The Army Maintenance Management System (TAMMS) Users Manual

Legend for Figure 3–15;
completion instructions follow. Use either the blocks at the top or the bottom of the card. Enter the last two digits of the calendar year in
the shaded box at the upper left or lower left of the card.
REGISTRATION NUMBER. Enter the registration number in ink, if the equipment has one assigned, or the serial number.
ADMINISTRATION NO. Enter the equipment’s administration number (bumper or locally assigned number). If the equipment does not
have an assigned administration number (bumper or locally assigned number), pencil, none assigned in this block.
NOMENCLATURE. Ink entry.
1. Enter the noun abbreviation of the system.
2. Enter the word system (B1) below the noun.
3. Enter the ECCs and LIN of the system below the word system (B2) or system (B1). ECCs appear in table B18. LINs are in the FED
LOG. Use the exact nomenclature format listed in AR 700–138.
MODEL. Enter the model number of the primary item of the system; for example, M1009. Use the exact model format listed in AR
700–138. Ink entry.
ASSIGNED TO. Enter the name of the unit or organization owning the equipment in pencil.
REMARKS. List each Equip End Item in the system, if any. The TM identifies what the Equip End Items are. Enter the serial numbers or
other identifying number in pencil beside the Equip End Items.
DATE RECEIVED. Leave blank or use as needed locally.
RECEIVED FROM. Leave blank or use as needed locally.
DISPOSITION. Leave blank or use as needed locally.
DATE BLOCKS. Show day-by-day breakout of NMC time. Mark the days in the date block.
Figure 3–15. Sample DD Form 314 system (B1) (back)
DA PAM 750–8 22 August 2005
69