POWER TOOLS 2008 - PRO Powertools
POWER TOOLS 2008 - PRO Powertools
POWER TOOLS 2008 - PRO Powertools
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Part of the Atlas Copco Group<br />
<strong>POWER</strong> <strong>TOOLS</strong> <strong>2008</strong>
Designed for a carefree life<br />
No detail is too small for <strong>PRO</strong> industrial tools.<br />
Durable Swedish design, top-notch performance<br />
and unmatched technical support make owning<br />
a <strong>PRO</strong> tool easy. We sweat the small stuff, so you<br />
don’t have to.<br />
<strong>PRO</strong> tools deliver unequalled quality,<br />
performance and durability. As a brand for<br />
industrial users, <strong>PRO</strong> is widely recognized around<br />
the world as the natural choice for professionalgrade<br />
tools.
Designed in Sweden<br />
ASSEMBLY <strong>TOOLS</strong> 5<br />
DRILLS 21<br />
GRINDERS 25<br />
PERCUSSIVE <strong>TOOLS</strong> 36<br />
SPARE PARTS 43<br />
DIMENSIONAL DRAWINGS 45
Safe hand tool operation is a fundamental<br />
tenet of <strong>PRO</strong> tool design. All of our tools have<br />
features that safeguard operators against workrelated<br />
injuries and machine-related hazards.<br />
But the best way to ensure hand tool safety is<br />
to ensure that operators use the recommended<br />
safety practices. That is why each <strong>PRO</strong> tool<br />
4<br />
How to use<br />
our tools safely<br />
Some safety tips<br />
Below are few tips to increase power tool safety and help avoid injury and accidents. These tips,<br />
however, are no substitute for the <strong>PRO</strong> tools safety and instruction manuals.<br />
Conduct a visual inspection of the tool before use<br />
Check the tool, including hoses or fittings, for signs of damage and replace defect parts<br />
if necessary. Check for cracks in the sockets, grinding wheels, chisels, etc., and replace<br />
damaged parts if required.<br />
Check the free speed of the tool<br />
Make sure the measured speed at a pressure of 6.3 bar does not exceed the rated<br />
speed of the tool. Before checking the measured speed, always remove wheels, burrs,<br />
sockets, etc.<br />
Use the right accessories<br />
Always use the accessories recommended in the safety manual. Never use hand<br />
sockets with impact or ratchet wrenches. Never use a grinding wheel, burr, cone wheel,<br />
etc., marked with a speed lower than the speed of the grinder. Always disconnect the<br />
air tool before changing accessories.<br />
Wear safety gear<br />
Always use appropriate safety equipment, such as googles and earplugs. When<br />
required, wear gloves, apron and helmet. When working with materials that produce<br />
airborne particles, be sure to wear a dust mask or similar protective gear and use other<br />
equipment, such as dust extractors, to control exposure to harmful substances.<br />
Before grinding, test the tool<br />
Test run the grinder in a protected area before starting work and after changing the<br />
wheel. Make sure that the space around is free from other people.<br />
Maintain a safe work area<br />
Keep other people at a safe distance away from your workspace while you use the tools.<br />
Beware of hoses on the walking or work surface. Always direct exhaust air away from<br />
yourself and others. Never use an air tool in explosive atmospheres. Stay away from<br />
electric wiring because an air tool is not insulated for contact with electrical power sources.<br />
After work<br />
Always disconnect your air tool after use.<br />
comes with a safety and instruction manual<br />
that operators should read and follow when<br />
using our tools. For a copy of these manuals,<br />
contact your local <strong>PRO</strong> representative.<br />
For more information on safe power tool<br />
operation, please refer to the rules for tool safety<br />
from these two organizations:<br />
www.pro-powertools.com<br />
Safety Code for Portable Air Tools, ANSI B186.1<br />
American National Standards Institute (ANSI)<br />
11 W. 42nd St, 13th floor, New York, NY 10036.<br />
Further occupational health and safety information<br />
can be obtained from the following web sites:<br />
http://www.osha.gov (USA)<br />
http://europe.osha.eu.int (Europe)
Built for speed<br />
Your productivity is our goal. All impact<br />
wrenches, ratchet wrenches and screwdrivers<br />
are built for speed, torque and comfort.<br />
Assembly Tools<br />
When you need reliability, accuracy and repeatability,<br />
you can depend on <strong>PRO</strong> assembly<br />
tools to deliver.<br />
5
6<br />
Need the power to tighten or loosen<br />
a nut with a specified amount of<br />
torque?<br />
<strong>PRO</strong> has just the right impact wrenches<br />
for you. <strong>PRO</strong> Impact Wrenches<br />
are perfect for automotive repair,<br />
heavy equipment maintenance,<br />
product assembly, major construction<br />
3640<br />
2280<br />
1310<br />
665<br />
518<br />
385<br />
275<br />
197<br />
128<br />
81<br />
47<br />
24<br />
9.8<br />
<strong>PRO</strong> screwdrivers provide unmatched<br />
performance for fastening small<br />
screws in a wide range of industrial<br />
assembly applications.<br />
Reversible and fitted with quick<br />
change chuck hexagon bits, <strong>PRO</strong><br />
screwdrivers are available in four<br />
different models.<br />
<strong>PRO</strong> impact clutch screwdrivers<br />
afford the fastest rundown with<br />
Assembly tools selection guide<br />
W2110<br />
W2111<br />
Type Machine screw<br />
4.8<br />
W2210<br />
W2211<br />
W2310<br />
W2311<br />
projects or any other application that<br />
requires high torque output.<br />
Simply choose the <strong>PRO</strong> impact<br />
wrenches that handle the torque<br />
range you require. As a general rule,<br />
we recommend selecting the impact<br />
wrench that has your ideal torque<br />
value within the middle of the tool’s<br />
Impact Wrenches recommended torque range<br />
Screwdrivers selection guide<br />
Machine screw<br />
8.8<br />
W2214XT W2219<br />
W2215XTC W2220<br />
W2315 W2320<br />
machine screws for general fastening<br />
applications where accuracy is not<br />
critical.<br />
<strong>PRO</strong> shut-off clutch screwdrivers<br />
are designed for critical fastening<br />
applications using machine screws<br />
or plastic screws. Adjustable torque<br />
settings deliver extreme accuracy of<br />
the final fastening torque.<br />
<strong>PRO</strong> slip clutch screwdrivers offer<br />
Thread rolling<br />
screw-M<br />
W2225<br />
W2226<br />
Thread forming<br />
screw-ST<br />
www.pro-powertools.com<br />
torque range.<br />
Naturally, the actual final applied<br />
torque value may differ slightly from<br />
the design torque value, depending<br />
on factors such as fastener type and<br />
size, joint rate and air pressure.<br />
W2227<br />
Thread forming<br />
screw-ST. plastic<br />
M42<br />
M36<br />
M30<br />
M27<br />
M24<br />
M22<br />
M20<br />
M18<br />
M16<br />
M14<br />
M12<br />
M10<br />
M6 / M8<br />
adjustable torque settings for versatility<br />
and convenience in general<br />
fastening applications using sheet<br />
metal screws, wood screws and<br />
self-drilling screws.<br />
<strong>PRO</strong> direct drive screwdrivers are<br />
designed for use with self-drilling<br />
screws and wood screws for basic<br />
fastening applications that do not<br />
require critical torque control.<br />
Self drilling<br />
screw-S<br />
Wood screw<br />
Impact clutch Recommended Recommended Recommended Recommended Not OK Recommended Recommended<br />
Direct drive OK OK OK OK Not OK Recommended Recommended<br />
Slip clutch OK OK OK Recommended OK Recommended Recommended<br />
Shut-off clutch Recommended Recommended Recommended OK Recommended OK Not OK
The <strong>PRO</strong> wrenches consist of a wide range<br />
of tools to suit your needs. <strong>PRO</strong> Compact are<br />
lightweight tools with composite housing and<br />
twin hammer mechanism for the best power-<br />
Impact Wrenches<br />
to-weight ratio. All impact wrenches are built for<br />
speed and comfort. Regardless of your choice<br />
within the <strong>PRO</strong> range the tool will do the job for<br />
you.<br />
7
8<br />
<strong>PRO</strong> COMPACT W2310<br />
<strong>PRO</strong> COMPACT W2315<br />
Square drive 1/2”<br />
Clutch type Twin hammer<br />
Capacity M22<br />
Torque range 236 - 450 ft lb<br />
Max torque fwd 575 ft lb<br />
Free speed 7 000 rpm<br />
Weight 4.41 lb<br />
Length 7.48 in<br />
Air consumption 25.4 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level 6.75 m/s 2<br />
Ordering No. 8434 1245 15<br />
<strong>PRO</strong> COMPACT LINE<br />
IMPACT WRENCHES<br />
High-powered. Ultralight. A smooth operator.<br />
Perfect for tackling the toughest industrial jobs, <strong>PRO</strong> Compact Impact<br />
Wrenches deliver the best power-to-weight ratio within the <strong>PRO</strong> range.<br />
Powered by an advanced twin hammer mechanism, these compact<br />
impacts deliver virtuoso performance and state-of the-art vibration<br />
damping and noise reduction technology.<br />
Square drive 3/8”<br />
Clutch type Twin hammer<br />
Capacity M14<br />
Torque range 162 - 266 ft lb<br />
Max torque fwd 295 ft lb<br />
Free speed 10 000 rpm<br />
Weight 2.75 lb<br />
Length 6.30 in<br />
Air consumption 17.6 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level 5 m/s 2<br />
Ordering No. 8434 1245 10<br />
www.pro-powertools.com<br />
<strong>PRO</strong> COMPACT W2311<br />
Square drive 1/2”<br />
Clutch type Twin hammer<br />
Capacity M14<br />
Torque range 162 - 266 ft lb<br />
Max torque fwd 295 ft lb<br />
Free speed 10 000 rpm<br />
Weight 2.75 lb<br />
Length 6.30 in<br />
