using the bootstrap loader
using the bootstrap loader
using the bootstrap loader
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
OVERVIEW OF BOOTSTRAP LOADER OPERATIONS<br />
You can change <strong>the</strong> location of <strong>the</strong> remote third stage by <strong>using</strong> <strong>the</strong> BR3.CSD SUBMIT file<br />
to generate your own version. Chapter 4 describes <strong>the</strong> BR3.CSD SUBMIT file.<br />
1.5 CONFIGURING YOUR OWN BOOTSTRAP LOADER<br />
If you intend to create your own version of <strong>the</strong> Bootstrap Loader, you use <strong>the</strong> Bootstrap<br />
Loader configuration and generation files supplied by Intel. These files are located in <strong>the</strong><br />
directory /BSL in both iRMX I and iRMX II systems. This is a change from previous<br />
releases of iRMX 86 where <strong>the</strong>y were located in /RMX86/BOOT and from previous<br />
releases of iRMX II where <strong>the</strong>y were in /RMX286/BOOT. Information about configuring<br />
<strong>the</strong> first and third stages is available in Chapters 3 and 4, and information on writing new<br />
device drivers is available in Chapters 5 and 6.<br />
Bootstrap Loader 1-11
Change language