The Army Maintenance Management System (TAMMS) Users Manual

5. UIC. List the Owning unit UIC.
6. END ITEM/AIRCRAFT SERIAL NUMBER. List the complete serial number of the item. Make sure ALL alphanumeric characters
making up the serial number are listed, to include any preprinted suffix or prefix.
7. REGISTRATION NUMBER. Enter the registration number if known, otherwise leave blank.
8. MATERIEL CHANGE NUMBER. Enter the Materiel Change Number (MCN) for the Modification work order that is applied to the end
item. Example 9–01–22–1245.
9. MWO NUMBER. Enter the complete MWO number.
10. DATE OF APPLICATION. Enter the date the MWO was applied to the end item. Enter the date as year, month, day. Example:
20021103.
11. ORGANIZATION APPLYING MWO. Enter the organization that applied the MWO. Example: 202nd Maint Company, (WB1ZAT).
Include the name of the organization and UIC. If a contractor applies the MWO, enter the contract number.
12. NAME OR PID. Enter the name or the Personal identification number (PID) of the inspector performing the final quality control
inspection of the MWO application.
13. MANHOURS REQUIRED FOR APPLICATION. Enter the actual man-hours required to apply the MWO. Round to the nearest tenth
of an hour.
14. SOFTWARE VERSION. Enter the software version if the MWO resulted in the replacement of software to the end item. Example:
Version 2.2 or SCP 2.4.
Figure 5–6. Sample DA Form 2408–5
Legend for Figure 5–7;
completion instructions follow.
CONTROL NO. Contains a six-character control number. HARD COPY USE ONLY—automated systems are now available and
operational, so this field is no longer needed unless it is used to replace a missing serial number.
1. ORGANIZATION. Enter the name of the activity or organization accepting the item into the Army inventory.
2. LOCATION. Enter the location and zip code of the activity in block 1.
3. UNIT IDENT CODE. Enter the UIC of the activity in block 1 (cannot be blank). Do not use the six–position DODAAC.
4. UTILIZATION CODE.
a. Enter the code from table B–6 that applies to the reporting unit and equipment.
b. Contains code V for passenger-carrying and general-purpose vehicles (formerly called admin-use vehicles).
5. VEHICLE USE CODE.
Figure 5–7. Sample DA Form 2408–9 used for acceptance and registration
148 DA PAM 750–8 22 August 2005