Air consumption 17.6 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level 5 m/s 2<br />
Ordering No. 8434 1245 11<br />
<strong>PRO</strong> COMPACT W2320<br />
Square drive 3/4”<br />
Clutch type Twin hammer<br />
Capacity M27<br />
Torque range 250 - 640 ft lb<br />
Max torque fwd 775 ft lb<br />
Free speed 4 000 rpm<br />
Weight 8.38 lb<br />
Length 9.45 in<br />
Air consumption 40.26 cfm<br />
Air inlet thread 3/8” NPT<br />
Recommended hose size 1/2”<br />
Sound level 85 dB(A)<br />
Vibration level 4.2 m/s 2<br />
Ordering No. 8434 1245 20
<strong>PRO</strong> COMPACT W2315XP<br />
Square drive 1/2”<br />
Clutch type Twin hammer<br />
Capacity M22<br />
Torque range 236 - 450 ft lb<br />
Max torque fwd 575 ft lb<br />
Free speed 7 000 rpm<br />
Weight 5.56 lb<br />
Length 7.48 in<br />
Air consumption 25.4 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level 6.75 m/s 2<br />
Ordering No. 8434 1245 17<br />
<strong>PRO</strong> EXPLOSION <strong>PRO</strong>OF<br />
IMPACT WRENCHES<br />
ATEX-certified for hazardous environments<br />
<strong>PRO</strong> Compact XP tools meet stringent European standards and comply<br />
with ATEX Directive I M2 II 2G IIB T4 II2D 135°. These explosion-proof products<br />
are designed for use in hazardous environments, such as coal mines,<br />
petrochemical plants or wherever a spark-reduced safety tool is required.<br />
<strong>PRO</strong> COMPACT W2320XP<br />
Square drive 3/4”<br />
Clutch type Twin hammer<br />
Capacity M27<br />
Torque range 250 - 640 ft lb<br />
Max torque fwd 775 ft lb<br />
Free speed 4 000 rpm<br />
Weight 10.41 lb<br />
Length 9.45 in<br />
Air consumption 40.2 cfm<br />
Air inlet thread 3/8” NPT<br />
Recommended hose size 1/2”<br />
Sound level 85 dB(A)<br />
Vibration level 4.2 m/s 2<br />
Ordering No. 8434 1245 22<br />
www.pro-powertools.com 9
10<br />
<strong>PRO</strong> W2110 HEX<br />
Square drive HEX<br />
Clutch type Double hammer<br />
Capacity M12<br />
Torque range 9 - 52 ft lb<br />
Max torque fwd 69 ft lb<br />
Free speed 8 000 rpm<br />
Weight 2.16 lb<br />
Length 6.30 in<br />
Air consumption 18.4 cfm<br />
Air inlet thread 1/4" NPT<br />
Recommended hose size 3/8"<br />
Sound level 84 dB(A)<br />
Vibration level
<strong>PRO</strong> W2219 3/4”<br />
Square drive 3/4"<br />
Clutch type Single hammer<br />
Capacity M22<br />
Torque range 330 - 516 ft lb<br />
Max torque fwd 760 ft lb<br />
Free speed 3 800 rpm<br />
Weight 11.2 lb<br />
Length 10.0 in<br />
Air consumption 25.8 cfm<br />
Air inlet thread 1/4" NPT<br />
Recommended hose size 3/8"<br />
Sound level 91 dB(A)<br />
Vibration level 3.3 m/s 2<br />
Ordering No. 8434 1244 37<br />
<strong>PRO</strong> W2225C 1”<br />
Square drive 1"<br />
Clutch type Single hammer<br />
Capacity M30<br />
Torque range 295 - 767 ft lb<br />
Max torque fwd 1224 ft lb<br />
Free speed 3 800 rpm<br />
Weight 22.3 lb<br />
Length 11.4 in<br />
Air consumption 42.2 cfm<br />
Air inlet thread 3/8" NPT<br />
Recommended hose size 1/2"<br />
Sound level 92 dB(A)<br />
Vibration level 3.6 m/s 2<br />
Ordering No. 8434 1244 54<br />
<strong>PRO</strong> W2227 1”<br />
Square drive 1"<br />
Clutch type Twin hammer<br />
Capacity M30<br />
Torque range 495 - 885 ft lb<br />
Max torque fwd 960 ft lb<br />
Free speed 5 000 rpm<br />
Weight 15 lb<br />
Length 14 in<br />
Air consumption 38.1 cfm<br />
Air inlet thread 3/8" NPT<br />
Recommended hose size 1/2"<br />
Sound level 104 dB(A)<br />
Vibration level 8.5 m/s 2<br />
Ordering No. 8434 1244 58<br />
IMPACT WRENCHES<br />
<strong>PRO</strong> W2220 3/4”<br />
Square drive 3/4"<br />
Clutch type Twin hammer<br />
Capacity M30<br />
Torque range 480 - 1100 ft lb<br />
Max torque fwd 1300 ft lb<br />
Free speed 3 800 rpm<br />
Weight 13.9 lb<br />
Length 10.6 in<br />
Air consumption 38.1 cfm<br />
Air inlet thread 3/8" NPT<br />
Recommended hose size 1/2"<br />
Sound level 84 dB(A)<br />
Vibration level 9.0 m/s 2<br />
Ordering No. 8434 1244 39<br />
<strong>PRO</strong> W2226C 1”<br />
Square drive 1"<br />
Clutch type Twin hammer<br />
Capacity M30<br />
Torque range 480 - 1100 ft lb<br />
Max torque fwd 1300 ft lb<br />
Free speed 3 800 rpm<br />
Weight 15 lb<br />
Length 10.6 in<br />
Air consumption 38.1 cfm<br />
Air inlet thread 3/8" NPT<br />
Recommended hose size 1/2"<br />
Sound level 97 dB(A)<br />
Vibration level 9.0 m/s 2<br />
Ordering No. 8434 1244 56<br />
Max forward torque is measured with a<br />
trigger time of 5 sec. Max torque in reverse<br />
is between 10-20% higher than the<br />
forward torque to ensure that a joint can<br />
be loosened with the same tool.<br />
www.pro-powertools.com 11
12<br />
IMPACT WRENCHES INCLUDING <strong>POWER</strong> SOCKETS<br />
Protective covers<br />
Model Ordering No.<br />
W2214XT 4112 0817 00<br />
W2215XTC 4112 1347 00<br />
W2219 4112 0396 00<br />
W2315 4112 0396 15<br />
W2310 KIT<br />
3/8” impact wrench with a 5pcs socket<br />
delivered in a practical carrying box.<br />
Metric sockets 8, 10, 13, 15, 17<br />
Ordering No. 8434 1245 12<br />
W2311 KIT<br />
1/2” impact wrench with a 5pcs socket<br />
delivered in a practical carrying box.<br />
Metric sockets 10, 13, 14, 15, 17<br />
Ordering No. 8434 1245 13<br />
W2315 KIT<br />
1/2” impact wrench with a 5pcs socket<br />
delivered in a practical carrying box.<br />
Metric sockets 13, 15, 17, 19, 21<br />
Ordering No. 8434 1245 16<br />
W2214XT KIT<br />
1/2” impact wrench with a 5pcs socket<br />
delivered in a practical carrying box.<br />
Metric sockets 13, 15, 17, 19, 21<br />
Ordering No. 8434 1244 71<br />
W2215XTC KIT<br />
1/2” impact wrench with a 5pcs socket<br />
delivered in a practical carrying box.<br />
Metric sockets 13, 15, 17, 19, 21<br />
Ordering No. 8434 1244 81<br />
www.pro-powertools.com
All powerful and reversible, <strong>PRO</strong> ratchet wrenches<br />
are designed for easy access in confined<br />
spaces. Get more torque from the <strong>PRO</strong> Compact<br />
Ratchet Wrenches<br />
line with its unique composite housing that provides<br />
improved ergonomics, thanks to reduced<br />
vibrations and greater power-to-weight ratio.<br />
13
14<br />
<strong>PRO</strong> COMPACT W2300 3/8”<br />
Square drive 3/8”<br />
Capacity M12<br />
Torque range 3.7 - 50 ft lb<br />
Free speed 150 rpm<br />
Weight 2.65 lb<br />
Length 10.2 in<br />
Air consumption 15.3 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level < 2.5 m/s 2<br />
Ordering No. 8431 0350 00<br />
<strong>PRO</strong> COMPACT W2302 1/4”<br />
Square drive 1/4”<br />
Capacity M8<br />
Torque range 2.2 - 22 ft lb<br />
Free speed 200 rpm<br />
Weight 1.1 lb<br />
Length 7.7 in<br />
Air consumption 7.2 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level < 2.5 m/s 2<br />
Ordering No. 8431 0350 04<br />
<strong>PRO</strong> COMPACT LINE<br />
RATCHET WRENCHES<br />
• Composite • Swivelling air inlet and exhaust • Adjustable torque • Good ergonomics<br />
www.pro-powertools.com<br />
<strong>PRO</strong> COMPACT W2301 1/2”<br />
Square drive 1/2”<br />
Capacity M12<br />
Torque range 3.7 - 50 ft lb<br />
Free speed 150 rpm<br />
Weight 2.65 lb<br />
Length 10.2 in<br />
Air consumption 15.3 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level < 2.5 m/s 2<br />
Ordering No. 8431 0350 01<br />
<strong>PRO</strong> COMPACT W2303 3/8”<br />
Square drive 3/8”<br />
Capacity M8<br />
Torque range 2.2 - 22 ft lb<br />
Free speed 200 rpm<br />
Weight 1.1 lb<br />
Length 7.7 in<br />
Air consumption 7.2 cfm<br />
Air inlet thread 1/4” NPT<br />
Recommended hose size 3/8”<br />
Sound level 85 dB(A)<br />
Vibration level < 2.5 m/s 2<br />
Ordering No. 8431 0350 03
<strong>PRO</strong> W2200A 3/8”<br />
Square drive 3/8"<br />
Capacity M10<br />
Torque range 3.7 - 29.5 ft lb<br />
Free speed 150 rpm<br />
Weight 2.4 lb<br />
Length 10.4 in<br />
Air consumption 16.1 cfm<br />
Air inlet thread 1/4" NPT<br />
Recommended hose size 3/8"<br />
Sound level 88 dB(A)<br />
Vibration level 4.3 m/s 2<br />
Ordering No. 8431 0349 10<br />
RATCHET WRENCHES<br />
<strong>PRO</strong> W2201 1/2”<br />
Square drive 1/2"<br />
Capacity M10<br />
Torque range 3.7 - 29.5 ft lb<br />
Free speed 150 rpm<br />
Weight 2.4 lb<br />
Length 10.4 in<br />
Air consumption 16.1 cfm<br />
Air inlet thread 1/4" NPT<br />
Recommended hose size 3/8"<br />
Sound level 88 dB(A)<br />
Vibration level 4.3 m/s 2<br />
Ordering No. 8431 0349 02<br />
www.pro-powertools.com 15
16<br />
<strong>POWER</strong> SOCKETS FOR IMPACT WRENCHES AND RATCHET WRENCHES<br />
Socket<br />
size mm<br />
UNIVERSAL JOINTS<br />
Male Square<br />
In<br />
Square<br />
drive in<br />
Length<br />
in<br />
Ordering No.<br />
3/8 3/8 2 3/8 4023 1182 00<br />
1/2 1/2 3 4023 0745 00<br />
3/4 3/4 3 1/2 4023 0857 00 B<br />
1 1 4 13/32 4023 1060 00 C<br />
SOCKET ADAPTERS<br />
Male Square<br />
In<br />
Square drive 3/8"<br />
Ordering No.<br />
Square<br />
drive in<br />
Length<br />
in<br />
Ordering No.<br />
1/2 3/8 1 3/8 4023 1153 00<br />
3/8 1/2 1 1/2 4023 1154 00<br />
1/2 3/4 2 2/8 4023 0909 00 A<br />
1 3/4 2 1/2 4023 1157 00 B<br />
3/4 1 3 4023 0868 00 C<br />
LOCKING PIN AND O-RINGS<br />
Ref letter Ordering No.<br />
A 4026 5000 90<br />
B 4026 5000 91<br />
C 4026 5000 92<br />
ACCESSORIES – IMPACT AND RATCHET WRENCHES<br />
Square drive 1/2"<br />
Ordering No.<br />
Square drive 3/4"<br />
Ordering No.<br />
Pin and O-ring<br />
ref letter<br />
Pin and O-ring<br />
ref letter<br />
Pin and O-ring ref<br />
letter<br />
EXTENSIONS<br />
Male Square In<br />
www.pro-powertools.com<br />
Square<br />
drive in<br />
Length<br />
in<br />
Ordering<br />
No.<br />
3/8 3/8 6 4023 1164 06<br />
1/2 1/2 5 4023 0734 00<br />
1/2 1/2 10 4023 0735 00<br />
3/4 3/4 7 4023 0854 00 A<br />
3/4 3/4 13 4023 0855 00 A<br />
