Compressors / compressed air - Aircraft
Compressors / compressed air - Aircraft
Compressors / compressed air - Aircraft
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Component parts for <strong>compressed</strong> <strong>air</strong> units<br />
Vessel batteries - For an additional <strong>air</strong> supply of up to 400 litres without TÜV acceptance<br />
Maximum vessel content at minimum footprint -<br />
the space-saving solution<br />
· Vessel batteries are available as set of 2 or 4<br />
batteries<br />
· All vessel batteries are also available as 13<br />
bar type with 75 l vessels<br />
· By switching the other <strong>compressed</strong> <strong>air</strong> vessels<br />
the volume is being increased, so that it is<br />
possible to build up a higher <strong>air</strong> supply<br />
· Thus, an increased <strong>air</strong> requirement may be<br />
covered for a short time<br />
Air supply of a compressor<br />
with a vessel of 100 l can be<br />
extended to up to 500 litres<br />
by using <strong>Aircraft</strong> vessel<br />
batteries<br />
TÜV-free<br />
10 bars<br />
· If necessary, individual <strong>compressed</strong> <strong>air</strong><br />
vessels can be separated by ball valves,<br />
so that the vessel volumes are reduced<br />
accordingly the the pressure is being built up<br />
more rapidly<br />
· TÜV free - Type tested by Accredited<br />
Inspection bodies for 10 bar- and 13 bar types<br />
the TÜV inspection is omitted<br />
· Any installation and recurring tests<br />
can this way also be performed by an<br />
authorized person<br />
AiRPROFi 853/100/10 H<br />
· connected via optional flexible armoured hose line<br />
on a twin vessel battery Kb 2x100/10<br />
· It is possible to displace vessel batteries easily by means of a lift truck<br />
13 bars<br />
10 bars<br />
New<br />
13 bars<br />
Type Kb 2x100/10 Kb 2x75/13 Kb 4x100/10 Kb 4x75/13<br />
Item No 250 2102 250 2104 250 2132 250 2134<br />
€ plus VAT 1'050.00 1'180.00 1'730.00 1'380.00<br />
Technical data<br />
Number of vessels 2 2 4 4<br />
Reservoir capacity 2 x 100 l 2 x 75 l 4 x 100 l 4 x 75 l<br />
Maximum pressure 10 bars 13 bars 10 bars 13 bars<br />
Dimensions<br />
(LxWxH) in mm 420x900x1510 420x900x1480 900x900x1510 900x900x1480<br />
optional equipment Item No € plus VAT<br />
Connection kit bEKoMAT/ÖwAMAT<br />
Scope of delivery:<br />
Öwamat 10, Bekomat 31, all parts for connection to the<br />
corresponding vessel batteries, incl. assembly at the factory<br />
Connection kit BEKOMAT/ÖWAMAT to KB2x100 / KB2x75 250 4150 609.00<br />
Connection kit BEKOMAT/ÖWAMAT to KB4x100 / KB4x75 250 4151 659.00<br />
· Please find important notes and our complete range of products for<br />
condensate processing in the chapter Processing from Seite 102<br />
98<br />
· Only applicable in Germany<br />
· Vessel inside and outside hot-dip galvanized,<br />
15-year guarantee on the vessel against rustthrough<br />
· It is possible to displace all vessel batteries<br />
easily by means of a lift truck<br />
Kb 4x100/10<br />
Figure shows<br />
standard scope of delivery<br />
Fig. below: Kb 4x100/10<br />
Figure shows accessories: (1) Condensate<br />
preparator Öwamat 10 with inlet on optional<br />
console, (2) condensate drain Bekomat 31 with<br />
(3) inlets and (4) fine filter with (5) flexible line<br />
1<br />
2 3<br />
4<br />
5<br />
Built according to CE directives