UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.2 Maintenance instructions<br />
Ventilation of the control<br />
(see page 5-4)<br />
Check the air Every 40 operating hours.<br />
filter<br />
1. Switch off the control and pull the power supply plug.<br />
2. Open the cover of the ventilation.<br />
3. Check the air filter on dirt.<br />
4. If the air filter is dirty:<br />
- Remove the air filter and rinse it with warm water (max. 40 °C).<br />
or<br />
- Remove the air filter and suck it with an industrial vacuum cleaner.<br />
or<br />
- Remove air filter and beat it/shake it out.<br />
or<br />
- If the air filter is oily or fatty: dispose of it.<br />
5. Insert the cleaned or new air filter.<br />
6. Close the cover of the ventilation.<br />
Change the air Every 1000 operating hours; more frequent if the surroundings are very soiled.<br />
filter<br />
1. Switch off the control and pull the power supply plug.<br />
2. Open the cover of the ventilation.<br />
3. Remove the air filter of the ventilation.<br />
4. Insert new air filter.<br />
5. Close the cover of the ventilation.<br />
B_PM_<strong>UMC</strong><strong>112</strong>_en05.doc<br />
ÖSTLING Markiersysteme GmbH Maintenance 5-5