1 1 7 4023 0751 00 C<br />
1 1 13 4023 0867 00 C<br />
TORSION BAR<br />
Width across<br />
flats in<br />
Length<br />
in<br />
Square drive 1"<br />
Ordering No.<br />
Pin and O-ring<br />
ref letter<br />
8 4026 0908 00<br />
9 4026 0909 00<br />
10 4026 0910 00 4026 1210 00<br />
11 4026 0911 00 4026 1211 00<br />
12 4026 0912 00 4026 1212 00<br />
13 4026 0913 00 4026 1213 00<br />
14 4026 0914 00 4026 1214 00<br />
15 4026 0915 00 4026 1215 00<br />
16 4026 0916 00 4026 1216 00<br />
17 4026 0917 00 4026 1217 00<br />
18 4026 0918 00 4026 1218 00 4026 1918 00 A<br />
19 4026 0919 00 4026 1219 00 4026 1919 00 A<br />
21 4026 1221 00 4026 1921 00 A<br />
22 4026 1222 00 4026 1922 00 A<br />
24 4026 1224 00 4026 1924 00 A 4026 2524 00 C<br />
27 4026 1227 00 4026 1927 00 A 4026 2527 00 C<br />
30 4026 1930 00 A 4026 2530 00 C<br />
32 4026 1932 00 A 4026 2532 00 C<br />
34 4026 1934 00 A 4026 2534 00 C<br />
36 4026 1936 00 A 4026 2536 00 C<br />
41 4026 2541 00 C<br />
46 4026 2546 00 C<br />
50 4026 2550 00 C<br />
55 4026 2555 00 C<br />
60 4026 2560 00 C<br />
65 4026 2565 00 C<br />
70<br />
75<br />
80<br />
in<br />
5/16 4026 0908 00<br />
3/8 4026 1012 00 4026 1312 00<br />
13/32 4026 0910 00<br />
7/16 4026 0911 00 4026 1211 00<br />
15/32 4026 0912 00<br />
1/2 4026 1016 00 4026 1316 00<br />
9/16 4026 1018 00 4026 1318 00<br />
3/4 4026 0919 00 4026 1219 00 4026 1919 00 A<br />
15/16 4026 1224 00 4026 1924 00 A 4026 2524 00 C<br />
1 1/8 4026 1336 00 4026 2036 00 A 4026 2636 00<br />
1 5/16 4026 2042 00 A 4026 2642 00<br />
1 1/2 4026 2048 00 A 4026 2648 00<br />
Pin and O-ring<br />
ref letter<br />
Torque ft lbs Ordering No.<br />
2/3 8 7/16 70 4023 1284 00<br />
3/4 8 7/16 70 4023 1286 00<br />
3/4 8 7/16 88 4023 1287 00<br />
5/6 8 7/16 74 4023 1303 00
For unmatched precision fastening, use<br />
<strong>PRO</strong> screwdrivers. These highly engineered<br />
fastening tools meet the demands for industrial<br />
per form ance, accuracy and durability.<br />
Screwdrivers<br />
Four different clutch types are available:<br />
impact drive, direct drive, slip clutch and shut-off<br />
coupling. Well-balanced for ergo nomics, <strong>PRO</strong><br />
screwdrivers take productivity to a whole new level.<br />
17
18<br />
For fast assembly and disassembly, <strong>PRO</strong> Impact<br />
Drive Screwdrivers with double hammer get the<br />
job done. Designed for the ultimate in operator<br />
<strong>PRO</strong> S2480 IMPACT DRIVE<br />
Chuck size 1/4" Hex QC<br />
Clutch type Double hammer<br />
Capacity M5<br />
Torque range 4.4 - 9.6 ft lb<br />
Max torque 14.8 ft lb<br />
Speed 6 500 rpm<br />
Weight 1.7 lb<br />
Length 5.2 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 77 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 90<br />
<strong>PRO</strong> Direct Drive Screwdrivers stall when<br />
they reach max torque and are well suited for<br />
self-drilling screws and wood screws.<br />
<strong>PRO</strong> S2305 DIRECT DRIVE<br />
Chuck size 1/4" Hex QC<br />
Capacity M8<br />
Wood screw No 12<br />
Torque range - 8.9 ft lb<br />
Speed 750 rpm<br />
Weight 2 lb<br />
Length 7.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 76 dB(A)<br />
Air consumption 11.9 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 28<br />
SCREWDRIVERS<br />
www.pro-powertools.com<br />
comfort, these lightweight tools deliver exceptional<br />
performance. Both models are reversible with a<br />
simple flip off lever on the side of the tool shaft.<br />
<strong>PRO</strong> S2481 IMPACT DRIVE<br />
Chuck size 1/4" Hex QC<br />
Clutch type Double hammer<br />
Capacity M6<br />
Torque range 8.1 - 14.8 ft lb<br />
Max torque 20.6 ft lb<br />
Speed 5 000 rpm<br />
Weight 1.9 lb<br />
Length 5.6 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 79 dB(A)<br />
Air consumption 17 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 92<br />
<strong>PRO</strong> S2326 DIRECT DRIVE<br />
Chuck size 1/4" Hex QC<br />
Capacity M6<br />
Wood screw No 8<br />
Torque range - 3.3 ft lb<br />
Speed 2 400 rpm<br />
Weight 1.8 lb<br />
Length 7 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 76 dB(A)<br />
Air consumption 11.9 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 36
<strong>PRO</strong> Slip-Clutch Screwdrivers provide an<br />
implied pulsating force, or “slips”, once you<br />
reach the desired torque. Top features include<br />
adjustable torque settings, wings for comfort,<br />
trigger and push start for pistol grips, and<br />
<strong>PRO</strong> S2308-C SLIP CLUTCH<br />
Chuck size 1/4" Hex QC<br />
Capacity M6<br />
Torque range 1.8 - 8.1 ft lb<br />
Speed 950 rpm<br />
Weight 2.4 lb<br />
Length 8.9 in<br />
Vibration level 3.7 m/s 2<br />
Sound level 77 dB(A)<br />
Air consumption 17.8 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 20<br />
<strong>PRO</strong> Shut-off Screwdrivers have fast and accurate<br />
shut-off clutch for smooth performance and<br />
<strong>PRO</strong> S2450-P SHUT-OFF<br />
Chuck size 1/4" Hex QC<br />
Capacity M5<br />
Torque range 1.8 - 3.7 ft lb<br />
Speed 1100 rpm<br />
Weight 2.4 lb<br />
Length 8.9 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 75 dB(A)<br />
Air consumption 12.7 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 84<br />
SCREWDRIVERS<br />
<strong>PRO</strong> S2340-C SLIP CLUTCH<br />
Chuck size 1/4" Hex QC<br />
Capacity M3<br />
Torque range 0.4 - 1.5 ft lb<br />
Speed 1 300 rpm<br />
Weight 2 lb<br />
Length 9.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 72 dB(A)<br />
Air consumption 8.5 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 40<br />
<strong>PRO</strong> S2416-L SHUT-OFF<br />
Chuck size 1/4" Hex QC<br />
Capacity M3<br />
Torque range 0.4 - 1.2 ft lb<br />
Speed 1 500 rpm<br />
Weight 2 lb<br />
Length 9.1 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 71 dB(A)<br />
Air consumption 12.7 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 82<br />
lever and push start for straight models. These<br />
screwdrivers are suitable for soft joints or when<br />
the torque level may temporarily peak during the<br />
homing phase when using sheet metal screws,<br />
wood screws or self-tapping screws.<br />
<strong>PRO</strong> S2370-C SLIP CLUTCH<br />
Chuck size 1/4" Hex QC<br />
Capacity M5<br />
Torque range 1.5 - 4.4 ft lb<br />
Speed 1 300 rpm<br />
Weight 2 lb<br />
Length 9.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 72 dB(A)<br />
Air consumption 8.5 cfm<br />
Suitable air hose 1/4"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 70<br />
high quality tightening. They are ideal for joints<br />
which require high accuracy in torque.<br />
<strong>PRO</strong> S2426-L SHUT-OFF<br />
Chuck size 1/4" Hex QC<br />
Capacity M4<br />
Torque range 0.9 - 1.9 ft lb<br />
Speed 1 500 rpm<br />
Weight 2 lb<br />
Length 9.1 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 71 dB(A)<br />
Air consumption 12.7 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8431 0257 80<br />
www.pro-powertools.com 19
20<br />
ACCESSORIES – SCREWDRIVERS<br />
N<br />
1/4 75 1/4<br />
1/4<br />
75<br />
1/4 N<br />
N75<br />
1/4 N<br />
1/4 S<br />
S<br />
1/4 75 1/4 75<br />
1/4<br />
1/4<br />
N<br />
S<br />
UNIVERSAL JOINTS 1/4 75<br />
1/4<br />
N S<br />
1/4 75<br />
1/4 <strong>POWER</strong> S BITS 1/4”<br />
1/4 NS<br />
75<br />
1/4<br />
S<br />
1/4 75<br />
1/4<br />
S<br />
Size Ordering No.<br />
S<br />
Size Ordering No.<br />
Slotted Blade width mm Extra hard<br />
3.4 4023 1400 21<br />
25.4<br />
25.4<br />
25.4<br />
25.4<br />
25.4<br />
25.4 3.9<br />
25.4<br />
4.7<br />
25.4 5.5<br />
6.3<br />
4023 1400 22<br />
4023 1400 23<br />
4023 1400 26<br />
4023 1400 27<br />
49.2<br />
49.2<br />
49.2<br />
49.2<br />
7.0 4023 1400 28<br />
Phillips<br />
25.4<br />
25.4<br />
25.4<br />
25.4<br />
Point size<br />
25.4<br />
25.4 1<br />
25.4<br />
2<br />
25.4<br />
3<br />
Extra hard<br />
4023 0696 01<br />
4023 0697 01<br />
4023 0698 01<br />
49.2<br />
49.2<br />
49.2<br />
49.2<br />
Pozi driv<br />
25.4<br />
25.4<br />
25.4<br />
25.4 Point size<br />
25.4<br />
25.4 1<br />
25.4 2<br />
Extra hard<br />
4023 1101 11<br />
4023 1101 12<br />
49.2<br />
49.2<br />
49.2<br />
25.4<br />
Torx 25.4<br />
25.4<br />
25.4<br />
25.4<br />
3<br />
25.4<br />
Point 25.4 size<br />
25.4<br />
T10<br />
25.4<br />
T15<br />
T20<br />
4023 1101 13 49.2<br />
Medium hard49.2<br />
49.2<br />
4023 1321 00 49.2<br />
49.2<br />
4023 1331 00 49.2<br />
4023 1322 00<br />
25.4<br />
25.4<br />
Allen 25.4<br />
25.4 head<br />
25.4<br />
T25<br />
25.4<br />
25.4<br />
25.4 25.4 T30<br />
mm/in<br />
25.4<br />
3<br />
4<br />
4023 1332 00<br />
4023 1323 00 49.2<br />
49.2<br />
Extra hard 49.2<br />
49.2<br />
4023 0819 00 49.2<br />
4023 1320 00<br />
5/32 4023 0705 00<br />
5 4023 0820 00<br />
6 4023 0821 00<br />
Type Ordering No.<br />
N<br />
Holder for insert bits Magnetic holder 4023 0707 00<br />
www.pro-powertools.com<br />
N<br />
1/4 75<br />
1/4<br />
N<br />
S<br />
Slotted Blade width mm Extra hard<br />
4.7 4023 2020 24<br />
49.2<br />
49.2<br />
49.2<br />
6.3<br />
7.0<br />
4023 2020 26<br />
4023 2020 27<br />
49.2<br />
7.9 4023 2020 28<br />
9.1 4023 2020 29<br />
Phillips Point size Extra hard<br />
49.2<br />
49.2<br />
49.2<br />
49.2<br />
Pozi driv<br />
1<br />
2<br />
3<br />
Point size<br />
4023 2320 21<br />
4023 2320 22<br />
4023 2320 23<br />
Extra hard<br />
49.2<br />
49.2<br />
49.2<br />
1<br />
2<br />
4023 2420 21<br />
4023 2420 22<br />
49.2<br />
3 4023 2420 23<br />
Torx<br />
49.2<br />
49.2<br />
49.2<br />
49.2<br />
Point size<br />
T10<br />
T15<br />
T20<br />
Medium hard<br />
4023 2220 23<br />
4023 2220 24<br />
4023 2220 25<br />
