The SWIFT BAT Software Guide Version 6.3 30 ... - HEASARC - Nasa

E.9. SWIFT BAT SOFTWARE BUILD 11: 2004 NOV 19 205
exposure maps if requested. This change makes batclean operate in
a similar way to batfftimage and batcelldetect which can operate
on multiple input images.
* BUG FIXES. One prevented the code from correctly reading detector
enable/disable maps in table (as opposed to image) format. The
other was crashing the code when half or more of the array was
disabled. This was found during commissioning when processing
data with only half the array turned on.
batdph2pha:
* No interface changes.
* Minor modification to code to copy GTI extension to
output.
batdrmgen
* RESPFILE keyword is now written to the PHA file.
* Change in calculation of transmission of photons through lead tiles:
now more accurate above 88 keV.
* BUG FIX: when highest EBOUNDS edge is lower than the highest
incident photon energy.
* Other bug fixes, fix memory leaks.
bateconvert
* INTERFACE CHANGE: new parameter fltpulserfile is required for
processing. This "flight" pulser DAC to energy conversion is the
on-board table.
* Code cleanups
baterebin
* Now resubmitted!
* Corrects energy scale with different parameters for individual detectors
* Will do more than one row in a DPH
* Besides quadratic correction, now corrects energy scale using best current
voltage to energy relation table
* Added ebins parameter, which allows user to select output energy binning
* INTERFACE CHANGE: new parameter fltpulserfile is required for
processing. This "flight" pulser DAC to energy conversion is the
on-board table.
* Added the outdatatype parameter, which allows the user to select the
data type in the output DPH
* Removed the calmode parameter, it should always be quadratic
* Renamed the wf parameter to wholecount
batfftimage
* Bug fixes
* Metadata like TSTART, EXPOSURE, etc. are now transferred properly
to the output, especially if multiple images are processed.
bathotpix
* Metadata like TSTART, EXPOSURE, etc. are now transferred properly