UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.2 Switching on and off the control<br />
Switching on the control<br />
Safe operation not warranted!<br />
� Control must be switched off for at least 20 s before switching on.<br />
1. Open the front door.<br />
2. Switch on the MAIN SWITCH.<br />
Control boots, axes of the marking head reference: the slide of the marking<br />
head moves in X- and Y-direction until the X- and Y-initiator respectively<br />
actuates. Then it continues to move in X- and Y-direction by the value of<br />
"Overtravel" (see page 4-36). The reached position is defined as basing point of<br />
the marking head. This basing point is the origin of the marking field.<br />
After successful homing the main menu appears:<br />
Main menu Fig. 10561en<br />
B_PM_<strong>UMC</strong><strong>112</strong>_en04.doc<br />
4-6 Operation ÖSTLING Markiersysteme GmbH