The Army Maintenance Management System (TAMMS) Users Manual

Legend for Figure 3–18;
Completion instructions follow. Enter the last two digits of the calendar year in the shaded box at the upper left or lower left of the card.
REGISTRATION NUMBER. Enter See Remarks.
ADMINISTRATION NO. Enter the number of items being recorded in the remarks block. (For example, Pistol #1-#20).
NOMENCLATURE.
1. Enter the noun abbreviation in this block.
2. Enter the words, “Equip End Item” below the noun.
3. Place the ECC and the LIN under the word, Equip End Item. ECCs are available in table B–18. LINs are in the FED LOG. Use the
exact nomenclature format listed in the FED LOG
MODEL. Enter the model number in ink.
ASSIGNED TO. Enter the name of the unit or organization owning the equipment in pencil.
REMARKS. When using the form to show services on more than one nonreportable item, serial numbers or administration numbers are
listed in ink in the Remarks block on the front side of the form. At the end of the year, the backside of the form is used. The serial or
administration number do not require recopying on the reverse side of DD Form 314. Print See Remarks block Front Side in the
Remarks block. For ATC equipment, PMCS time shows total time required for performance of PMCS on all like items supported by the
form.
DATE RECEIVED. Leave blank or use as needed locally.
RECEIVED FROM. Leave blank or use as needed locally.
DISPOSITION. Leave blank or use as needed locally.
DATE BLOCKS. Indicate services scheduled with pencil entries and services completed with ink pen entries.
Figure 3–18. Sample DD Form 314 used to record more than one serial number
72 DA PAM 750–8 22 August 2005