UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Start marking<br />
The marking process start can also be done via the serial port instead of<br />
through the hardware start input. It should be noted that this can only be done if<br />
the control is „Ready to mark“. The marking process cannot be stopped via the<br />
serial port.<br />
To start the marking, the following data must be sent:<br />
1. Byte 2. Byte 3. Byte 4. Byte 5. Byte<br />
HEX 01h 50h 53h 1Ah 04h<br />
DEC 01 80 83 26 04<br />
ASCII SOH 'P' 'S' SUB EOT<br />
Start of<br />
header<br />
Mark Start Substitute End of<br />
transfer<br />
After error-free reception of the data the control sends the following:<br />
1. Byte 2. Byte 3. Byte 4. Byte 5. Byte<br />
HEX 01h 50h 53h 06h 04h<br />
DEC 01 80 83 06 04<br />
ASCII SOH 'P' 'S' ACK EOT<br />
Start of<br />
header<br />
Mark Start Acknowledge End of<br />
transfer<br />
Tab. 3<br />
Tab. 4<br />
B_PM_<strong>UMC</strong><strong>112</strong>_en06.doc<br />
ÖSTLING Markiersysteme GmbH Communication 6-5
Change language