T25 4023 2220 26<br />
T30 4023 2220 28<br />
49.2<br />
Allen 49.2 head<br />
49.2 49.2<br />
49.2<br />
mm/in<br />
3<br />
4<br />
Extra hard<br />
4023 0710 00<br />
4023 0711 00<br />
5/32 4023 0681 00<br />
5 4023 0712 00<br />
6 4023 0906 00
Strong and robust, <strong>PRO</strong> drills deliver superior<br />
hole quality for demanding applications.<br />
Highly accurate and efficient, these tools<br />
offer unmatched speed, power, accuracy<br />
Drills<br />
and smooth silent-running operation. Features<br />
include air exhaust through the handle and an<br />
ergonomic handle for working comfort.<br />
21
22<br />
Choose the right drill for the right material<br />
Material/cutting speed<br />
Model rpm Mild steel<br />
65-100<br />
SFPM<br />
D2112 5400<br />
Drill dim. / ”<br />
a) Drill size larger than standard chuck capacity.<br />
Alloy steel<br />
15-50 SFPM<br />
Cast iron<br />
50-65 SFPM<br />
www.pro-powertools.com<br />
Aluminium<br />
and bronze<br />
165-265 SFPM<br />
Wood and<br />
board 265-500<br />
SFPM<br />
Composite<br />
165-330<br />
SFPM<br />
1/32" - 1/16" - - 3/32" - 3/16" 5/32" - 5/16" 1/32" - 3/16"<br />
D2116 2400 3/32" - 1/4" 1/32" - 1/8" 1/16" - 5/32" 5/16" - 1/2" 5/16" - 1/2" -<br />
D2163 2000 3/32" - 1/4" 1/32" - 1/8" 1/16" - 5/32" 5/16" - 1/2" 5/16" - 1/2" -<br />
D2121 750 5/16" - 1/2" 1/8" - 5/16" 9/32" - 1/2" - - -<br />
D2148-R 750 5/16" - 1/2" 1/8" - 5/16" 9/32" - 1/2" - - -
<strong>PRO</strong> D2112<br />
Chuck capacity 1/4"<br />
Mount 3/8"-24UNF<br />
Output 0.47 hp<br />
Speed 5 400 rpm<br />
Weight 2.2 lb<br />
Length incl chuck 8.1 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 78 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0405 05<br />
<strong>PRO</strong> D2121<br />
Chuck capacity 1/2"<br />
Mount 3/8"-24UNF<br />
Output 0.46 hp<br />
Speed 750 rpm<br />
Weight 3.1 lb<br />
Length incl chuck 9.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 78 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0405 21<br />
<strong>PRO</strong> D2163<br />
Chuck capacity 3/8"<br />
Mount 3/8"-24UNF<br />
Output 0.44 hp<br />
Speed 2 000 rpm<br />
Weight 2.4 lb<br />
Length incl chuck 9.5 in<br />
Height incl chuck 5.0 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 77 dB(A)<br />
Air consumption 19.7 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0410 08<br />
DRILLS<br />
<strong>PRO</strong> D2116<br />
Chuck capacity 3/8"<br />
Mount 3/8"-24UNF<br />
Output 0.47 hp<br />
Speed 2 400 rpm<br />
Weight 2.2 lb<br />
Length incl chuck 8.3 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 78 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0405 13<br />
<strong>PRO</strong> D2148-R Reversible<br />
Chuck capacity 1/2"<br />
Mount 3/8"-24UNF<br />
Output 0.34 hp<br />
Speed 750 rpm<br />
Weight 3.2 lb<br />
Length incl chuck 9.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 77 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0407 03<br />
Drills with quick change chuck on page 24<br />
www.pro-powertools.com 23
24<br />
<strong>PRO</strong> D2112Q<br />
Chuck capacity 3/8"<br />
Mount 3/8"-24UNF<br />
Output 0.47 hp<br />
Speed 5 400 rpm<br />
Weight 2.2 lb<br />
Length incl chuck 8.3 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 78 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0405 10<br />
<strong>PRO</strong> D2121Q<br />
Chuck capacity 1/2"<br />
Mount 3/8"-24UNF<br />
Output 0.46 hp<br />
Speed 750 rpm<br />
Weight 3.1 lb<br />
Length incl chuck 9.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 78 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0405 25<br />
<strong>PRO</strong> D2148-RQ<br />
Chuck capacity 1/2"<br />
Mount 3/8"-24UNF<br />
Output 0.34 hp<br />
Speed 750 rpm<br />
Weight 3.2 lb<br />
Length incl chuck 9.8 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 77 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0407 05<br />
DRILLS QUICK CHANGE CHUCKS<br />
www.pro-powertools.com<br />
<strong>PRO</strong> D2116Q<br />
Chuck capacity 3/8"<br />
Mount 3/8"-24UNF<br />
Output 0.47 hp<br />
Speed 2 400 rpm<br />
Weight 2.2 lb<br />
Length incl chuck 8.3 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 78 dB(A)<br />
Air consumption 21.2 cfm<br />
Suitable air hose 3/8"<br />
Air inlet thread 1/4" NPT<br />
Ordering No. 8421 0405 15<br />
Optional accessories for D2163<br />
Ordering No.<br />
Exhaust air hose 4150 1077 80<br />
Support handle 4110 1355 85<br />
Optional accessories for all drills<br />
Key chucks key included,<br />
mount 3/8”-24 UNF Ordering No.<br />
1/4” Chuck capacity<br />
(Standard with D2112) 4021 0444 00<br />
1/16” - 3/8” Chuck capacity<br />
(Standard with D2116,<br />
D2163) 4021 0446 00<br />
3/32” - 1/2” Chuck capacity<br />
(Standard with D2121,<br />
D2148-R) 4021 0447 00<br />
1/16” - 3/8” Keyless chuck<br />
(Standard with D2112Q,<br />
D2116Q) 4021 0497 90<br />
1/16” - 1/2” Keyless chuck<br />
(Standard with D2121Q,<br />
D2148-RQ) 4021 0496 90<br />
Quick-change chuck for 1/4”<br />
bits<br />
mount 3/8”-24 UNF 4021 0443 00<br />
Drill depth stop<br />
to be used with support<br />
handle<br />
4110 1370 80<br />
4110 1355 81<br />
Use in/for 2112/16/21<br />
Exhaust air hose 4210 2053 00<br />
2148-R Exhaust air hose<br />
(D2112, D2116, D2121) 4210 2929 00
With unequalled power-to-weight ratio, the<br />
G2510 is the most powerful one-hand angle<br />
grinder in the <strong>PRO</strong> range. The backpiece with<br />
Angle grinder<br />
the trigger is able to rotate to provide easy<br />
access to tight spaces. The G2510 is also<br />
equipped with speed governor.<br />
25
26<br />
<strong>PRO</strong> G2510<br />
Speed 12000 rpm<br />
Output 1.1 hp<br />
Max wheel diam 5"<br />
Spindle thread 5/8"<br />
Vibration level 7 m/s 2<br />
Sound level 82 dB(A)<br />
Length 8.1 in<br />
Weight 3.5 lb<br />
Air consumption 36 cfm<br />
Air inlet thread 3/8" NPT<br />
Suitable air hose 1/2"<br />
Ordering No. 8423 0316 04<br />
Exhaust air hoses<br />
Model Ordering No.<br />
G2510 4150 1532 01<br />
Adapter<br />
Model Ordering No.<br />
UNF 3/8”-24 x M14 4021 0435 00<br />
ACCESSORIES - ANGLE GRINDERS<br />
www.pro-powertools.com<br />
Vibration damped handle<br />
Model Ordering No.<br />
G2510 4150 1521 80
Powerful yet lightweight, <strong>PRO</strong> die grinders<br />
make easy work of fine grinding and finishing<br />
as well as buffing and rough finishing. Check<br />
out the smooth operation of the G2414 and<br />
Die Grinders<br />
G2424 series with unique suspension that<br />
prevents burr chatter and minimizes vibration<br />
transfer. The G2414 and G2424 series are also<br />
equipped with speed governors.<br />
27
28<br />
<strong>PRO</strong> G2412-2<br />
Speed 20 500 rpm<br />
Collet 1/4"<br />
Output 0.47 hp<br />
Length 7 in<br />
Vibration level 3.6 m/s 2<br />
Sound level 78 dB(A)<br />
Weight 1.1 lb<br />
Air consumption 21.8 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 39<br />
<strong>PRO</strong> G2414<br />
DIE GRINDERS<br />
Model G2414 S088 G2414 S125 G2414 S155 G2414 S205 G2414 S255<br />
Speed 8 800 rpm 12 500 rpm 15 500 rpm 20 500 rpm 25 500 rpm<br />
Collet 1/4" 1/4" 1/4" 1/4" 1/4"<br />
Output 0.67 hp 1.00 hp 1.14 hp 1.20 hp 1.27 hp<br />
Length 8.5 in 8.5 in 8.5 in 8.5 in 8.5 in<br />
Vibration level < 2.5 m/s 2 < 2.5 m/s 2 < 2.5 m/s 2 3.1 m/s 2 < 2.5 m/s 2<br />
Sound level 71 dB(A) 74 dB(A) 77 dB(A) 81 dB(A) 87 dB(A)<br />
Weight 1.7 lb 1.7 lb 1.7 lb 1.7 lb 1.7 lb<br />
Air consumption 8.9 cfm 11.2 cfm 15.3 cfm 19 cfm 30.7 cfm<br />
Air inlet thread 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT<br />
Suitable air hose 1/2" 1/2" 1/2" 1/2" 1/2"<br />
Ordering No. 8423 0312 65 8423 0312 66 8423 0312 67 8423 0312 68 8423 0312 69<br />
www.pro-powertools.com
<strong>PRO</strong> G2422<br />
Model G2422-2<br />
Speed 20 500 rpm<br />
Collet 1/4"<br />
Output 0.47 hp<br />
Length 10.9 in<br />
Vibration level 5.9 m/s 2<br />
Sound level 78 dB(A)<br />
Weight 1.5 lb<br />
Air consumption 21.8 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 54<br />
<strong>PRO</strong> G2424<br />
EXTENDED DIE GRINDERS<br />
Model G2424 S880 G2424 S125 G2424 S155 G2424 S205 G2424 S255<br />
Speed 8 800 rpm 12 500 rpm 15 500 rpm 20 500 rpm 25 500 rpm<br />
Collet 1/4" 1/4" 1/4" 1/4" 1/4"<br />
Output 0.59 hp 0.94 hp 1.00 hp 1.14 hp 1.20 hp<br />
Length 12.4 in 12.4 in 12.4 in 12.4 in 12.4 in<br />
Vibration level 10.0 m/s 2 10.3 m/s 2 5.6 m/s 2 2.6 m/s 2 < 2.5 m/s 2<br />
Sound level 70 dB(A) 74 dB(A) 77 dB(A) 82 dB(A) 86 dB(A)<br />
Weight 2.1 lb 2.1 lb 2.1 lb 2.1 lb 2.1 lb<br />
Air consumption 8.9 cfm 11.2 cfm 15.3 cfm 19 cfm 30.7 cfm<br />
Air inlet thread 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT 3/8" NPT<br />
Suitable air hose 1/2" 1/2" 1/2" 1/2" 1/2"<br />
Ordering No. 8423 0312 72 8423 0312 73 8423 0312 74 8423 0312 75 8423 0312 76<br />
<strong>PRO</strong> G2451<br />
Collet size 1/8” & 3 mm<br />
Output 0.11 hp<br />
Max speed 80 000 rpm<br />
Weight 1.1 lb<br />
Length 5 1/2”<br />
Air inlet 1/4” NPT<br />
Hose size 3/16”<br />
Sound level 73 dB(A)<br />
Vibration < 2.5 m/s 2<br />
Ordering No. 8423 0313 01<br />
Optional accessories for G2412, G2414, G2422, G2424<br />
Collet chuck complete Ordering No.<br />
3 mm 4150 1049 81<br />
6 mm 4150 1049 83<br />
8 mm 4150 1049 84<br />
1/8” 4150 1049 85<br />
1/4” 4150 1049 88<br />
www.pro-powertools.com 29
30<br />
<strong>PRO</strong>’s range of sanding and polishing tools<br />
deliver surface finishing at its best. For rough<br />
surface sanding, choose pistol grip sanders<br />
and belt sanders. Random orbital sanders fit<br />
Sanding & Polishing<br />
the bill for coarse and fine sanding. For optimal<br />
surface polishing, angle grinders get the job<br />
done.
