Compressors / compressed air - Aircraft

Series AIRSTAR
The mobile AIRCRAFT ® compressors of the series AIRSTAR -
Massive quality for craftsmen and demanding do-it-yourselfer.
Cooling system
· Largely dimensioned fan wheel
and cool air baffle on the cylinder
provide for optimum cooling of
the compressor
· Stable protection of belt fence
made of metal for optimum
protection
Operation
· It is possible to fix the working
pressure on the filter pressure
controller infinitely variable and
take out filtered compressed air
· Two manometers indicate the vessel
and working pressure
· Serially equipped
with quality quick
coupling and high
quality CONDOR
pressure switch
Connection
· Power connection cable including plug
· 400 volt types are equipped with
manually operable phase inverter as
standard
Compressed air vessel
· High quality powder coating
guarantees long durability of the
vessel
· 10-year guarantee on the
vessel against rust through
Built according to CE directives
Powerful and economic drive
· The tooth drive belt facilitates
starting up and improves
running smoothness as well as
power transmission and reduces
the power consumption by up to
30% (from Airstar 401/50 on)
Transport handle
· With ergonomic brackets
and rubber handle for
comfortable transportation
Electric motor
· The quality electrical motor with high
starting torque is protected against
overheating and overload by a motor
protection switch
· Start-up capacitor and start-up relief
valve secure smooth start-up of 230
volts types
· 400 volts types equipped with phase
inverter
for easy manual inversion
of the sense of rotation
AiRSTAR 503/50
Chassis
· Stable steerable chassis
including parking brake inline
with the large puncture proof
wheels made of PU foam allows
comfortable transportation since
it is not necessary to lift the
compressor when driving.
High-performance power engine HOS
· The two-cylinder high-performance
unit made of grey cast iron in
connection with the low number
of revolutions allow a maximum of
smooth running and service life
· The aftercooler with large surface
cooling lamellaes provides a low
vessel inlet temperature
Corrosion free
Valve plates for
improved heat
dissipation and
long durability of the
Compressors
Handy transport
handle on the vessel
from Airstar 401/50 on
** Does not require TÜV approval
· AIRSTAR compressors are type tested
by an approved inspection agency.
Thus the testing by the ZÜS before the
first commissioning at the place of
installation is being omitted.
· Any recurring tests to proof the safety
of the vessel according to the operating
safety regulation can also be performed
by an authorized person.
35
PISTon CoMPRESSoRS