The Army Maintenance Management System (TAMMS) Users Manual

35898–7466. The command that manages the item can be found by looking up the item’s NSN on the Army Master
Data File. The command is identified by the first position of the MATCAT code.
a. a. Request to add equipment includes the following information:
(1) The nomenclature of the item.
(2) The item’s NSN.
(3) Model or identification number.
(4) Line item number.
(5) Item manager (the command that manages the item).
(6) The item’s equipment category code (see table B–18).
(7) Is the item currently in the Army inventory? Give the current and projected densities. (Normally the command
that manages the item provides this information.)
(8) Identify the type of historical records required.
(9) Define the purpose of each form to include—
(a) Data to be collected.
(b) Who uses the data.
(c) How long the data must be retained and why.
(d) A picture of the equipment.
b. Request for DA Form 2408–9 information—
(1) Defines the use and purpose for DA Form 2408–9 data being requested.
(2) Defines the data elements required for summaries/reports that must be made on DA Form 2408–9 data that will
be collected. Describe the required format for the intended summaries/reports.
(3) Identifies the frequency for the intended summaries/reports and the activity that is responsible for using the data.
E–6. Usage reporting
Usage reporting for all combat and selected tactical vehicles has been deleted. Usage for these items is now being
obtained through the AOAP. Tactical vehicles not enrolled in the AOAP are still identified in appendix E as DA Form
2408–9 USAGE reportable and is reported as of 1 November of each year. Units with ULLS-G are required to report
usage to LOGSA monthly through ULLS-G using the AMSS end-of-period report process on all equipment with an X
in the columns labeled “24089 USAGE” or “DD2026 USAGE” in figures E–1 through E–4.
E–7. Figure legend
The legend for these figures is shown below:
a. ECC. Equipment category code.
b. NOUN. Nomenclature.
c. MODEL/LIN. Model—End item model; LIN—Line item number.
d. NSN. National stock number.
e. EIC. End item code (*** indicates not assigned).
f. REG# REQD. Indicates items requiring the assignment of U. S. Army registration numbers.
g. Forms required. These are indicated by an X
248 DA PAM 750–8 22 August 2005