Compressors / compressed air - Aircraft

Maximum equipment and best quality at cost-efficient prices!
AiRPROFi 503/50
Built according to CE directives
HOS
10
11
12
13
14
15
16
17
18
· Powerful and economic drive
· The toothed drive belt eases the start-up,
improves the running smoothness as well
as the power transmission and reduces
the power consumption by up to 30%
· The large fan wheel and a cooling air baffle on
the cylinder provide for
optimum cooling of the compressor
· A stable belt grid protection made of metal
provides for optimum protection of the
component parts and for high safety of the
operator
· Corrosion free valve plates for improved
heat dissipation and long durability of a
compressor
· The two-cylinder high-performance unit made of
grey cast and the low speed guarantees
a maximum smooth running and a long service life
· HOS compressor guarantees optimum lubrication
for long durability and high reliability
· Equipped with high quality suction filter
· The aftercooler with large cooling lamellaes
provide for low vessel inlet temperature and thus
for less humidity in the compressed air which is
gentle to the compressed air tools
· The flexible armoured hose line with heat
protection for long durability
since no vibration fracture is possible
· The start up relief valve guarantees a smooth
and depressurized start up
· Including handy transportation handle on the
vessel
· AIRPROFI compressors guarantee
permanent rust protection
· AIRCRAFT ® is the first manufacturer
who equip the compressors of the series
AIRPROFI serially with interior and exterior
hot-dip galvanized vessels
· For the series AIRPROFI we grant a guaranty of
15 years against rust through on the vessel
· The stable steering chassis with parking brake
in connection with the large puncture proof
wheels made of PU foam allow comfortable
transportation since it is not necessary to lift
the compressor when driving.
Does not require TÜV approval
· The mobile AIRPROFI compressors are type tested
by an approved inspection agency. Thus the
testing by the ZÜS before the first commissioning
at the place of installation is being omitted. (A
separate TÜV acceptance is required for the type
AIRPROFI 703/100/15)
· Any recurring tests to proof the safety of the vessel
according to the operating safety regulation can
also be performed by an authorized person.
· Only applicable in Germany
39
PISTon CoMPRESSoRS