Compressors / compressed air - Aircraft

Accessories
· Liquid- or oil-recognizing
condensate drain BEKOMAT ®
31 on the vessel
· Due to the level control
no unnecessary loss of
compressed air
· Condensate preparator
ÖWAMAT ® 10 with largely
dimensioned exhaust air/
coalescence filter and pre- or
post-absorber
Technical data Refrigerant dryer AD 35 Refrigerant dryer AD 51
Capacity at 35°C 580 l / 35 m 3 /h 830 l / 50 m 3 /h
Pressure max. 16 bars 16 bars
Power 50 Hz 200 W / 230 V 270 W / 230 V
Connection IT 1/2” 1/2”
Dimensions (LxWxH) 370x515x475 mm 370x515x475 mm
Pressure dew point 3 °C 3 °C
Environmental temperature 20°C 20°C
Compressed air inlet
temperature 35°C 35°C
Operating pressure 7 bars 7 bars
· The fine filter CLEARPOINT ® for
the discharge of condensate and
solid soiling with particles up to 25
microns.
· Compressed air quality according to
ISO 8573-1
· As pre-filter installed upstream of
the refrigerant dryer
· You will find important
notes about the condensate
preparation
in the chapter compressed air
preparation
Scope of delivery VK:
· Safety palette
· Refrigeration dryer AD 35
· For type 853/1003
Refrigerant dryer AD 51
Scope of delivery VKK:
· Safety palette
· Refrigeration dryer AD 35
· For type 853/1003
Refrigerant dryer AD 51
· Fine filter CLEARPOINT ®
· Condensate preparator
ÖWAMAT ® 10
· Condensate drain
BEKOMAT ®
AiRPROFi 853/270 VKK
Maximum equipment
on narrowest space
With the KK type your complete
compressed air generation and
preparation is housed on about
1sqm. Delivery including safety
palette
New
· “K” type standard with refrigeration
dryer with the integrated levelcontrolled
condensate drain BEKOMAT ®
· Pressure dew point at 3°C,
environmental temperature 25°C,
atmospherical melting point at -22°C
Illustrated fine filter
only for "KK" type
as standard
· The two-stage compressing
two-cylinder highperformance
unit with a
cylinder block made of grey
cast iron for a smooth running
and a long service life
· The largely-dimensioned
fanwheel provide an optimum
cooling
· The low speed provides
highly efficient air conveying
capacity, reduces wear
· The intercooler and aftercooler
with large-surface
cooking lamellaes provide a
low vessel inlet temperature
and thus reduce the
condensate formation
· Flexible armoured hose-
line with heat protection for a
long service life as a vibration
fracture is not possible
Accessories Item No € plus VAT
1 Oscillation element with one-sided
Thread 100x38 mm / M10 250 5640 12.50
1 Oscillation element with double-sided
Thread 70x38 mm / 2xM10 (for SSP) 250 5650 13.90
Safety stand pallet SSP 203 0103 199.00
upright stationary 1200 x 800 x 140 mm
Automatic star-delta starting switch
With operating hour counter
(Regional from 5.5 kW prescribed) 250 6010 595.00
Built according to CE directives 47
PISTon CoMPRESSoRS