Compressors / compressed air - Aircraft

Fixed compressed air station - 10 bars
Airprofi DUo - Universally applicable compressed air station of 2 x 100 l
Compressed air vessel ready-mounted on a safety palette,
space-saving and transportable
· Two-stage compressing two-cylinder high-performance unit
with a cylinder block made of grey cast iron
· The low speed provides a smooth and
low-vibration running and a long service life
· Largely-dimensioned fanwheel for an optimum cooling
· The quality electric motors are protected from overheating
and overloading via a protective motor switch
· Including phase inverter for easy
manual inversion of the sense of rotation
· Intercooler and after-cooler reduce the condensation
formation
· Maintenance block including two manometers for the
vessel pressure and working pressure and high quality
ConDoR pressure switch
· Vessel inside and outside hot-dip galvanized, 15-year
guarantee on the vessel against rust-through
· Fully automatic ON/OFF operation
· Completely ready for connection with all fittings
duo 853/2x100/10
Type Duo 853/2x100/10
Item No 202 3085
€ plus VAT 2'235.00
Type Duo 853/2x100/10 K
Item No 202 3086
€ plus VAT 3'800.00
Type Duo 853/2x100/10 KK
Item No 202 3087
€ plus VAT 4'930.00
Technical data
Compressor system * HoS
Maximum volume flow 850 l
Filling capacity 680 l
Maximum pressure 10 bars
Vessel capacity 2 x 100 l
Cylinder/stages 2/2
Speed 1240 1/min.
Motor power 5.5 kW/400 V
Weight 235 kg
Dimensions (LxWxH) in mm 1200 x 900 x 1250
Sound pressure L PA *** 83 dB(A)
Air outlet on the vessel 3/4’’
Air outlet on the refrigerant dryer 1/2’’
* Description compressor systems refer to Page 18
** TÜV free only applicable in Germany
***Sound pressure level at a distance of 1 m according to DIN 45635 T 13
Increased flexibility
· By switching the second
compressed air vessel the volume
is being doubled, by what a higher
air supply may be built up
· Thus, an increased air requirement
may be covered for a short time
· At example for chisel or grit
blasting, the second compressed
air vessel may be separated from
the air intake by what the vessel
volume is halved and thus the
pressure is built up
duo 853/2x100/10 KK
Scope of delivery K:
· With refrigeration dryer AD 35
Scope of delivery KK:
· Fine filter CLEARPOINT ®
· Refrigeration dryer AD 35
· Condensate drain
BEKOMAT ®
· Condensate preparator
ÖWAMAT ® 10
· “K” type standard with
refrigeration dryer with the
integrated level-controlled
condensate drain BEKOMAT ®
· Pressure dew point at 3°C,
environmental temperature
25°C, atmospherical melting
point at -22°C
· The “KK” type
is additionally equipped
with a pre-filter to separate
condensate and solid soiling
with particles of up to 25
microns.
· Compressed air quality
according to ISO 8573-1
· As pre-filter installed upstream
of the refrigerant dryer
· Liquid- or oil-recognizing
condensate drain BEKOMAT ® 31 on
the vessel
· Due to the level control, the
BEKOMAT ® 31 is working without
unnecessary loss of compressed air
· Condensate preparator
ÖWAMAT ® 10 with largely
dimensioned exhaust air/
coalescence filter and largely
dimensioned pre- or postabsorber
· you will find important
notes about the condensate
preparation
in the chapter compressed air
preparation
Built according to CE directives 51
**
PISTon CoMPRESSoRS