UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.7 Socket START<br />
2.8 Profibus PB<br />
The socket START for the connection of a foot switch has 9 pins. The marking<br />
can be started by foot switch.<br />
Pin Signal Name Remark<br />
1 GND GND 24 V DC<br />
2 reserved do not use<br />
3 reserved do not use<br />
4 reserved do not use<br />
5 reserved do not use<br />
6 +24 V DC +24 V DC internal voltage<br />
7 E1.0 foot switch start max. +25 V DC<br />
8 reserved do not use<br />
9 reserved do not use<br />
Tab. 10<br />
The socket profibus PB is optional. As default, the station address 11 is set.<br />
The address of the profibus ca be changed via Pinware and Software, if<br />
necessary also via the bus itself.<br />
� To include the I/O module into the profibus PB: install the delivered GSD file<br />
on the master.<br />
The inputs and outputs correspond to the inputs and outputs of the connections<br />
BU2 und BU3 (option):<br />
B_PM_<strong>UMC</strong><strong>112</strong>_en07.doc<br />
7-10 Connector pin lists ÖSTLING Markiersysteme GmbH
Change language