<strong>PRO</strong> G2302<br />
<strong>PRO</strong> G2402<br />
Speed 12 000 rpm<br />
Pad size 5"<br />
Thread 7/16" UNF<br />
Output 0.27 hp<br />
Length 4.9 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 82 dB(A)<br />
Weight 2.2 lb<br />
Air consumption 25.4 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 02<br />
SANDERS<br />
Enjoy a complete line of pistol grip sanders that handle virtually every need.<br />
Choose from the G2302 mini-pistol sander up to the powerful G2502 sander<br />
with pad sizes ranging from 50 mm (2”) to 11 ” (5”). G2302 pads work with<br />
the 3M Roloc system. All <strong>PRO</strong> sanders feature adjustable speed controlled<br />
by the trigger and air exhaust through the handle.<br />
Speed 17 000 rpm<br />
Pad size 3" 3M Roloc<br />
Thread 1/4"-20UNC<br />
Output 0.23 hp<br />
Length 4.3 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 81 dB(A)<br />
Weight 2.9 lb<br />
Air consumption 18.9 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 14<br />
<strong>PRO</strong> G2302 Kit<br />
Complete set with 2” and 3” backup pads.<br />
10 of each sanding discs 0-80-120 grit for 2”<br />
and 3”. 3 of each 2” and 3” surface preparation<br />
pads (fine. medium and coarse).<br />
Speed 17 000 rpm<br />
Pad size 2" & 3" 3M Roloc<br />
Thread 1/4"-20UNC<br />
Output 0.23 hp<br />
Length 4.3 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 81 dB(A)<br />
Weight 2.9 lb<br />
Air consumption 18.9 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 15<br />
<strong>PRO</strong> G2502<br />
Speed 12 000 rpm<br />
Pad size 5"<br />
Thread 7/16" UNF<br />
Output 0.36 hp<br />
Length 4.3 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 82 dB(A)<br />
Weight 2.2 lb<br />
Air consumption 25.4 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 05<br />
www.pro-powertools.com 31
32<br />
<strong>PRO</strong> G2403<br />
Rotational speed 18 000 rpm<br />
Belt speed 1 300 rpm<br />
Belt dimension 10 x 330 mm<br />
Output 0.34 hp<br />
Length 11 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 85 dB(A)<br />
Weight 1.8 lb<br />
Air consumption 23.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0304 33<br />
SANDERS<br />
• Adjustable angle of arm • Air exhaust through handle.<br />
Accessories for sander G2402<br />
Abrasives G2403 G2404<br />
50 grid 4170 1199 00 4170 1201 00<br />
80 grid 4170 1196 00 4170 1197 00<br />
120 grid 4170 1200 00 4170 1202 00<br />
Accessories belt sanders<br />
Ordering No.<br />
5” pad with nut (G2402) 4210 3766 00<br />
Spanner for nut (G2402) 4210 3767 00<br />
www.pro-powertools.com<br />
<strong>PRO</strong> G2404<br />
Rotational speed 16 500 rpm<br />
Belt speed 2 540 rpm<br />
Belt dimension 20 x 520 mm<br />
Output 0.54 hp<br />
Length 14.2 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 85 dB(A)<br />
Weight 3.1 lb<br />
Air consumption 23.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0304 44
<strong>PRO</strong> G2406<br />
Speed 2 000 rpm<br />
Output 0.47 hp<br />
Support pad 5" - 8"<br />
Spindle thread 3/8"-24UNF<br />
Vibration level < 2.5 m/s2 Sound level 78 dB(A)<br />
Length 11.8 in<br />
Weight 3.1 lb<br />
Air consumption 21.2 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0304 88<br />
<strong>PRO</strong> G2301<br />
Speed 17 000 rpm<br />
Dia orbit 5/32”<br />
Pad size 3"<br />
Output 0.23 hp<br />
Length 4.6 in<br />
Vibration level 5.6 m/s 2<br />
Sound level 81 dB(A)<br />
Weight 3.1 lb<br />
Air consumption 18.9 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8”<br />
Ordering No. 8423 0312 10<br />
<strong>PRO</strong> G2401<br />
Speed 10 000 rpm<br />
Dia orbit 0.2 in<br />
Pad size 6"<br />
Thread 5/16"-24UNF<br />
Length 7 in<br />
Vibration level < 2.5 m/s 2<br />
Sound level 86 dB(A)<br />
Weight 4.4 lb<br />
Air consumption 16.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0324 43<br />
POLISHING SANDERS<br />
RANDOM ORBITAL SANDERS<br />
<strong>PRO</strong> G2407 / M14<br />
Speed 3 400 rpm<br />
Output 0.47 hp<br />
Support pad 5" - 8"<br />
Spindle thread 3/8"-24UNF<br />
Vibration level < 2.5 m/s2 Sound level 78 dB(A)<br />
Length 11.8 in<br />
Weight 3.1 lb<br />
Air consumption 21.2 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0304 77<br />
8423 0304 55 (M14)<br />
<strong>PRO</strong> G2301-KIT<br />
Complete set with 1 pcs each of 2” and 3”<br />
velcro sanding pad and 10 pcs each of<br />
320-400-600 grid sanding paper for 2” and 3”.<br />
Speed 17 000 rpm<br />
Dia orbit 5/32”<br />
Pad size 3"<br />
Output 0.23 hp<br />
Length 4.6 in<br />
Vibration level 5.6 m/s2 Sound level 81 dB(A)<br />
Weight 3.1 lb<br />
Air consumption 18.9 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 0312 11<br />
Accessories for G2401<br />
Type Ordering No.<br />
Spot suction kit 3780 4017 30<br />
Hose set for spot suction kit 3780 2724 40<br />
Support pad 4112 0680 00<br />
www.pro-powertools.com 33
34<br />
For perfect coarse and fine sanding results, choose<br />
a lubrication free <strong>PRO</strong> random orbital sander with<br />
3/32”, 3/16” or 3/8” in orbit. The G2438 series offers<br />
a variety of different versions. The I-version is<br />
<strong>PRO</strong> G2438<br />
<strong>PRO</strong> G2418<br />
Speed 9 025 rpm<br />
Dia orbit 3/8”<br />
Pad size 6 in<br />
Velcro pad 6 hole version<br />
Spindle thread 5/16"UNF<br />
Vibration level < 2.5 m/s 2<br />
Sound level 92 dB(A)<br />
Length 6.7 in<br />
Weight 3.3 lb<br />
Air consumption 19.1 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8423 1810 16<br />
RANDOM ORBITAL SANDERS<br />
www.pro-powertools.com<br />
a self suction tool and includes a dust bag, the Cversion<br />
is for central suction systems and the Nversion<br />
is without suction.<br />
<strong>PRO</strong> G2428<br />
Speed 9 025 rpm<br />
Dia orbit 3/8”<br />
Pad size 6” - 150 mm<br />
Velcro pad 6 hole version<br />
Spindle thread 5/16” UNF<br />
Vibration level < 2.5 m/s 2<br />
Sound level 92 dB(A)<br />
Length 11 2/16”<br />
Weight 3.3 lb<br />
Air consumption 19.1 cfm<br />
Air inlet thread 3/8” NPT<br />
Suitable air hose 3/8”<br />
Ordering No. 8423 2810 16<br />
G2438-6.3N G2438-6.3I G2438-6.3C G2438-6.5N G2438-6.5I G2438-6.5C<br />
Speed 12 000 rpm 12 000 rpm 12 000 rpm 12 000 rpm 12 000 rpm 12 000 rpm<br />
Output 0.21 hp 0.21 hp 0.21 hp 0.21 hp 0.21 hp 0.21 hp<br />
Dia orbit 3/32 3/32 3/32 3/16” 3/16” 3/16”<br />
Pad size 6" - 150 mm 6" - 150 mm 6" - 150 mm 6" - 150 mm 6" - 150 mm 6" - 150 mm<br />
Velcro pad No hole version 6 hole version 6 hole version no hole version 6 hole version 6 hole version<br />
Spindle thread 5/16"UNF 5/16"UNF 5/16"UNF 5/16"UNF 5/16"UNF 5/16"UNF<br />
Vibration level < 2.5 m/s 2 < 2.5 m/s 2 < 2.5 m/s 2 < 2.5 m/s 2 < 2.5 m/s 2 < 2.5 m/s 2<br />
Sound level 79 dB(A) 79 dB(A) 79 dB(A) 79 dB(A) 79 dB(A) 79 dB(A)<br />
Length / Weight 6.7 in / 2 lb 9.3 in / 2.2 lb 8.5 in / 2 lb 6.7 in / 2 lb 9.3 in / 2.2 lb 8.5 in / 2 lb<br />
Air consumption 19.1 cfm 19.1 cfm 19.1 cfm 19.1 cfm 19.1 cfm 19.1 cfm<br />
Air inlet thread 1/4" NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT 1/4” NPT<br />
Suitable air hose 3/8" 3/8” 3/8” 3/8” 3/8” 3/8”<br />
Ordering No. 8423 0313 10 8423 0313 20 8423 0313 30 8423 0313 05 8423 0313 15 8423 0313 25<br />
Accessories, pads<br />
Ordering No.<br />
Velcro 6 hole 4112 6103 16<br />
Vinyl 6 hole 4112 6105 06<br />
Velcro No hole 4112 6102 10<br />
Vinyl No hole 4112 6104 00
ACCESSORIES FOR G2406<br />
Accessories Ordering No.<br />
6” in Velcro pad, thread UNC 5/8”. Maximum speed 2 500 rpm. To 4112 6092 15<br />
be used together with Velcro sponge heads or Velcro lambswool<br />
bonnet.<br />
