Compressors / compressed air - Aircraft

Series A-QUADRO
New
Series A-QUADRo - Screw-type compressors with V-belt drive for continuous operation
and 100% load - designed for highest operational safety.
· V-belt drives for elastic start-up
· Small overall dimensions and light-weighted
type thus easy transportation and spacesaving
installation
· Incl. electronic control
EasyTRONIC micro II equipped with pressure
sensor operation as standard, thus avoiding
motor overload, reduction of wear and longer
durability
· High coolant effect and low noise level by
thermostatic controlled radial fan
· Temperature monitoring by a sensor which is
directly installed on the compressor block
Fig. Type A-QUADRO
· Fig. shows open front cover
· Easy to maintain thus optimum accessibility
and easy disassembly and assembly of all
important components
· Incl. operating hour counter, which collects the
load and lag time, thus secured compliance
with the maintenance intervals - display of
the maintenance requirement via automatic
message
· The ergonomically favourably attached
operating field with digital display, the
Emergency-Stop switch and the functional
diagram allow rapid overview and easy access
to all important functions
· With rotating direction control for the motor
as standard, thus avoiding eventual damages
when commissioning or after relocation
Series A-QUADRo 11 and 15 - belt driven screw-type compressors with star delta switch
Fig. Type A-QUADRO-D
on a 500 l compressed air
reservoir
Type Max.- Effective Motor power noise Dimensions Connection Vessel weight Item no € plus VAT
pressure delivery quantity development in mm content
bars m³ /min kw HP in db(A)* l x w x H l kg
A-QUADro 11-8 8 1.65 11 15 69 800 x 650 x 980 3/4” - 200
A-QUADro 11-10 10 1.5 11 15 69 800 x 650 x 980 3/4” - 200
A-QUADro 11-13 13 1.15 11 15 69 800 x 650 x 980 3/4” - 200
A-QUADro 15-10 10 1.85 15 20 70 800 x 650 x 980 3/4” - 210
A-QUADro 15-13 13 1.55 15 20 70 800 x 650 x 980 3/4” - 210
Series A-QUADRo-D 11 and 15 - belt driven screw-type compressors on compressed air vessel with star delta switch
Type Max.- Effective Motor power noise Dimensions Connection Vessel weight Item no € plus VAT
pressure delivery quantity development in mm content
bars m³ /min kw HP in db(A)* l x w x H l kg
A-QUADro-D 11-8 8 1.65 11 15 69 1980 x 650 x 1630 3/4” 500 332
A-QUADro-D 11-10 10 1.5 11 15 69 1980 x 650 x 1630 3/4” 500 332
A-QUADro-D 11-13 13 1.15 11 15 69 1980 x 650 x 1630 3/4” 500 332
A-QUADro-D 15-10 10 1.85 15 20 70 1980 x 650 x 1630 3/4” 500 350
A-QUADro-D 15-13 13 1.55 15 20 70 1980 x 650 x 1630 3/4” 500 350
*Sound pressure level at a distance of 1 m according to DIN 45635 T 13
· Easy to maintain thus optimum accessibility
and easy disassembly and assembly of all
components to be maintained
· Optimum operating temperatures due to
thermostatic controlled fan, optimum cooling
air guidance and largely dimensioned heat
exchanger, thus longer durability, minor
variations of the oil temperature as with
thermostatic control
· Incl. after-cooler as standard, thus less
expenditure for drying and filtering of the
generated compressed air
Serially equipped with
EasyTRONiC micro ii control:
The ergonomically favourably
attached operating field with
digital display and Emergency-
Stop switch allow rapid overview
and easy access to all important
functions
208 9130
208 9131
208 9132
208 9133
208 9134
208 9135
208 9136
208 9137
208 9138
208 9139
! Description
EasyTRONIC II
Control
on page 75
4'690.00
4'690.00
4'690.00
4'820.00
4'820.00
5'890.00
5'890.00
6'090.00
6'020.00
6'190.00
84 Built according to CE directives