Compressors / compressed air - Aircraft

AIRTRonIC control
The intelligent operating, controlling and
monitoring system
The guarantor for an optimum, cost-efficient
operation as well as the necessary safety in
servicing and maintaining the system:
· Intelligent operating and control system
· Freely programmable
· Technically matured and proven a thousand
times
· To enter, monitor and visualize the
parameters and functions important for the
operation
· It is possible to connect the system
to superordinated compressed air
management systems
A-RS TOP Fig. with
optional sound insulation
hood and control AIRTRONIC
A-RSDK ToP/ A-RSDK
New
The function keys in detail
The lCD display
First row
· On the left: the current compressor
temperature
· On the right: the current network pressure,
measured with a pressure sensor
Second row indicating depending on the
operating status:
· Operational messages
· Failure-, warning- and
maintenance messages
· Menu areas
Operational messages
· Ready-to-start: Control operational,
but not yet actuated.
· AWAL delay: Delay in restarting after
voltage breakdown.
· Delay in restarting: Delay
in restarting after switch-off.
· Dryer delay: Delay in start-up
after dryer start.
· Start as required: The compressor
waits for pressure requirement.
· Starting phase motor: The compressor
is currently starting up.
· Load run: The motor runs and the load
valve is opened.
· Coast time: The motor is running and
there is no pressure requirement.
· Smooth coasting: The motor runs and
the compressor is not actuated.
· No start enable: A digital input
is programmed on starting release
and opened.
The lED displays
LED green:
Compressor blanked out or interrupted (OFF),
Compressor cammed-in but motor does
not run (flashing), compressor cammed-in
and motor is running (ON).
LED red:
No maintenance, warning or
Malfunction (OFF), warning or maintenance
and no malfunction (flashing), malfunction (ON)
The keys
Switching on the compressor
Switching off the compressor
Menu: preceding point
Change: increase parameter
Function: activating the information level
Menu: subsequent point
Change: reduce parameter
Function: activating the information level
Menu: activate change
Change: take on parameter change
Expiry: after 2 seconds entry
of access codes
Menu: quit menu
Change: discard parameter changes
Function: acknowledge malfunctions or
warnings/maintenance
The compact and complete compressed air
station saves space and extensive assembly
on site.
Built according to CE directives 91
New
SCREw-TyPE CoMPRESSoRS