracture, scaphoid pseudoarthrosis.
19

Detailed Omnitech® tech Large set : K600
1
2
3
4
5
6
Omnitech® screw Ø 4,5 mm
V45xx
Omnitech® screw Ø 7 mm
V71xx
Single trocar point K-wire
L 230 mm & Ø 1,6 mm
BR160
Single trocar point K-wire
L 230 mm & Ø 2 mm
BR200F
Screwdriver for
Ø 4,5 mm & Ø 7 mm screws
TV700
Countersink for Ø 4,5 mm screws
FR450
3
4
5
6
7
8
9
10
1
7
8
9
10
11
12
11
Countersink for Ø 7 mm screws
FR700
Cannulated drill for Ø 4,5 mm screws
FT450
Cannulated drill for Ø 7 mm screws
FT700
K-wire depth gauge for
Ø 4,5 mm et Ø 7 mm screws
JA700
Protection sleeve for
percutaneaous surgery
GM700
T handle A.O. Synthes
MV200
2
12
20

Omnitech® Large
Large
The Omnitech® Large system is an osteosynthesis system for large bone surgery (femur neck, pelvis, tibial plate, calcaneus, sub-talar
arthrodesis).
It comes as a complement to the Omnitech® system in order to extend the osteosynthesis screw system to certain pathologies and
traumas touching the ankle, knee, hip, etc.
This system consists of two ranges of screws, respectively diameters 4,5 5 an 7,0 mm. The 7,0 mm diameter screws are available a with a
16 or 32 mm distal thread.
V71XX / VS71XX : 7,0 mm diameter screw,
cannulated at 2 mm, thread 16 mm.
Available in lengths from :
60 to 64 mm every 2 mm,
68 to 88 mm every 4 mm.
V45XX / VS45XX : 4,5 mm diameter screw,
cannulated at 1,6 mm, thread 16 mm.
Available in lengths from:
26 to 44 mm every 2 mm,
48 to 64 mm every 4 mm.
VS70XX : 7,0 mm diameter screw,
cannulated at 2 mm, thread 32 mm.
Available in lengths from :
84 to112 mm every 4 mm.
The implants can be used on a permanent or temporary basis in the following corrections:
V71XX / VVS71XX
Non Sterile
/ Sterile
V45XX V45XXX
/ VVS45XX
Non Sterile Stterile
/ Sterile
VS70XX VVS70XX
Sterile
The head of the Omnitech® Large screws is conical. It permits applying ying a high torque which leads to strong compression between betwe the
two fragments.
It increases the contact surface with the cortical, avoids going through ough it and therefore loosing all the compression (which is oft often the
case with a cylindrical head).
Furthermore, the head of the Omnitech® Large screw is threaded, which gives it an anti-return effect (no «back-out»). Cannulation Cannula of
the screws ensures safety in guiding the preparation instruments and placement of the implants.
The distal self-tapping conical part of the screw makes it easier the e insert into the distal fragment of the the second second fragment fragment. Its double d
thread provides a compression effect thanks to the difference in pitch.
The Omnitech® Large system screws are made of titanium (TA6V ELI).
- Blue screw / 4,5 mm diameter: fracture of the tibial plate percutaneously or under arthroscopy, tibia osteotomy and epiphysiodesis,
tibotalar arthrodesis, tibia fracture (epiphysis, diaphysis, metaphysis), talonavicular arthrodesis.
- Yellow screw / 7,0 mm diameter: percutaneous screwing of femur neck fracture, epiphysiodesis of the lower end of the femur,
screwing of an inter condylian fracture, arthrodesis of the torsion torque, sub-talar arthrodesis, tibiocalcaneal arthrodesis.
These screws can also be used in other osteosynthesis indications, in particular for femoral head fractures.
They can be used for direct or guided screwing.
21

1
2 3 4
5 6
7
8
Detailed Memotech® set : AMF000
Surgical mallet
MA1021
Depth gauge
Non cannulated dril for
long Ø 2 mm screws
FT311
Single trocar point K-wire
Ø 2 mm L 60 mm
BR260
JA000
2
7
1
Sight entraxe adjustable
VA001
5
8
6
9
10
9 10
11
3
Deported impactor for AMF
Pinch door-stable
PA000
IA000
4
®
11
22

Memotech®
The Memotech® system is a compact system which permits carrying out the most frequent extremities osteosynthesis.
The e system implants are hot shape memory staples, meaning that they take their shape after being heated. There are
two o types of staples which answer to the variety of cases met.
H1
These hese orthopaedic compressive shape memory implants have three main properties.
They hey ensure :
a permanent compression, studied as a function of the implant cross section, encouraging better bone
restoration estoration and reducing pain.
an excellent retention to avoid implant migration after the operation.
a perfect biocompatibility of the titanium based martensitic transformation material, proved by many
studies in various fields such as orthopaedic and vascular surgery.
These staples are available in several lengths:
H2
Bicortical Staple Monocortical staple
Monocortical staple: Lengths 10, 11, 12, 13, 15, 17 mm for an H1 height of 10 mm and
an H2 of 10 mm also.
Bicortical staple: It exists in lengths of 10 or 12 mm. For each of these lengths, three
H1/H2 torques exist: 15/13 mm, 17/15 mm, 19/16 mm.
The Memotech® system staples are made of titanium nickel alloy.
They are delivered sterile on a PE UHMW support base.
The hot shape memory staples are indicated in
the following cases :
Shortening osteotomy
Correction osteotomy
Arthrodesis
Fracture reduction
®
23

