The Army Maintenance Management System (TAMMS) Users Manual

Notes:
1 Operator and supervisor or leader names are used for two purposes. If the folder is lost or misplaced, the finder has names to track down. Most
important, those names show who is responsible for the equipment, the forms in the folder, and the information on the equipments condition.
2 The back of the card may be used for locally required information. For example, if the command asks for a monthly mileage report, enter the start and
end dates and miles on the card in pencil. Miles traveled are shown on DD Form 1970.
Legend for Figure 2–6;
completion instructions follow.
1. BUMPER NO. Enter the bumper number of the end item or equipment.
2. MODEL. Enter the model number.
3. NOUN. Enter the noun or noun abbreviation.
4. NSN. List the end item NSN.
5. SERIAL NO. List the serial number for the equipment. For equipment managed by registration number, enter the item’s registration
number on the card.
6. AOAP SAMPLE. Enter the date and hours the next AOAP sample is due. Get this information from the equipments DD Form 314 or
AOAP lab printout. When making this entry, only use pencil. This entry is only needed for equipment under AOAP.
7. NEXT SERVICE AT. Enter the date and/or miles, kilometers, or hours when the next scheduled service is due on the equipment.
Get this information from DD Form 314. Pencil entry.
8. NEXT LUBE AT. Enter the date and/or miles, kilometers, or hours when the next scheduled lubrication service is due on the
equipment. Pencil entry. Get this information from DD Form 314.
9. OPERATOR. The operator’s last name and rank go here. Pencil entry. Leave blank if more than one operator is assigned to the
equipment.
10. SUPERVISOR. Enter the last name and rank of the operators leader or supervisor here. Pencil entry.
Figure 2–6. Sample DA Form 5823
DA PAM 750–8 22 August 2005
19