01.02.2013 Views

Compressors / compressed air - Aircraft

Compressors / compressed air - Aircraft

Compressors / compressed air - Aircraft

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Fixed- 13-15 bars<br />

Airprofi DUo - Universally applicable <strong>compressed</strong> <strong>air</strong> station of 2 x 75 l<br />

Compressed <strong>air</strong> vessel ready-mounted on a safety palette,<br />

Space saving and can be transported - TÜV-free<br />

· Two-stage compressing two-cylinder high-performance<br />

unit with a cylinder block made of grey cast iron<br />

· The low speed provides a smooth and<br />

low-vibration running and a long service life<br />

· Largely-dimensioned fanwheel for an optimum cooling<br />

· The quality electric motors are protected from overheating<br />

and overloading via a protective motor switch<br />

· Including phase inverter for easy<br />

manual inversion of the sense of rotation<br />

· Intercooler and after-cooler reduce the condensation<br />

formation<br />

· Maintenance block including two manometers for the<br />

vessel pressure and working pressure and high quality<br />

ConDoR pressure switch<br />

· Fully automatic ON/OFF operation<br />

· Completely ready for connection<br />

with all fittings<br />

Increased flexibility<br />

· By switching the second<br />

<strong>compressed</strong> <strong>air</strong> vessel the volume<br />

is being doubled, by what a higher<br />

<strong>air</strong> supply may be built up<br />

· Thus, an increased <strong>air</strong> requirement<br />

may be covered<br />

for a short time<br />

· At example for chisel or grit<br />

blasting, the second <strong>compressed</strong><br />

<strong>air</strong> vessel may be separated from<br />

the <strong>air</strong> intake by what the vessel<br />

volume is halved and thus the<br />

pressure is built up<br />

duo 703/2x75/10 KK<br />

Similar figure<br />

Type Duo 703/2x75/13<br />

Item No 202 3185<br />

€ plus VAT 2'570.00<br />

Type Duo 703/2x75/13 K<br />

Item No 202 3186<br />

€ plus VAT 4'140.00<br />

Type Duo 703/2x75/13 KK<br />

Item No 202 3187<br />

€ plus VAT 5'260.00<br />

Technical data<br />

Compressor system * HoS<br />

Maximum volume flow 500 l<br />

Filling capacity 400 l<br />

Maximum pressure 13 bars<br />

Reservoir capacity 2 x 75 l<br />

Cylinder/stages 2/2<br />

Speed 850 1/min.<br />

Motor power 4 kW/400 V<br />

Weight 230 kg<br />

Dimensions (LxWxH) in mm 1200 x 900 x 1250<br />

Sound pressure LPA *** 79 dB(A)<br />

Air outlet on the vessel 3/4’’<br />

Air outlet on the refrigerant dryer 1/2’’<br />

*Description compressor systems refer to Page 18 ** TÜV free only applicable in Germany<br />

***Sound pressure level at a distance of 1 m according to DIN 45635 T 13<br />

58<br />

New<br />

· You have 13 bars operating pressure available in your shop<br />

without the otherwise required TÜV testing for compressors<br />

with a shutdown pressure of more than 10 bars.<br />

· It can be performed by an<br />

authorised person on the DUO 703/2x75/13.<br />

**<br />

Scope of delivery K:<br />

· With refrigeration dryer AD 35<br />

Scope of delivery KK:<br />

· Fine filter CLEARPOINT ®<br />

· Refrigeration dryer AD 35<br />

· Condensate drain<br />

BEKOMAT ®<br />

· Condensate preparator<br />

ÖWAMAT ® 10<br />

· “K” type standard with<br />

refrigeration dryer with the<br />

integrated level-controlled<br />

condensate drain BEKOMAT ®<br />

· Pressure dew point at 3°C,<br />

environmental temperature<br />

25°C, atmospherical melting<br />

point at -22°C<br />

· The “KK” type<br />

is additionally equipped<br />

with a pre-filter to separate<br />

condensate and solid<br />

soiling with particles of up<br />

to 25 microns.<br />

· Compressed <strong>air</strong> quality<br />

according to ISO 8573-1<br />

· As pre-filter installed<br />

upstream of the refrigerant<br />

dryer<br />

· Liquid- or oil-recognizing<br />

condensate drain BEKOMAT ®<br />

31 on the vessel<br />

· Due to the level control, the<br />

BEKOMAT ® 31 is working<br />

without unnecessary loss of<br />

<strong>compressed</strong> <strong>air</strong><br />

· Condensate preparator<br />

ÖWAMAT ® 10 with largely<br />

dimensioned exhaust <strong>air</strong>/<br />

coalescence filter and largely<br />

dimensioned pre- or postabsorber<br />

Built according to CE directives

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!