UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
• Current: motor current in [mA].<br />
• Boost: increase of the motor current in [mA] during ramping.<br />
• MaxPos: maximum position in [mm] the marking head can reach. Accords<br />
to the marking field.<br />
Example: 100 mm in X-direction, 50 mm in Y-direction for marking head<br />
5/10.<br />
• mm/step: with coining heads: feed in [mm] after each drop of the coining<br />
tool.<br />
• Ramptime: time in [ms] during which the motor current is increased.<br />
• MaxV: travel speed of the marking head in X- or Y-direction in [mm/s] during<br />
deadhead.<br />
• HomeV: speed of the marking head in X- or Y-direction in [mm/s] during<br />
homing.<br />
• Overtravel: position of the initiator. An initiator is an inductive proximity<br />
switch. Distance of the initiator from home in [mm] in X- or Y-direction.<br />
• Limit Switch: displays if limit switch is a normally closed contact or a normally<br />
open contact.<br />
B_PM_<strong>UMC</strong><strong>112</strong>_en04.doc<br />
ÖSTLING Markiersysteme GmbH Operation 4-37