UMC 112 - Trend Product Marking Systems Australia

3 Operational safety
The marking system is built according to the latest state-of-the-art technology,
and reliability in service.
From this marking system, however, dangers can proceed if it is used by untrained
personnel inappropriately, or to not intended use. This can result in:
• Dangers for the safety of the operator.
• Impairment of the marking system and further real values of the user.
• Impairment of the efficient work of the marking system.
3.1 Intended use of the marking system
The UMC 112 coining or engraving unit is a marking system for marking products
through coining.
Intended use means in addition:
• The setting up conditions prescribed by the manufacturer must be kept and
maintenance work must be accomplished.
• The installation of the marking system and its operation must stand in
conformity with the valid national regulations of the user country. For their
observance the user is responsible.
Impermissible is:
• Arbitrary changing or changes of the marking system by the user or operator.
• Each function, which could impair safety.
We assume no liability from not intended use!
Each use going beyond that is not considered as intended. For material
damage and personal injuries resulting from this, the manufacturer is not
responsible; the risk for this carries alone to the user.
B_PM_UMC112_en01.doc
ÖSTLING Markiersysteme GmbH Safety 1-3