UMC 112 - Trend Product Marking Systems Australia
UMC 112 - Trend Product Marking Systems Australia UMC 112 - Trend Product Marking Systems Australia
3.2 Maintenance instruction Pneumatic maintenance unit Note 2 different maintenance units are used at the PinMark marking units. Use Type of maintenance unit FESTO type All marking tools Filter control valve with pressure reducer Marking tools WE 1 and/or WE 4 with hardened steel piston housing Filter control valve with pressure reducer and oiler Festo LFR 1/8 D-Mini Festo FRC 1/8 D-Mini, consisting of: • LFR 1/8 D-Mini. • LOE 1/8 D-Mini. Tab. 4 For maintenance of the pneumatic parts please observe the operation manual of FESTO. B_PM_UMC112_en05.doc 5-14 Maintenance ÖSTLING Markiersysteme GmbH
Set the oiler If necessary. 1. Do not switch off the control! 2. To switch on the needle in manual operation: select System > Manual Control. Mask "Manual Control" Fig. 10553en 3. Select Needle to move the marking tool up and down once. 4. Adjust the oiler to approx. 1 drop per minute, see operation manual of FESTO. B_PM_UMC112_en05.doc ÖSTLING Markiersysteme GmbH Maintenance 5-15
- Page 53 and 54: 3.4 Saving masks 1. Create the mask
- Page 55 and 56: 4. Enter file name you wish to give
- Page 57 and 58: 5.2 Starting the marking 1. Select
- Page 59 and 60: 6.2 Importing data Texts from files
- Page 61 and 62: 7 System control 7.1 Reading out di
- Page 63 and 64: • I/O Status: status of the input
- Page 65 and 66: 5. To edit the I/O program: - Selec
- Page 67 and 68: 7.4 Setting marking head parameters
- Page 69 and 70: • Current: motor current in [mA].
- Page 71 and 72: 7.6 Selecting the marking tool 1. S
- Page 73 and 74: 7.7 Controlling the inputs and outp
- Page 75 and 76: Selecting network settings 1. Selec
- Page 77 and 78: • Number of marking: default how
- Page 79 and 80: Displaying and sorting files for fi
- Page 81 and 82: 7.9 Setting date and time 1. Select
- Page 83 and 84: 7.10 Saving data on USB stick Furth
- Page 85 and 86: 8.2 Further fonts This font is a pr
- Page 87 and 88: Font 'lcom.chr' Fig. 10282 Font 'oc
- Page 89 and 90: Font 'trip.chr' Fig. 10291 Font 'ts
- Page 91 and 92: Chapter 5 Maintenance 1 General Gui
- Page 93 and 94: 1.2 Lubricants For single-shift ope
- Page 95 and 96: 2.2 Maintenance instructions Ventil
- Page 97 and 98: Toothed belts of the axes (Coining
- Page 99 and 100: Slides of the axes (Coining unit) C
- Page 101 and 102: Adjust the nuts 6. Insert new batte
- Page 103: 3 Pneumatic parts 3.1 Maintenance o
- Page 107 and 108: Chapter 6 Communication 1 Communica
- Page 109 and 110: Parameter General remarks 3. To act
- Page 111 and 112: Start marking The marking process s
- Page 113 and 114: Load text With this function, text
- Page 115 and 116: 1.2 PLC operation (option) Loading
- Page 117 and 118: 2 Inputs and outputs with special f
- Page 119 and 120: Chapter 7 Connector pin lists 1 Mar
- Page 121 and 122: 1.2 Stepping motors Colour coding C
- Page 123 and 124: 2.1 Socket BU1 to marking head The
- Page 125 and 126: 2.3 Socket BU3 The socket BU3 for e
- Page 127 and 128: 2.5 Socket BU4 2.6 Socket BU5 The s
- Page 129 and 130: In- /output Name Remark E1.0 foot s
- Page 131 and 132: 4 Serial port RS232 Serial communic
- Page 133 and 134: Terminal strip on slide Cable Termi
- Page 135 and 136: Chapter 8 Index B_PM_UMC112_en08.do
- Page 137 and 138: Mode Edit mode.....................
- Page 139 and 140: Chapter 9 Drawings, parts lists B_P
- Page 141 and 142: Chapter 10 EU conformity explanatio
- Page 143: - Machines 98/37/EG - Electromagnet
- Page 146 and 147: B_PM_UMC112_en11.doc 11-2 Request f
- Page 149: ÖSTLING Markiersysteme GmbH ÖSTLI
3.2 Maintenance instruction<br />
Pneumatic maintenance unit<br />
Note<br />
2 different maintenance units are used at the PinMark marking units.<br />
Use Type of maintenance unit FESTO type<br />
All marking tools Filter control valve with<br />
pressure reducer<br />
<strong>Marking</strong> tools WE 1 and/or<br />
WE 4 with hardened steel<br />
piston housing<br />
Filter control valve with<br />
pressure reducer and oiler<br />
Festo LFR 1/8 D-Mini<br />
Festo FRC 1/8 D-Mini,<br />
consisting of:<br />
• LFR 1/8 D-Mini.<br />
• LOE 1/8 D-Mini.<br />
Tab. 4<br />
For maintenance of the pneumatic parts please observe the operation manual<br />
of FESTO.<br />
B_PM_<strong>UMC</strong><strong>112</strong>_en05.doc<br />
5-14 Maintenance ÖSTLING Markiersysteme GmbH