Compressors / compressed air - Aircraft
Compressors / compressed air - Aircraft
Compressors / compressed air - Aircraft
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Compressed <strong>air</strong> line systems - aluminium profile Ø 40 - 80 mm<br />
Aluminium profile-<br />
Compressed <strong>air</strong> lines 40 / 50 / 60 / 80 mm<br />
The innovative, future-oriented piping system for <strong>compressed</strong> <strong>air</strong> and liquids.<br />
· The aluminium tube combines all advantages of the conventional<br />
materials such as steel, plastic or copper,<br />
but avoids their disadvantages.<br />
· Due to the consequent enhancement you can<br />
save 50% of the time compared to the systems used up to now.<br />
· The target of the development was to save on at<br />
least half of the screwed connections for the single components.<br />
Only the outer profile shape remained.<br />
· The diameters 40 mm, 50 mm and 60 mm are available,<br />
up to 80 mm are available upon request.<br />
Spot drilling device for rapid and low noise<br />
installation of connections.<br />
your advantages<br />
Quality<br />
The aluminium <strong>compressed</strong> <strong>air</strong> piping system is<br />
setting new bench marks in the distribution of<br />
<strong>compressed</strong> <strong>air</strong>.<br />
Development<br />
During the development we have attached lots<br />
of importance on the feedback of the market.<br />
Therefore, lots of people will recognize their<br />
proposals in the new system.<br />
Patented clamping technology<br />
- It is possible to drill under pressure<br />
- Low noise due to silencing<br />
- Compatible to any systems used worldwide<br />
- All four sides can be used<br />
- Rapid and safe installation of connections<br />
- Easy, rapid and cost-efficient mounting<br />
- Air removal at any required position<br />
- Different fasteners for wall or ceiling assembly<br />
are available<br />
- Also subsequent changes are possible at any<br />
time<br />
- Absolute <strong>air</strong> tightness and reliability<br />
Required tools for assembly:<br />
- Allen key<br />
- Deburring knife<br />
- Countersink<br />
- Saw (manual saw or electrical cross-cut saw)<br />
- Grease (recommended Klüber Microlube GL<br />
261)<br />
- Drill or cordless screw driver<br />
- Spot drilling device (if you want to perform<br />
spot drilling under pressure at working<br />
conditions)<br />
Compressed <strong>air</strong> accessories<br />
- you will find from Page 135<br />
Flexibility<br />
The <strong>air</strong> removal can be performed at any required<br />
position, even under pressure. Therefore, any<br />
changes can be easily performed within shortest<br />
time.<br />
System<br />
Where it is a question of systems around<br />
<strong>compressed</strong> <strong>air</strong>, complete solutions one-stop are<br />
your guarantee for safety. We will support you in<br />
realizing your demands starting from the planning<br />
up to the commissioning.<br />
There are different dimensions with different<br />
internal diameters as well as a large range of<br />
connection pieces and accessory parts available.<br />
Ready-mounted <strong>compressed</strong> <strong>air</strong> connection with<br />
safety coupling and spiral coiled tube.<br />
Assembly<br />
The handling is uncomplicated. For the assembly<br />
you only need an Allen key.<br />
Power<br />
Complete system - from A to Z everything is<br />
matching one another in different sizes.<br />
Result<br />
Maximum <strong>compressed</strong> <strong>air</strong> quality, high-flexibility<br />
and time saving due to easy assembly are making<br />
this system becoming a system for the future.<br />
126 Built according to CE directives
Change language