The SWIFT BAT Software Guide Version 6.3 30 ... - HEASARC - Nasa

D.16. BATOCCULTGTI 173
(unocculted = “YES”) [boolean ]
Enter “YES” to find the unocculted intervals. In the unlikely event that you are interested
in the occulted intervals, enter “NO”.
(tempregionfile = “INDEF”) [string ]
Name of a temporary file used when performing the field of view (FOV) check. A region file
is written out containing the shape of the BAT field of view in tangent plane coordinates at
the desired partial coding threshold. A value of NONE indicates that no file is required. A
value of INDEF indicates that a scratch file should automatically be created and deleted as
needed for this purpose. If an explicit file name is given, the user is responsible for deleting
the file.
(tempexprfile = “NONE”) [string ]
Name of a temporary file used for making intermediate coordinate transformation calculations
for the field of view (FOV) check. A value of NONE indicates that no file is required. A value
of INDEF indicates that a scratch file should automatically be created and deleted as needed
for this purpose. If an explicit file name is given, the user is responsible for deleting the file.
(pcodethresh = 0.50) [real ]
Partial coding threshold, as a fraction of unity. If the FOV check is enabled, then times are
considered good only if the target is partially coded at the level of pcodethresh or higher.
(calcfile = “NONE”) [string ]
Name of file to be used for intermediate calculations in the FOV check. Various columns,
containing coordinate transformation and BAT tangent plane coordinates, are appended to
the SAO file. A value of “NONE” indicates that an intermediate file should not be created.
(att type = “SAO”) [string ]
Set to “SAO” if the input file is a prefilter (SAO) file, or “ATT” if the input file is a Swift
attitude file.
(prefr = 0.5) [real ]
Pre-Time Interval factor passed to the ‘maketime’ task.
(postfr = 0.5) [real ]
Post-Time Interval factor passed to the ‘maketime’ task.
(clobber = NO) [boolean ]
If the output file already exists, then setting “clobber = yes” will cause it to be overwritten.
(chatter = 2) [integer, 0 - 5 ]
Controls the amount of informative text written to standard output. Setting chatter = 1
produces a basic summary of the task actions; chatter = 2 (default) additionally prints a
summary of input parameters; chatter = 5 prints debugging information.
(history = YES) [boolean ]
If history = YES, then a set of HISTORY keywords will be written to the header of the
specified HDU in the output file to record the value of all the task parameters that were used
to produce the output file.