The SWIFT BAT Software Guide Version 6.3 30 ... - HEASARC - Nasa

D.8. BATFFTIMAGE 141
(time = 0) [real ]
Command line override for the image time. This MET time is used to interpolate the attitude
file. By default the image midpoint time is used (= (TSTART+TSTOP)/2).
(maskwtswgain = 0.03) [real ]
Mask weight technique software gain correction factor. When corrections=maskwt, the image
is divided by (1+maskwtswgain). This is correction is software algorithm dependent and not
intended to be changed by the user.
(copyall = YES) [boolean ]
If set, then batfftimage will copy any extra HDUs to the output file. If not set, then only
the sky images are written. Extra extensions are any HDUs that come after the image
extension(s).
(clobber = NO) [boolean ]
If the output file already exists, then setting “clobber = yes” will cause it to be overwritten.
(chatter = 2) [integer, 0 - 5 ]
Controls the amount of informative text written to standard output. Setting chatter = 1
produces a basic summary of the task actions; chatter = 2 (default) additionally prints a
summary of input parameters; chatter = 5 prints debugging information.
(history = YES) [boolean ]
If history = YES, then a set of HISTORY keywords will be written to the header of the
specified HDU in the output file to record the value of all the task parameters that were used
to produce the output file.
D.8.5 EXAMPLES
1. Reconstructs the sky image from the detector plane image focalplane.img. The aperture map,
aperture.img, is in the current directory.
batfftimage focalplane.img skyimage.img
2. Make a partial coding map for the given detector configuration given in detmask.img. The
output file is the image pcodemap.img. If the detmask parameter were not given, then a default
one would be used, which assumed that all detectors were enabled.
batfftimage NONE pcodemap.img detmask=detmask.img pcodemap=YES
D.8.6 REFERENCES
Fast Fourier Transform routines by T. Ooura, used with permission. http://momonga.t.utokyo.ac.jp/∼ooura/
D.8.7 SEE ALSO
batbkgclean, batcelldetect