The Army Maintenance Management System (TAMMS) Users Manual

7. RESULTS. Enter the results of the lab analysis: normal, maintenance recommended by the lab, component removed, send in another
sample, and so on. If more room is needed, use the Remarks block (block 9).
8. RESULTS RECEIVED.
a. DATE. Enter the calendar date when posting lab results or other actions.
b. PID. The person making the entries, or their supervisor, signs first initial and last name.
9. REMARKS. Use this block for:
a. Lab results, when more space is needed in column 7.
b. Hour meter changes. With a one-line entry, show the total hours on the item when the hour meter was changed. Also show any hours
on the new meter at that time.
c. Date of the oil change. When starting a new form, unless the first entry is an oil change, enter in pencil the date and hours on the item
when the oil was last changed, and the type of oil.
d. Equipment under warranty. Note warranty-required oil or oil filter change intervals or other needed warranty information.
e. Components under warranty. For components under warranty, print Warranty item and period (miles, hours, month) the warranty
applies. The Warranty Control Office or Logistics Assistance Office can tell if an item is under warranty and for how long. While
equipment is under warranty, change the oil and oil filter as directed by the warranty contract. Do not wait for lab recommended
changes. More frequent oil changes directed by the lab are allowed. Any maintenance action recommended by the lab for warranted
items must be referred to the AOAP monitor and Warranty Control Office.
Figure 5–15. Sample DA Form 2408–20 (back)
Figure 5–16. Sample DD Form 1650 (front)
164 DA PAM 750–8 22 August 2005