CrossBone
The CrossBone is an implantable bone substitute, made of 60% hydroxyapatite and 40 % β-tricalcium phosphate. The
very high temperature frittering process and the absence of substances of animal origin eliminate any risk of infectious
contamination.
Its micro-architecture is innovative in that it offers not only a large number of interconnections between the pores, of
which the minimum size is adjusted, but also a very even distribution.
CrossBone comes in the form of blocks and granules, or in a syringe :
Bloc
Dual
Granules
The wedge is recommended for:
Surgical treatment of fractures and pseudoarthrosis
Vertebra arthrodesis
The granules are recommended in cases of:
Cotyloidal reconstruction
Cavity filling
The Cross.Bone blocks and granules play a
part in bone reconstruction in the case of
more or less loss of bone substance. The
blocks can be cut to the exact size need to fill
the cavities.
The Cross.Bone syringe allows bone substitute
to be used in difficult areas to reach and
provides greater precision when filling bone
cavities.
Cross.Bone Dual : This type of bone substitute
comes as a 100% synthetic biporous
wedge. It is surprisingly close to the structure
of natural bone. Indeed, this osteotomy
wedge has a macro-porous central area and a
denser peripherical area. This substitute is
used with the Elix system to fill the tibial
opening osteotomy.
The syringe makes it possible to fill small bone defects. It is used for difficult to reach areas.
24

Xtremities XXS plate
The XXS Plate® system is a newcomer in the EasyLock® locking g co concept, ncep intended for hand surgery.
Metacarpal left plate (PE100501)
Metacarpal right plate (PE100502)
Self-breakable plate allowing
the positioning of the plate
through a mini open portal
Xtremities XXS screws
PE100501
PE100401
It’s a self-tapping, alloyed Titanium screw.
It is non cannulated and its diameter is 1.7mm.
Available from 6 to 16 mm long.
It allows either a mono-cortical or a bi-cortical implantation.
The screws are available sterile.
The XXS plates are indicated in cases of:
- Phalangeal fractures
- Metacarpal fractures
PE100502
All the XXS plates are 1 mm thick.
They are made of T60 with PEEK-Optima® inserts
They are available sterile
Multi-purpose plate which can
be cut and gives the surgeon the
possibility of getting several
plates shapes :T-shape plate, 2
types of L- shape, Y-shape plate,
small chain plates.
PE101801
25

Indications
Référence
Name
Indications for the EasyLock & Omnitech systems
Others
Foot
Hand
O M N I T E C H
Forefoot osteotomies or fractures -
Scarf osteotomy (Hallux Valgus) -
Phalangeal osteotomy -
Weil osteotomy
V100
Omnitech
Scaphoid fracture
K110
Omnitech
Instrumentation
Set
List of indications non exhaustive
Pelvis fracture - femoral neck fracture -
Distal femoral fracture - tibial plateau fracture -
Humeral head fracture -
Olecranon fracture
Sub-talar arthodesis -
Calcaneum fracture
K600
Omnitech Large
Osteochondrale fracture -
Small fragments fracture
Weil osteotomy
Phalangeal fracture - Scaphoid fracture -
Partial arthrodesis
K2000
Omnitech Hand
Olecranon fracture -
Small fragments fracture
E A S Y L O C K
Basimetatarsal bifocal or basiphalangeal
osteotomy (Hallux Valgus) -
Metatarso-phalangeal arthrodesis -
Lisfranc arthrodesis -
Talonavicular arthrodesis -
Calcaneum osteotomy -
Cuneonavicular arthrodesis
K301
Xtremities XS
Partial carpal arthrodesis -
Radio-scapho-lunar arthrodesis
K302
Phalangeal fractures -
Metacarpal fractures
K250
XXS
Lisfranc arthrodesis -
Talonavicular arthrodesis
Cuneonavicular arthrodesis
4 bones arthrodesis -
Radio-scapho lunar arthrodesis
2, 3 and 4 bones carpal arthrodesis -
Radio-scapho lunar arthrodesis
K310
Xpode4
K320
Xpode Carpal
Opening wedge tibial osteotomy
K500
Elix
Complex intra and extra articular fractures
of the distal radius -
Distal radius osteotomy
K700
DRV Plate
Shortening osteotomy -
Correction osteotomy - Akin osteotomy -
Metatarso-phalangeal arthrodesis
AMF000
Memotech
26

Think simple
®

305, Allées de Craponne
13300 Salon de Provence
CATALOGUE France PRODUITS
Tél. : 33 (0)4 90 44 60 60
Fax : 33 (0)4 90 44 60 61
www.biotech-international.com
think Simple