Lambswool bonnet 6” in with Velcro fitting.Maximum speed 2 500<br />
rpm.<br />
6” in Velcro sponge head, maximum speed 2 500 rpm, White,<br />
Dense, firm sponge head for compounding 2-pack paint systems.<br />
Excellent result with all leading makes of compound and polish.<br />
8” in Velcro sponge head, maximum speed 2 500 rpm, White,<br />
Dense, firm sponge head for compounding 2-pack paint systems.<br />
Excellent result with all leading makes of compound and polish.<br />
6” in Velcro sponge head, maximum speed 2 500 rpm, Blue Softer<br />
sponge, more open cell, for polishing and compounding of<br />
cellulose, acrylics etc.<br />
8” in Velcro sponge head, maximum speed 2 500 rpm, Blue Softer<br />
sponge, more open cell, for polishing and compounding of<br />
cellulose, acrylics etc.<br />
6” in Velcro sponge head, maximum speed 2 500 rpm, Pink Ultra<br />
soft, particularly good for dark colors.<br />
6” in Velcro sponge head, maximum speed 2 500 rpm, Yellow<br />
coarse sponge, open cell, for aggressive compounding including<br />
oxidized paintwork.<br />
ACCESSORIES FOR G2406 AND G2407<br />
6” in white sponge<br />
head pad, thread<br />
UNC 5/8”.<br />
Maximum speed<br />
4 000 rpm.<br />
Ordering No.<br />
4112 6100 15<br />
6” in blue sponge<br />
head pad, thread<br />
UNC 5/8”.<br />
Maximum speed<br />
4 000 rpm.<br />
Ordering No.<br />
4112 6101 15<br />
7” in soft plastic<br />
UNC 5/8” and<br />
spanner. Maximum<br />
speed<br />
8 000 rpm.<br />
Ordering No.<br />
4170 0756 80<br />
UNF 3/8”-24 x<br />
M14 Spindle<br />
thread adaptor. (To<br />
be used with M14<br />
threaded ads.)<br />
Ordering No.<br />
4021 0435 00<br />
Exhaust air hose<br />
Ordering No. 4150 1077 80<br />
4112 6093 15<br />
4112 6094 15<br />
4112 6095 20<br />
4112 6096 15<br />
4112 6097 20<br />
4112 6098 15<br />
4112 6099 15<br />
www.pro-powertools.com 35
36<br />
Built to endure, <strong>PRO</strong> percussive tools handle<br />
the toughest jobs with ease. Simple, rugged<br />
designs deliver powerful, efficient and dynamic<br />
Percussive Tools<br />
force. Light and compact, these tools put<br />
power into your hands to get the job done<br />
effortlessly.
Plate cutting chisel 16 175 3085 0215 00<br />
16 200 3085 0173<br />
Plate cutting chisel 14.5 175 3085 0226 01<br />
14.5 200 3085 0263<br />
Pipe cutting chisel 35 175 3085 0268 00<br />
20 200 3085 0302<br />
35 200 3085 0303<br />
Moil point chisel 13 200 3085 0297<br />
13 305 3085 0297<br />
Angle scraper chisel 30 175 3085 0264 00<br />
30 200 3085 0262<br />
35 165 3085 0362 00<br />
Spot weld chisel 17 175 3085 0270 00<br />
17 200 3085 0301<br />
Sharp chisel 15 175 3085 0216 00<br />
15 200 3085 0170<br />
15 300 3085 0170<br />
Flat chisel 16 175 3085 0265 00<br />
13 200 3085 0183<br />
15 155 3085 0230 01<br />
Chisel blank 13 175 3085 0212 00<br />
13 200 3085 0182<br />
13 350 3085 0182<br />
15 155 3085 0228 02<br />
Optional accessories for P2515A, P2525, P2526<br />
Chisel for Chisel for Chisel for<br />
CHISEL Width Length P2515A P2525 P2526<br />
Designation mm mm Ordering No. Ordering No. Ordering N<br />
P2526<br />
Retainer length 55 mm<br />
Ordering No. 3512 0046 00<br />
(Standard with P2526)<br />
P2525<br />
Retainer length 45 mm<br />
Ordering No. 3512 0027 01<br />
(Standard with P2525)<br />
P2525, P2526<br />
Retainer length 50 mm<br />
Ordering No. 3512 0045 00<br />
(Standard with P2525, P252<br />
Wide flat chisel 35 165 3085 0232 01<br />
<strong>PRO</strong> P2505 Engraving Pen<br />
Blows 190 Hz<br />
Vibration level 4.9 m/s2 Sound level 69 dB(A)<br />
Length 6.89 in<br />
Weight 0.26 lb<br />
Air consumption* 1.3 cfm<br />
Air inlet thread 1/8" NPT<br />
Suitable air hose 1/8"<br />
Ordering No. 8425 0102 72<br />
Optional accessories for<br />
WELD FLUX CHIPPERS & SCALERS<br />
<strong>PRO</strong> small weld flux chippers are ideal for applications such as light chipping, carving stone, scaling and<br />
removing paint, rust and, of course, weld flux. For the toughest jobs, the robust P2515A scaler does not<br />
disappoint. The needle scaler with 19 standard steel needles is perfect for removing welding slag, rust and<br />
paint from steel structures. With adjustable power, the P2505 engraving pen marks almost every surface<br />
and material, including glass, stone and metal, and comes with 1.8 meters of 3.2 mm PVC hose.<br />
<strong>PRO</strong> Weld flux chippers<br />
Model P2520 P2521<br />
Chisel shank 1/2” sq 1/2” sq<br />
Blows 90 Hz 60 Hz<br />
Piston stroke 5/8" 25/32"<br />
Vibration level 11.7 m/s 2 25.4 m/s 2<br />
Sound level 78 dB(A) 86 dB(A)<br />
Length 7.17 in 8.03 in<br />
Weight 2.2 lb 3.3 lb<br />
Air consumption 5.1 cfm 6.4 cfm<br />
Air inlet thread 1/4" NPT 1/4" NPT<br />
Suitable air hose 1/4" 1/4"<br />
Ordering No. 8425 0103 15 8425 0103 17<br />
<strong>PRO</strong> P2515A Scaler<br />
Chisel shank 1/2” sq<br />
Blows 66 Hz<br />
Piston stroke 0.98 in<br />
Vibration level 13 m/s2 Sound level 90 dB(A)<br />
Length 8.98 in<br />
Weight 4.2 lb<br />
Air consumption 5.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0103 59<br />
<strong>PRO</strong> P2516A Needle scaler<br />
Blows 66 Hz<br />
Piston stroke 0.98 in<br />
Vibration level 13 m/s2 Sound level 90 dB(A)<br />
Length 14.69 in<br />
Weight 5.7 lb<br />
Air consumption 5.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0103 67<br />
Optional accessories for P2505<br />
Needle and small parts kit 4081 0068 90<br />
Accessories for P2516A - needles<br />
Set of 19 needles Designation Length in Ordering No.<br />
Set of 19 needles Length<br />
Designation mm Ordering No.<br />
Steel standard 180 3512 0071 90<br />
Stainless steel, flat ends 180 3512 0072 90<br />
Berylium copper flat ends 180 3512 0073 90<br />
Steel standard 7” 3512 0071 90<br />
Stainless steel, flat ends 7” 3512 0072 90<br />
Berylium copper flat ends 7” 3512 0073 90<br />
Optional accessories for P2516A – Needles<br />
Accessories for P2505<br />
CHIPPING HAMMERS<br />
Ordering No.<br />
Needle and small parts kit 4081 0068 90<br />
www.pro-powertools.com 37
38<br />
<strong>PRO</strong> P2525<br />
Chisel shank 3/8" round<br />
Blows 50 Hz<br />
Piston stroke 2.3 in<br />
Vibration level 15 m/s 2<br />
Sound level 99 dB(A)<br />
Length 8.58 in<br />
Weight 3.7 lb<br />
Air consumption 17.6 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 02<br />
<strong>PRO</strong> P2530-R<br />
Chisel shank 3/8" round<br />
Riveting capacity 1/8” in aluminim<br />
3/32” steel<br />
Blows 60 Hz<br />
Piston stroke 1 1/2"<br />
Vibration level 16.1 m/s 2<br />
Sound level 96 dB(A)<br />
Length 5 1/2 in<br />
Weight 2.4 lb<br />
Air consumption 12.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 16<br />
<strong>PRO</strong> P2531-R<br />
Chisel shank 3/8" round<br />
Riveting capacity 1/4” aluminium<br />
3/16” steel<br />
Blows 50 Hz<br />
Piston stroke 1 3/4"<br />
Vibration level 16.1 m/s 2<br />
Sound level 96 dB(A)<br />
Length 7.6 in<br />
Weight 3.3 lb<br />
Air consumption 14.2 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 21<br />
CHIPPING HAMMERS<br />
www.pro-powertools.com<br />
<strong>PRO</strong> P2526<br />
Chisel shank 3/8" Hex<br />
Blows 55 Hz<br />
Piston stroke 2.6 in<br />
Vibration level 15 m/s 2<br />
Sound level 99 dB(A)<br />
Length 8.58 in<br />
Weight 3.7 lb<br />
Air consumption 17.6 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 10<br />
<strong>PRO</strong> P2530-H<br />
Chisel shank 3/8" hex<br />
Riveting capacity 1/8” aluminim<br />
3/32” steel<br />
Blows 60 Hz<br />
Piston stroke 1 1/2"<br />
Vibration level 16.1 m/s 2<br />
Sound level 96 dB(A)<br />
