The Army Maintenance Management System (TAMMS) Users Manual

Legend for Figure 5–9;
completion instructions follow.
CONTROL NO. Contains a six-character control number. HARD COPY USE ONLY—automated systems are now available and
operational, so this field is no longer needed unless it is used to replace a missing serial number.
1. ORGANIZATION. Enter the name of the reporting unit.
2. LOCATION. Enter the location and zip code of the activity in block 1.
3. UNIT IDENT CODE. Enter the UIC of the activity in block 1. Must not be blank. Do not use the six–position DODAAC.
4. UTILIZATION CODE.
a. Enter the code from table B–6 that applies to the reporting unit and equipment.
b. Enter code V for passenger-carrying and general-purpose vehicles (formerly called admin-use vehicles).
5. VEHICLE USE CODE.
a. For all nontactical wheeled vehicles, as listed in figure E–4, enter the code that applies to the equipments use in this block: A—Army
operated, includes any Army-owned passenger carrying and general purpose vehicles listed in figure E–4, used or operated by Army
personnel (GOGO); B—Contractor operator, includes any Army-owned passenger carrying and general-purpose vehicles listed in figure
E–4 that are furnished to contractors by the Department of the Army for contractor use (GOCO); R—Facilities engineering vehicles,
includes special purpose (commercial) and military design vehicles used by installation real property management activities; X—All other
special purpose vehicles, includes all other special purpose vehicles not covered by code R.
b. Leave blank for other equipment.
6. NOMENCLATURE. Enter the noun of the equipment.
7. MODEL.
a. Enter the model of the item.
b. For passenger-carrying and general purpose vehicles, this block contains the LIN for the item as it is listed in figure E–4, or the FED
LOG.
c. For watercraft, enter the hull design number.
8. NATIONAL STOCK NO. Contains the NSN in this block.
9. SERIAL NO.
a. Enter the complete serial number of the item. Make sure ALL characters and numbers that make up the serial number are listed, to
include any preprinted suffix or prefix.
b. If the item has no serial number, use the control number of the Acceptance or Gain Report (DA Form 2408–9).
c. For vehicle mounted weapon systems, for example, the M113A2 TOW, use the vehicle serial number.
10. REGISTRATION NO.
a. Enter the registration number of the equipment. Do not use the alpha character of “O” or “I”—always use 0 (zero) or 1 (one).
b. If no registration number has been assigned, leave the block blank.
Figure 5–9. Sample DA Form 2408–9 used to record transfer
152 DA PAM 750–8 22 August 2005