The Army Maintenance Management System (TAMMS) Users Manual

EQUIPMENT MODEL. Nomenclature and model number of the component; for example, engine air cooled, V-engine configuration,
diesel, superturbocharged, which would be shortened to AVDS; 1790–2A; Xmsn CD 850–6A; and Hydra Sys.
EQUIPMENT SERIAL NUMBER. Serial number of the engine or the components being sampled. On watercraft with twin engines, such
as the LCM8s, identification consists of the serial number of the set and suffix identifying the particular engine. For example, the engines
in serial number 12A7505–LD or LB, and 12A7485 are 12A7485–RD or RB.
END ITEM MODEL/HULL NUMBER. Self-explanatory.
END ITEM SERIAL NUMBER. End Item Serial Number and EIC.
DATE SAMPLE TAKEN. Self-explanatory.
LOCAL TIME SAMPLE TAKEN. Blank.
HOURS/MILES SINCE OVERHAUL. Cumulative number of hours/miles on the component since new or last overhaul.
HOURS/MILES SINCE OIL CHANGE. Number of hours/miles since last oil change on the component. If neither the component nor the
end item has an odometer or hour meter, then the total estimated hours are entered.
REASON FOR SAMPLE. Applicable block is checked. When the reason is Other, such explanation is added under remarks. Initial
sample, loss of engine power, or excessive smoke.
OIL ADDED SINCE LAST SAMPLE. Self-explanatory.
ACTION TAKEN. Blank.
DISCREPANT ITEM. Blank.
HOW MALFUNCTIONED. Blank.
HOW FOUND. Blank.
HOW TAKEN. Self-explanatory.
SAMPLE TEMPERATURE. Self-explanatory.
TYPE OIL. Self-explanatory.
ENGINE POSITION. Blank.
NAME. The individual who took the sample prints rank/grade, first initial and last name.
EMP NO: Users employee number if applicable.
REMARKS/MISC.
1. The odometer reading of the end item in which the component is installed, (Indicate whether the odometer reading represents miles
(MI) or kilometers (KM). Readings are not converted from miles to kilometers or kilometers to miles.)
2. The end item hourmeter reading if the end item does not have an odometer; such as HRS 50.
3. If the end item has both an odometer and hourmeter, only the odometer reading is recorded.
4. Show total equipment usage (the current meter reading plus usage from replaced meter(s)). DD Form 314 (Remarks block) indicates if
the equipment had a meter replaced and the usage of the old meter.
PHONE. Phone number of the point of contact.
SIGNATURE. The person taking the sample signs this block. Note, if the component is not installed in an end item, uninstalled is
entered.
Figure 4–2. DD Form 2026
128 DA PAM 750–8 22 August 2005