Length 5 1/2 in<br />
Weight 2.4 lb<br />
Air consumption 12.3 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 15<br />
<strong>PRO</strong> P2531-H<br />
Chisel shank 3/8" hex<br />
Riveting capacity 1/4” aluminium<br />
3/16” steel<br />
Blows 50 Hz<br />
Piston stroke 1 3/4"<br />
Vibration level 16.1 m/s 2<br />
Sound level 96 dB(A)<br />
Length 7.6 in<br />
Weight 3.3 lb<br />
Air consumption 14.2 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 20
<strong>PRO</strong> P2535-R<br />
Chisel shank 9/16" round<br />
Blows 50 Hz<br />
Piston stroke 1 3/4"<br />
Vibration level 32.6 m/s 2<br />
Sound level 103 dB(A)<br />
Length 10 12/16"<br />
Weight 5.5 lb<br />
Air consumption 14.8 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 31<br />
<strong>PRO</strong> P2536-R<br />
Chisel shank 11/16" round<br />
Blows 50 Hz<br />
Piston stroke 1"<br />
Vibration level 9.3 m/s 2<br />
Sound level 97 dB(A)<br />
Length 11 17/20 "<br />
Weight 11 lb<br />
Air consumption 21.2 cfm<br />
Air inlet thread 3/8" NPT<br />
Suitable air hose 1/2"<br />
Ordering No. 8425 0206 36<br />
<strong>PRO</strong> P2539-H<br />
Chisel shank 11/16" round<br />
Blows 28 Hz<br />
Piston stroke 4"<br />
Vibration level 19 m/s 2<br />
Sound level 102 dB(A)<br />
Length 16 3/4"<br />
Weight 15 lb<br />
Air consumption 22.9 cfm<br />
Air inlet thread 3/8" NPT<br />
Suitable air hose 1/2"<br />
Ordering No. 8425 0206 50<br />
CHIPPING HAMMERS<br />
Powerful and robust, <strong>PRO</strong> chipping hammers are designed for the toughest jobs in foundries,<br />
heavy industry and demolition.<br />
<strong>PRO</strong> P2535-H<br />
Chisel shank 9/16" round<br />
Blows 50 Hz<br />
Piston stroke 1 3/4"<br />
Vibration level 32.6 m/s 2<br />
Sound level 103 dB(A)<br />
Length 10 12/16"<br />
Weight 5.5 lb<br />
Air consumption 14.8 cfm<br />
Air inlet thread 1/4" NPT<br />
Suitable air hose 3/8"<br />
Ordering No. 8425 0206 30<br />
<strong>PRO</strong> P2536-H<br />
Chisel shank 11/16" hex<br />
Blows 50 Hz<br />
Piston stroke 1"<br />
Vibration level 9.3 m/s 2<br />
Sound level 97 dB(A)<br />
Length 11 17/20 "<br />
Weight 11 lb<br />
Air consumption 21.2 cfm<br />
Air inlet thread 3/8" NPT<br />
Suitable air hose 1/2"<br />
Ordering No. 8425 0206 35<br />
www.pro-powertools.com 39
40<br />
ACCESSORIES CHIPPING HAMMERS<br />
Designation Width Length For Tool Ordering No.<br />
Chisel blank 9/16” 6 3/32” P2515A 3085 0228 02<br />
1/2” 6 14/16” P2525 3085 0212 00<br />
1/2” 7 14/16” P2526 3085 0182 00<br />
1/2” 13 7/9” P2526 3085 0182 01<br />
Flat chisel 9/16” 153/16” P2515A 3085 0230 01<br />
10/16” 173/16” P2525 3085 0265 00<br />
1/2” 6 3/32” P2526 3085 0183 00<br />
Wide flat chisel 1 3/8” 6 1/2" P2515A 3085 0232 01<br />
Sharp chisel<br />
Sharp chisel 9/16” 6 14/16” P2525 3085 0216 00<br />
9/16” 7 14/16” P2526 3085 0170 00<br />
9/16” 11 4/5” P2526 3085 0170 01<br />
Spot weld chisel 2/3” 6 14/16” P2525 3085 0270 00<br />
2/3” 7 14/16” P2526 3085 0301 00<br />
Angle scraper chisel 1 3/16” 7 14/16” P2515A 3085 0362 00<br />
1 3/16” 6 14/16” P2525 3085 0264 00<br />
1 3/8” 6 1/2" P2526 3085 0262 00<br />
Moil point chisel 1/2" 7 14/16” P2526 3085 0297 00<br />
1/2" 12” P2526 3085 0297 01<br />
Pipe cutting chisel 1 3/8” 6 14/16” P2525 3085 0268 00<br />
3/4" 7 14/16” P2526 3085 0302 00<br />
1 3/8” 7 14/16” P2526 3085 0303 00<br />
Plate cutting chisel 4/7” 6 14/16” P2525 0385 0226 01<br />
4/7” 7 14/16” P2526 3085 0263 00<br />
Plate cutting chisel 10/16” 6 14/16” P2525 3085 0215 00<br />
10/16” 7 14/16” P2526 3085 0173 00<br />
www.pro-powertools.com
30˚<br />
15˚<br />
ACCESSORIES CHIPPING HAMMERS<br />
Designation Width Length For Tool Ordering No.<br />
Chisel blank 1/2” 6 3/32” P2520, P2521,<br />
P2522<br />
3085040000<br />
Chisel blank 1/2” 7 14/16” P2520, P2521,<br />
P2522<br />
3085040001<br />
Chisel blank 1/2” 9 27/32” P2520, P2521,<br />
P2522<br />
3085040002<br />
Flat chisel 9/16” 6 3/32” P2520, P2521,<br />
P2522<br />
3085040003<br />
Flat chisel 9/16” 7 14/16” P2520, P2521,<br />
P2522<br />
3085040004<br />
Flat chisel 9/16” 9 27/32” P2520, P2521,<br />
P2522<br />
3085040005<br />
Flux chisel 1 ” 6 3/32” P2520, P2521,<br />
P2522<br />
3085040006<br />
Flux chisel 1 ” 7 14/16” P2520, P2521,<br />
P2522<br />
3085040007<br />
Flux chisel 1 ” 9 27/32” P2520, P2521,<br />
P2522<br />
3085040008<br />
Plate cutting chisel 1/2" 8 3/16” P2530-R,<br />
P2531-R<br />
3085040009<br />
Plate cutting chisel 1/2" 8 3/16” P2530-H,<br />
P2531-H<br />
3085040010<br />
Double edge plate 3/4” 6 3/32” P2530-R, 3085040011<br />
cutting chisel<br />
P2531-R<br />
Double edge plate 3/4” 6 3/32” P2530-H, 3085040012<br />
cutting chisel<br />
P2531-H<br />
Flat chisel 3/4" 7” P2530-R,<br />
P2531-R<br />
3085040013<br />
Flat chisel 3/4" 7” P2530-H,<br />
P2531-H<br />
3085040014<br />
Point chisel 1/8” 7” P2530-R,<br />
P2531-R<br />
3085040015<br />
Point chisel 1/8” 7” P2530-H,<br />
P2531-H<br />
3085040016<br />
Rivet cutter 9/16” 5 29/32” P2530-R,<br />
P2531-R<br />
3085040017<br />
Rivet cutter 9/16” 5 29/32” P2530-H,<br />
P2531-H<br />
3085040018<br />
Chisel blank 1/2” 7 5/32” P2530-R,<br />
P2531-R<br />
3085040019<br />
Chisel blank 1/2” 7 5/32” P2530-H,<br />
P2531-H<br />
3085040020<br />
Spot weld chisel 3/4” 5 23/32 P2530-R,<br />
P2531-R<br />
3085040021<br />
Spot weld chisel 3/4” 5 23/32 P2530-H,<br />
P2531-H<br />
3085040022<br />
www.pro-powertools.com 41
42<br />
ACCESSORIES CHIPPING HAMMERS<br />
Designation Width Length For Tool Ordering No.<br />
Rivet snap 3<br />
3 1/2” P2530-R, 3085040023<br />
Rivet size 1/8”<br />
P2531-R<br />
Rivet snap 4<br />
3 1/2” P2530-R, 3085040024<br />
Rivet size 1/6”<br />
P2531-R<br />
Rivet snap 5<br />
3 1/2” P2530-R, 3085040025<br />
Rivet size 3/16”<br />
P2531-R<br />
Rivet snap 6<br />
3 1/2” P2530-R, 3085040026<br />
Rivet size 1/4”<br />
P2531-R<br />
Chisel blank 10/16” 9 27/32” P2535-R 3085040027<br />
Chisel blank 10/16” 11 4/5” P2535-R 3085040028<br />
Chisel blank 10/16” 9 27/32” P2535-H 3085040029<br />
Chisel blank 10/16” 11 4/5” P2535-H 3085040030<br />
Chisel blank 3/4" 9 27/32” P2536-R 3085040031<br />
Chisel blank 3/4" 11 4/5” P2536-R 3085040032<br />
Chisel blank 3/4" 9 27/32” P2536-H,<br />
P2539-H<br />
3085040033<br />
Chisel blank 3/4” 11 4/5” P2536-H,<br />
P2539-H<br />
3085040034<br />
Flat chisel 10/16” 7 14/16” P2535-R 3085040035<br />
Flat chisel 10/16” 7 14/16” P2535-H 3085040036<br />
Flat chisel 3/4” 9 27/32” P2536-R 3085040037<br />
Flat chisel 3/4” 9 27/32” P2536-H,<br />
P2539-H<br />
3085040038<br />
Point chisel 10/16” 7 14/16” P2535-R 3085040039<br />
Point chisel 10/16” 7 14/16” P2535-H 3085040040<br />
Point chisel 3/4” 9 27/32” P2536-R 3085040041<br />
Point chisel 3/4” 9 27/32” P2536-H,<br />
P2539-H<br />
3085040042<br />
Wide flat chisel 10/16” 7 14/16” P2535-R 3085040043<br />
Wide flat chisel 10/16” 7 14/16” P2535-H 3085040044<br />
Wide flat chisel 3/4” 9 27/32” P2536-R 3085040045<br />
Wide flat chisel 3/4” 9 27/32” P2536-H,<br />
P2539-H<br />
www.pro-powertools.com<br />
3085040046
uide<br />
bearing kit<br />
bearing kit<br />
bearing kit<br />
n kit<br />
n kit<br />
bearing kit<br />
bearing kit<br />
r kit, 3/8”<br />
kit<br />
kit<br />
r kit, 1/<br />
bearing kit<br />
r ball bearing kit<br />
bearing kit<br />
e and ball bearing kit<br />
d seal kit<br />
r bearing kit<br />
t<br />
r ball bearing kit<br />
<strong>PRO</strong> SPARE PARTS GUIDE<br />
IMPACT WRENCHES<br />
Ordering No. Tool Spare part<br />
4081 0211 90 W2210A Small parts kit<br />
4081 0212 90 W2210A Seal kit<br />
4081 0227 90 W2210A Vane and ball bearing kit<br />
