5 Tapping 220 clamp type 88 and 89 for water PN 16 <strong>Co</strong>nstruction: Type 88, Tapping clamp with internal pipe thread acc. to DIN 2999. Type 89, Tapping clamp with flange outlet DN 40 or DN 50. Both types are suitable for mounting on pipes with diameters from DN 80 up to DN 300 and useable for cast iron – as well as for steel – and asbestos cement pipes. The clamping bands (Stainless steel, plastic coated) are packed as a unit together with all necessary accessories and are allocated to the types and diameters of the pipes. Materials: Tapping clamp made of ductile cast iron acc. to DIN EN 1563. <strong>Co</strong>ating: inside and outside hot melt epoxy powder coating, optional inside enamelled. Fig. 88 Fig. 89 Field of application (water up to 40 °C; gas acc. to G 260/1) Water – test-pressure bar 21 DN Fig. 88 Weight in kg ≈ output ø d 1" / 1 80 — 300 1 / 4 " 1 1 Dimensions and weights / 2 " / 2" 3 3 Available as blank clamp, too. Max. operating pressure bar in case of operating temperature up to 40 °C 16 Fig. 89 Weight in kg ≈ output DN 1 DN 40 DN 50 6,3 7,0 Clamping bands for tapping clamps type 88 and 89 and for tapping valves “TOP“ and “TOPsi“ <strong>Co</strong>nstruction: Flat clamping band for the dimensions DN 80 – 300 and useable for cast iron-, cast iron cement coated as well as for steel- or asbestos cement pipes PN 12,5. The clamping bands ( stainless steel, plastics coated ) are packed as a unit together with all necessary accessories and are allocated to the types and diameters of the pipes. Material: Flat band with welded on threaded bolts made of stainless steel 1.4301, passivated and powder coated. Washers made of stainless steel 1.4104. Nuts made of stainless steel 1.4571 with slide coating. Thread protectors made of plastics. Saddle gaskets made of high quality elastomer. a = Clamping band for cast iron pipes (bitumen / PE coated) b = Clamping band for cast iron pipes (cement coated) c = Clamping band for steel pipes acc. to DIN 2448, series 1 d = Clamping band for steel pipes acc. to DIN 2448, series 3 e = Clamping band for ac pipes PN 12,5 acc. to DIN 19 800 Dimensions ( Dimensions in mm ) DN 80 100 125 150 200 250 300 a pipe- outside-ø 98 118 144 170 222 274 326 b pipe- outside-ø 106 126 154 180 232 286 338 c pipe- outside-ø 88,9 114,3 139,7 168,3 219,1 273,0 323,9 d pipe- outside-ø — 108 — 159 — — — e pipe- outside-ø row a row a row b row b row b row b 352 5221
5 Flap 222 valves Design features: Fig. 125 with flange connection PN 10 / 16, acc. to DIN EN 1092-2 Material: Body and flap: ductile cast iron acc. to DIN EN 1563, inside and outside epoxy-resin coated; flap shaft: brass; flap sealing: elastomer. Dimensions and weights DN 50 65 80 100 125 150 200 250 300 350 400 Face-to-face dimension L ≈ 210 210 210 250 250 280 300 350 360 390 390 Weight in kg ≈ 5,5 7,6 9,4 13,0 16,0 22,0 35,0 60,0 70,0 92,0 117,0 Fig. 125 with flange connection PN 10 / 16 5223