The SWIFT BAT Software Guide Version 6.3 30 ... - HEASARC - Nasa

Recommendations

Info

D.5. BATDRMGEN 129 (history = YES) [boolean ] If history = YES, then a set of HISTORY keywords will be written to the header of the specified HDU in the output file to record the value of all the task parameters that were used to produce the output file. D.5.6 EXAMPLES batdrmgen sw00050100004bsvo01f0g01f0.pha sw00050100004bsvo01f0g01f0.rsp NONE D.5.7 SEE ALSO batbinevt D.5.8 LAST MODIFIED Apr 2007
130 APPENDIX D. BAT SOFTWARE TOOL REFERENCE D.6 BATECONVERT D.6.1 NAME bateconvert - read in an event file and apply energy conversions. D.6.2 USAGE bateconvert infile calfile residfile pulserfile [outfile] [calmode] [zeroit] D.6.3 DESCRIPTION This task reads in an event file and one to three calibration files containing gains and offsets in a BAT Detector Plane array. For each event it calculates the energy in keV from the ADU value (PHA), gain and offset. The tool fills the PI and ENERGY columns in the event FITS file. PI is the same as energy, but expressed in units of 0.1 keV. If the event file does not have a PI column, then such a column is added to the file. The default is to fill in or create the PI column in the input file, but if the optional “outfile” argument is given, a new file with the PI column filled is created. D.6.4 PARAMETERS infile [filename ] Input file name. There is no need to include the extension name of the HDU since bateconvert only operates on an HDU with name “EVENTS.” Unless an outfile name is specified, bateconvert will automatically fill in the PI column in the infile and/or create a PI column if none exists. calfile [filename ] Name of the calibration file. This is a required parameter. This file is expected to contain the gain and offset derived in flight. This file is used for both LINEAR and QUADRATIC energy conversion. The file must exist and must include a “BAT MAP” extension with “GAIN” and “OFFSET,” columns containing calibration parameters in the proper format. If zeroit==YES then the calfile need not exist and calfile can be set to NONE (or left off the command line). residfile [filename ] Name of the file containing the residuals between a quadratic pulser gain fitting and a linear fitting. This is a required parameter. This file is typically derived from ground processing. This file is used for all but the LINEAR energy conversion. The file must exist and must include a “BAT MAP” extension with “GAIN2”, “GAIN,” “OFFSET” columns containing calibration parameters in the proper format and had the appropriate value of the GAINMETH keyword. If calmodes CUBIC, DIRECTCUBIC, or FIXEDDAC are used, the file must also have a GAIN3 column. If DIRECTCUBIC or FIXEDDAC are used, the file must have
Page 1 and 2:
The SWIFT BAT Software Guide Versio
Page 3 and 4:
ii CONTENTS 4.4 How Sky Fluxes are
Page 5 and 6:
iv CONTENTS 6 BAT Analysis Issues 5
Page 7 and 8:
vi CONTENTS D.1.6 SEE ALSO . . . .
Page 9 and 10:
viii CONTENTS D.10.2 USAGE . . . .
Page 11 and 12:
x CONTENTS D.18.5 EXAMPLES . . . .
Page 13 and 14:
xii CONTENTS
Page 15 and 16:
2 CHAPTER 1. INTRODUCTION • Appen
Page 17 and 18:
4 CHAPTER 2. BAT INSTRUMENT Figure
Page 19 and 20:
6 CHAPTER 2. BAT INSTRUMENT Figure
Page 21 and 22:
8 CHAPTER 2. BAT INSTRUMENT The The
Page 23 and 24:
10 CHAPTER 2. BAT INSTRUMENT
Page 25 and 26:
12 CHAPTER 3. BAT OPERATING MODES A
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
20 CHAPTER 4. INTRODUCTION TO BAT A
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
28 CHAPTER 5. BAT ANALYSIS PROCEDUR
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
56 CHAPTER 6. BAT ANALYSIS ISSUES T
Page 71 and 72:
58 CHAPTER 6. BAT ANALYSIS ISSUES w
Page 73 and 74:
60 CHAPTER 6. BAT ANALYSIS ISSUES T
Page 75 and 76:
62 CHAPTER 6. BAT ANALYSIS ISSUES 2
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
70 APPENDIX A. BAT DATA FORMATS Nam
Page 85 and 86:
72 APPENDIX A. BAT DATA FORMATS A.5
Page 87 and 88:
74 APPENDIX A. BAT DATA FORMATS A.5
Page 89 and 90:
76 APPENDIX A. BAT DATA FORMATS Nam
Page 91 and 92: 78 APPENDIX A. BAT DATA FORMATS wil
Page 93 and 94: 80 APPENDIX A. BAT DATA FORMATS BBi
Page 95 and 96: 82 APPENDIX A. BAT DATA FORMATS Arr
Page 97 and 98: 84 APPENDIX A. BAT DATA FORMATS 535
Page 99 and 100: 86 APPENDIX B. BAT FITS KEYWORDS
Page 101 and 102: 88 APPENDIX B. BAT FITS KEYWORDS
Page 103 and 104: 90 APPENDIX C. BAT ACRONYM AND TERM
Page 105 and 106: 92 APPENDIX C. BAT ACRONYM AND TERM
Page 107 and 108: 94 APPENDIX D. BAT SOFTWARE TOOL RE
Page 113 and 114: 100 APPENDIX D. BAT SOFTWARE TOOL R
Page 141: 128 APPENDIX D. BAT SOFTWARE TOOL R
Page 193 and 194:
180 APPENDIX D. BAT SOFTWARE TOOL R
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
190 APPENDIX E. BAT SOFTWARE REVISI
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237:
show all

The SWIFT BAT Software Guide Version 6.3 30 ... - HEASARC - Nasa

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?