Compressors / compressed air - Aircraft

The correct dimensioning of a compressed air piping is very important: In case of a loss of pressure from 6 bar to 5 bar you will loose about 25%
of the tool capacity. In order to compensate this loss pressure, a driving energy of more than 10% is necessary.
Length m
l/min.
25 40 60 80 100 150 200 250 300 400 500 600 800 1000
750 20 20 20 22 22 25 28 28 28 30 30 30 40 40
1200 20 20 20 22 22 25 28 28 28 30 30 30 40 40
1500 22 22 25 28 28 30 30 30 40 40 40 40 40 50
2000 25 28 30 30 40 40 40 40 40 50 50 50 50 50
3000 30 30 40 40 40 40 50 50 50 50 50 60 60 60
4800 40 40 40 50 50 50 50 60 60 60 80 80 80 80
7200 40 50 50 50 60 60 60 80 80 80 80 80 80 80
10800 50 60 60 60 80 80 80 80 80 80 80 *represented in grey = not included
in the range of products. Attention: For circular piping half the volume flow and the total length; the values are only theoretical and have to be
exactly calculated for the individual piping and cut according to the situation on site.
Scope of delivery of the compressor Dimensioning of the compressed air piping
Technical data for aluminium profile piping systems
Field of application: compressed air, vacuum, argon, carbon dioxide, hydrogen, benzine, alcohol.
Designations Units Profile El 40, 50, 60, 80
Material ENAW 6060
Chemical composition SI 0.3-0.6% Mg 0.35-0.6% 7c 0.1-0.3%
Other designations DIN: ALMgSi 0.5/F22/ENAW
Heat treatment Tempering T66
Surface treatment (if required) Chemical oxidation - colour natural
Specific weight - Density Kg/dm3 270
Electrical conductivity % IACS 53
Heat conductivity W/m, K 200
Specific heat J/Kg.K 96
Expansion coefficient mm/m.°C 0.024
Brinnel hardness HB 70.4
Tensile breaking load N/mm 2 215
Elongation breaking load N/mm 2 160
Elastic module K/mm 2 6700
Extension A 50% % 6
Extension screw material Steel of the class 8.8
Melting clearance °C 600-650
Min./max. operating temperature °C -40 / +120
Test pressure kg/cm 2 24
Operating pressure 10 mbars - 15 bars
Material of the O-ring seals Standard NBR 70
Operating temperature of the O-ring
Seals °C -20 / +100
Loss of pressure 0.1 bar at 7 bar working pressure.
Attention: For circular piping, half the volume flow and the total length
Assembly of the plates
The brilliant construction
principle eases the
assembly. The new
piping system can
be easily and rapidly
mounted.
Built according to CE directives
The clamping
technology which is
taken out for a patent
and which is far
beyond other fixtures
allows this. This way,
you are saving lots of
time and lots of money.
The core piece of the
innovative piping
system is a lightweighted
rectangular
tube made of extruded
aluminium.
It is corrosion-proof and very good flow.
Aluminium affiliates all advantages of
conventional materials such as steel, plastic
or copper. At the same time it avoids their
disadvantages such as rough surface, sagging
tubes, corrosion and similar..
Aluminium profile compressed air piping system
AlS
- For the crafts enterprise or for the small industry
company with an air consumption of max. 2000 l/
min.
- Perfect complement for the simplyAir system for
the stub and output tubes. Also here you can
profit of the decisive advantages of our intelligent
aluminium piping system
- Extremely simple and rapid assembly
- Aluminium is light-weighted, corrosion-proof and
of very good flow
- The air removal is possible at any required
position without interrupting the operating
procedure
- Complete system in different sizes, from A to Z
everything is perfectly matching one another
- Rapid modular laying
- Laying of the tubes by simply plugging in the
tubes
- Rapid assembly and disassembly without any
special tools
- Large choice of connection and accessory parts
allows an optimum adaptation of the piping
network to the existing shop
- Tubes and connections in different dimensions,
complete with plates, angles or as a T-connection,
points the basis
Just put
on the plate,
tighten it with an
Allen key - ready!
127
Distribution