The Army Maintenance Management System (TAMMS) Users Manual
The Army Maintenance Management System (TAMMS) Users Manual The Army Maintenance Management System (TAMMS) Users Manual
Figure 3–22. Sample DD Form 314 used for system B1 requirements Figure 3–23. Sample DD Form 314 used for equipment end items and component requirements 76 DA PAM 750–8 22 August 2005
Legend for Figure 3–24; completion instructions follow. EQUIPMENT DATA. ADMIN NUM, EQUIP MODEL, EQUIP NOUN, EQUIP NSN, EQUIP SERIAL NUM, and REGISTRATION NUM is retrieved from the equipment data file. No entries from the operator/crew chief are needed in these areas. The operator/crew chief must ensure that data contained in these areas are correct prior to pulling PMCS. If any fields are not current, notify the ULLS operator so he/she can update the data fields through the ULLS Menu process. For more information about these data fields, refer to the ULLS End User Manual. TYPE INSPECTION. Operator/crew chief requests the ULLS operator to print an Equipment Maintenance and Inspection Worksheet with the type inspection to be performed. See ULLS End User Manual or chapter 3 of this pamphlet for an explanation of these symbols. Figure 3–24. Sample DA Form 5988–E used for operator/crew PMCS DA PAM 750–8 22 August 2005 77
- Page 39 and 40: REGISTRATION NO./SERIAL NO. The dis
- Page 41 and 42: Notes: 1 More than one component on
- Page 43 and 44: 1. The person in charge of the equi
- Page 45 and 46: 1. The dispatcher prints the name o
- Page 47 and 48: Legend for Figure 2-13; completion
- Page 49 and 50: j. This chapter provides procedures
- Page 51 and 52: (1) Purpose. DA Form 5410 is used t
- Page 53 and 54: pamphlet. Explain those symbols or
- Page 55 and 56: mileage/kilometers or hours in a 12
- Page 57 and 58: (1) Units using ULLS-G use the comp
- Page 59 and 60: conditions for inoperative equipmen
- Page 61 and 62: ack to the organization as a receip
- Page 63 and 64: (1) Copy one is kept by the owning
- Page 65 and 66: Table 3-3. List of SNT reportable i
- Page 67 and 68: (k) Certification or decertificatio
- Page 69 and 70: 5. SERIAL NUMBER OF DEADLINED ITEM.
- Page 71 and 72: Legend for Figure 3-4; completion i
- Page 73 and 74: equired and AOE procedures are used
- Page 75 and 76: ORG WON/DOC. The organizational wor
- Page 77 and 78: Legend for Figure 3-9; completion i
- Page 79 and 80: Notes: 1 A system DD 314 is needed
- Page 81 and 82: Figure 3-13. Sample DD Form 314 sub
- Page 83 and 84: Legend for Figure 3-15; completion
- Page 85 and 86: Legend for Figure 3-17; completion
- Page 87 and 88: Figure 3-19. Sample DD Form 314 com
- Page 89: Figure 3-21. Sample DD Form 314 use
- Page 93 and 94: Notes: 1 Administrative/bumper numb
- Page 95 and 96: Notes: 1 Administrative number/bump
- Page 97 and 98: INITIAL WHEN CORRECTED. The person
- Page 99 and 100: a. Enter the noun abbreviation and
- Page 101 and 102: . The operator/crew chief must ensu
- Page 103 and 104: 1. ORGANIZATION. Enter the name of
- Page 105 and 106: 2. NOMENCLATURE AND MODEL. a. Enter
- Page 107 and 108: Legend for Figure 3-32; Completion
- Page 109 and 110: Notes: 1 Status code, date, and tim
- Page 111 and 112: Notes: 1 DA Form 3999-4 has four bl
- Page 113 and 114: PHONE. Displays the phone number of
- Page 115 and 116: SECTION I—CUSTOMER DATA. Blocks 1
- Page 117 and 118: Legend for Figure 3-38; completion
- Page 119 and 120: 38d. TIME. Enter the military time
- Page 121 and 122: Legend for Figure 3-40; Completion
- Page 123 and 124: 36d. TIME. Enter the military time
- Page 125 and 126: SECTION IV—TASK REQUIREMENTS DATA
- Page 127 and 128: 3c. PHONE NO. Enter the phone numbe
- Page 129 and 130: Notes: 1 When used as a DA Form 240
- Page 131 and 132: 5. If the delay is for a shop backu
- Page 133 and 134: Legend for Figure 3-47; completion
- Page 135 and 136: UIC SUPPORT. Support unit UIC. UNIT
- Page 137 and 138: UIC’s SELECTED FOR THIS REPORT. E
- Page 139 and 140: g. Contamination is a problem that
Figure 3–22. Sample DD Form 314 used for system B1 requirements<br />
Figure 3–23. Sample DD Form 314 used for equipment end items and component requirements<br />
76 DA PAM 750–8 22 August 2005