Tsurumi Dewatering Pumps Introduction (Aug 2011). - Aussie Pumps

More documents

Recommendations

Info

LB & LSC SERIES General dewatering pumps (single phase) LB SERIES - COMPACT & PORTABLE Powerful pumps built with durable materials in an easy-to-handle design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. FEATURES Urethane, Semi Vortex Impeller and Wear Plates for maximum durability and maintaining pump performance. 2 pole induction motor with class E insulation Optional Accessories Float Switch for automatic operation. 3” NPT coupling option Model LB-480A Automatic submersibles with sensitive electrodes detect water to start pump operation even when foreign materials are present. ADDITIONAL FEATURES No control panel or float switches required. Environmentally friendly, reducing electrical costs and operational noise. Technical Features of EL-1 Relay Unit Internal timer eliminates frequent on/off operation in rough water to extend motor life. ven Relay sensor completely moulded in resin and covered by rubber case for protection against rough handling. p 4 LB-1500 LB-1500 Bore Model Motor Rated Head Capacity Starting Dry Max. Solid Max. Water Cable (mm) Output Current max. max. Method Weight Handling Depth Length kW A m l/min kg mm m m 50 LB-480 0.48 2.9 11 225 capacitor 10.4 6 20 10 50 LB-800 0.75 5 15 310 capacitor 13.2 6 20 10 50 LB-1500 1.5 15.4 17.5 420 capacitor 33.0 6 50 10 Automatic (electrode sensor with timed delay) 50 LB-480A 0.48 2.9 11 225 capacitor 11.0 6 20 10 50 LB-800A 0.75 5 15 310 capacitor 13.8 6 20 10 LCS SERIES - PUDDLE SUCKER Original residue dewatering pump, able to pump down to 1mm. Complete drainage of flooded basements, cellars, car parks and flat surfaces where a sump is not available. FEATURES Prime pump through discharge outlet for start up at any water level. Internal check valve holds prime and prohibits back flow through pump when stopped. Urethane, semi vortex impeller and wear plates for maximum durability and maintaining pump performance. Australian Pump Industries <strong>Aug</strong>ust 2012 (02) 8865 3500 100 200 Capacity lpm 300 100 300 Capacity lpm 500 Bore Model Motor Rated Phase Head Capacity Starting Dry Max. Solid Max. Water Cable (mm) Output Current max. max. Method Weight Handling Depth Length kW A m l/min kg mm m m 25 LSC1.4S 0.48 6.2 single 11 170 capacitor 12 6 20 10
HS SERIES - SAND SUCKER The HS series has a shaft mounted agitator that enables the pumping of sand and compressible solids in suspension. Pump selection software & detailed specs available. FEATURES Built-in shaft mounted agitator suspends solids. Urethane semi vortex impeller for maximum durability and pump performance. Double inside mechanical seal with silicon carbide faces provides longest operational life. Oil lifter provides lubrication of the seal faces even at low oil levels. V-ring seal design protects mechanical seal from abrasive particles. Optional Accessories Vertical discharge coupling. HSZ AUTOMATIC SAND PUMP Automatic sand pumps have a float switch to control operation. This can lower running costs and result in less wear on the pump. FEATURES Built-in shaft mounted agitator suspends solids. Urethane semi vortex impeller for maxmum durability and pump performance. 2 pole induction motor with class E insulation Optical Accessories Vertical discharge coupling. Bore Model Motor Rated Phase Head Capacity Starting Dry Max. Solid Max. Water Cable (mm) Output Current max. max. Method Weight Handling Depth Length kW A m l/min kg m m m m 50 HS2.4S 0.4 2.6 single 12.2 207 capacitor 11.3 7 20 10 50 HS2.75S 0.75 4.6 single 18 300 capacitor 18.2 7 20 10 Automatic 50 HSZ2.4S 0.4 2.6 single 12.2 207 capacitor 11.3 7 20 10 50 HSZ2.75S 0.75 4.6 single 18 300 capacitor 18.2 7 20 10 NK SERIES - HIGH PERFORMANCE Heavy duty, high head pumps capable of handling abrasive materials with minimal wear. FEATURES Semi vortex impeller & synthetic rubber wear plates for maximum durability & maintaining pump performance. 2 pole induction motor with class B insulation Optional Accessories TS-303 Float Switch for automatic operation. Sand kit to suspend solids and prevent clogging. Bore Model Motor Rated Phase Head Capacity Starting Dry Max. Solid Max. Water Cable (mm) Output Current max. max. Method Weight Handling Depth Length kW A m l/min kg mm m m 50 NK2-22 2.2 13.5 single 24 525 capacitor 32 6 50 8 p 5 Agitator suspends sand and mud, allowing for sediment removal from sumps or basins 100 200 Capacity lpm 300 100 300 Capacity lpm 500 Australian Pump Industries <strong>Aug</strong>ust 2012 (02) 8865 3500 HS & NK SERIES
Page 1 and 2: TSURUMI PUMP DEWATERING PUMPS from
Page 3: Design Features NOT ALL PUMPS ARE M
Page 7 and 8: KRS SERIES - HEAVY DUTY HIGH FLOW B
Page 9 and 10: Deep well mine pumps Pump selection
Page 11 and 12: NKZ SLURRY SERIES - HEAVY DUTY SAND

Tsurumi Dewatering Pumps Introduction (Aug 2011). - Aussie Pumps

Create successful ePaper yourself

Delete template?

Save as template?