4081 0211 90 W2211 Small parts kit<br />
4081 0212 90 W2211 Seal kit<br />
4081 0227 90 W 2211 Vane and ball bearing kit<br />
4081 0304 90 W2214XT Small parts kit<br />
4081 0305 90 W2214XT Seal kit<br />
4081 0306 90 W2214XT Vane and ball bearing kit<br />
4081 0307 90 W2214XT Flow regulation kit<br />
4081 0301 90 W2215XTC Small parts kit<br />
4081 0302 90 W2215XTC Seal kit<br />
4081 0303 90 W2215XTC Flow regulation kit<br />
4081 0157 90 W2219 Small parts kit<br />
4081 0158 90 W2219 Vane and ball bearing kit<br />
4081 0048 90 W2219 Seal kit<br />
4081 0159 90 W2225B Small parts kit<br />
4081 0049 90 W2225B Seal kit<br />
4081 0050 90 W2225B Vane and ball bearing kit<br />
4112 1412 90 W2310 Socket retainer kit, 3/8”<br />
4081 0342 90 W2310/W2311 Small parts kit<br />
4081 0343 90 W2310/W2311 Gasket kit<br />
4081 0344 90 W2310/W2311 Inlet parts kit<br />
4081 0345 90 W2310/W2311 Rotor vane kit<br />
4081 0346 90 W2310/W2311 Reverse switch kit<br />
4081 0347 90 W2310/W2311 Hammer cage kit<br />
4081 2036 90 W2311/W2315 Socket retainer kit, 1<br />
RATCHET WRENCHES<br />
4081 0051 90 W2200A/W2201A Small parts kit<br />
4081 0160 90 W2200A/W2201A Vane and ball bearing kit<br />
SCREWDRIVERS<br />
4081 0318 90 S2305/S2326 Small parts kit<br />
4081 0054 90 S2305/S2326 Vane and motor ball bearing kit<br />
4081 0163 90 S2308-C Vane and ball bearing kit<br />
4081 0319 90 S2308-C Small parts kit<br />
4081 0078 90 S2340-C/S2370-C Back head, vane and ball<br />
bearing kit<br />
4081 0270 90 S2340-C/S2370-C Small parts and seal kit<br />
DRILLS<br />
4081 0056 90 D2112/2116/2121 Small parts kit<br />
4081 0057 90 D21/G2406/07 Vane and motor bearing kit<br />
4081 0058 90 D2112/2116/2121 Ball bearing kit<br />
4081 0318 90 D2148-R Small parts kit<br />
4081 0054 90 D2148-R Vane and motor ball bearing kit<br />
www.pro-powertools.com 43
uide<br />
earing kit<br />
r ball bearing kit<br />
earing kit<br />
ring kit and seal kit<br />
earing kit<br />
parts kit<br />
earing kit<br />
earing kit<br />
earing kit<br />
all parts kit<br />
r ball bearing kit<br />
all parts kit<br />
44<br />
<strong>PRO</strong> SPARE PARTS GUIDE<br />
GRINDERS<br />
Ordering No. Tool Spare part<br />
4081 0165 90 G2412/G2422 Vane and ball bearing kit<br />
4081 0062 90 G2406/07/D2163 Ball bearing kit<br />
4081 0080 90 G2406/08/12/D2163 Small parts kit<br />
4081 0061 90 G2408 Vane and motor ball bearing kit<br />
4081 0063 90 G2408 Ball bearing kit<br />
4081 0265 90 G2409/G2414/G2424 Small part kit<br />
4081 0266 90 G2409/G2414/G2424 Seal kit<br />
4081 0267 90 G2409/G2414/G2424 Vane and ball bearing kit<br />
4081 0268 90 G2409 Driver kit<br />
4081 0269 90 G2409 Angle gear bearing kit and seal kit<br />
4081 0169 90 G2418/G2428 Small parts kit<br />
4081 0170 90 G2418/G2428 Vane and ball bearing kit<br />
4081 0064 90 G2401 Small parts kit<br />
4081 0065 90 G2401 Vane and small parts kit<br />
4081 0166 90 G2401 Ball bearing kit<br />
4081 0167 90 G2401 Seal kit<br />
4081 0186 90 G2402 Vane and ball bearing kit<br />
4081 0187 90 G2402 Small parts kit<br />
4081 0228 90 G2403 Small parts kit<br />
4081 0229 90 G2403 Seal kit<br />
4081 0230 90 G2403 Vane and ball bearing kit<br />
4081 0231 90 G2403 Apron kit<br />
4081 0232 90 G2404 Small parts kit<br />
4081 0229 90 G2404 Seal kit<br />
4081 0233 90 G2404 Vane and ball bearing kit<br />
4081 0234 90 G2404 Apron kit<br />
4081 0066 90 G2415/G2416 Small parts kit<br />
4081 0067 90 G2415/G2416 Strainer and small parts kit<br />
4081 0081 90 G2415/G2416 Vane and motor ball bearing kit<br />
4081 0320 90 G2438 Small parts kit<br />
4150 1657 90 G2510 Valve seat kit<br />
4150 1648 90 G2510 Exhaust kit<br />
4430 0525 91 G2510 Motor unit kit<br />
4150 1274 91 G2510 Gear wheel set<br />
4150 1659 90 G2510 Seal kit<br />
ENGRAVING PEN<br />
4081 0068 90 P2505 Needle and small parts kit<br />
CHIPPING HAMMERS<br />
4081 0052 90 P2515A/P2516A Small parts kit<br />
4081 0059 90 P2525/P2526 Small parts kit<br />
www.pro-powertools.com
a<br />
Impact wrenches<br />
Fig. 1<br />
Fig. 2<br />
c<br />
c<br />
a<br />
a<br />
Ratchet wrenches c<br />
a<br />
a<br />
a<br />
c<br />
Ø Ø c c<br />
Ø c<br />
c<br />
b<br />
Screwdrivers<br />
c<br />
a<br />
a<br />
b<br />
b<br />
d<br />
ad<br />
b<br />
d b<br />
Ø c d<br />
Fig. 1<br />
b<br />
Fig. 1<br />
Fig. 2<br />
a<br />
a<br />
a<br />
a<br />
c<br />
c b<br />
e<br />
b<br />
d<br />
Ø a<br />
b<br />
b<br />
b<br />
b<br />
Ø c<br />
b<br />
b<br />
c<br />
c<br />
d<br />
db<br />
b<br />
a<br />
a<br />
d<br />
b<br />
a<br />
Model / (mm) Fig. 1 a b c d<br />
W2310 Ø c 60 175 160 d 56<br />
W2311 Ø c 60 175 160 d 56<br />
W2315 70 180 190 64<br />
W2320 90 220 235 64<br />
W2315 XP<br />
W2320 XP<br />
W2110 HEX<br />
Ø c<br />
70<br />
b<br />
90b a<br />
-a 180<br />
220<br />
-<br />
190<br />
235<br />
160<br />
d<br />
64<br />
64<br />
-<br />
W2111 3/8” - - 154 -<br />
W2210A 3/8” 78 180 160 57<br />
W2211 1/2” 78 180 160 57<br />
W2214 d XT 1/2” Comp 95<br />
b<br />
200 200 60<br />
cW2215<br />
XTC 1/2” 90a 190 190 65<br />
W2219 3/4” - 235 255 82<br />
Model / (mm) Fig. 2 a b c d<br />
W2220 3/4” 270 244 92 66<br />
W2225C 1” 290 270 133 66<br />
W2226C 1” 270 244 a 92 66<br />
Model / (mm) Fig. 1 a b c<br />
W2300 3/8”<br />
W2301 1/2”<br />
W2303 3/8”<br />
b<br />
a 58<br />
58<br />
48<br />
258<br />
d<br />
258<br />
c<br />
195<br />
b<br />
108<br />
108<br />
65<br />
W2302 c1/4”<br />
W2200A 3/8”<br />
48<br />
58<br />
195 65<br />
Ø c<br />
258 108<br />
W2201A 1/2” 58 258 108<br />
a<br />
Model / (mm) Fig. 1 a b c d<br />
S2480 132 108 40 166<br />
e<br />
S2481 143 119 42 166<br />
d<br />
S2305 198 85 40 135<br />
b<br />
S2326 178 85 40 135<br />
S2308-C Slip Clutch 225 85 40 135<br />
Ø a<br />
S2450-P Shut off 225 85 40 c 135<br />
Model / (mm) Fig. 2 a b c<br />
S2340-C Slip clutch 62 250 38<br />
S2370-C Slip clutch 62 250 38<br />
S2416-L Shut off 62 230 38<br />
S2426-L Shut off 61 230 38<br />
Dimensional Drawings<br />
Ø c b<br />
d<br />
e<br />
d<br />
a<br />
Ø a<br />
a<br />
Drills<br />
b<br />
a<br />
b b<br />
a<br />
d<br />
c<br />
db<br />
c<br />
c<br />
c<br />
d<br />
Model / (mm) Fig. 1 a b c d<br />
D2163 242 50 110 128<br />
Model / Ø (mm) c Fig. 2 a bb c d<br />
D2121 248 152 40 170<br />
D2148-R reversible 248 152 40 170<br />
D2121Q 248 152 40 170<br />
D2148-RQ<br />
a<br />
248 152 40 170<br />
Model / (mm) Fig. 3 a b c<br />
D2112 206 135 40<br />
D2116 211 135 40<br />
D2112Q 206 135 40<br />
D2116Q 211 135 40<br />
a<br />
Fig. 3<br />
Ø c<br />
b<br />
Ø c<br />
b<br />
Ø c<br />
d<br />
b<br />
Angle grinders & vertical grinders<br />
e<br />
Fig. d 1<br />
Ø c<br />
b<br />
b<br />
e<br />
a<br />
d<br />
Fig. 1<br />
d<br />
Fig. 2<br />
Ø a<br />
Ø a<br />
b<br />
a<br />
b<br />
Ø c<br />
b<br />
Fig. 2<br />
d<br />
c<br />
c<br />
a<br />
Model / (mm) Fig. 1 ab b c d e<br />
G2408-100 114 225 40 30 128<br />
G2408-115<br />
c a<br />
G2408-125<br />
b<br />
126 225<br />
138Ø c225<br />
40<br />
40<br />
30<br />
30<br />
128<br />
128<br />
G2409-100 114 c 260 50 30 144<br />
b<br />
G2409-115 126 260 50 30 144<br />
d Ø c<br />
G2409-125 138<br />
d<br />
260 50 30 144<br />
G2409-100-M14 114 260 50 30 144<br />
G2409-115-M14 d 126 260 50 30 144<br />
G2409-125-M14 138 260 50 30 144<br />
G2510-115 126 207 47 30 126<br />
G2510-125 134 207 47 30 126<br />
Model / (mm) Fig. 2 a b c d<br />
G2415 198 280 190 268<br />
G2416 198 280 190 268<br />
www.pro-powertools.com 45<br />
a<br />
a<br />
a<br />
a<br />
a
a<br />
e<br />
a<br />
46<br />
Die grinders<br />
Sanders<br />
Ø d<br />
c<br />
Polishing sanders d<br />
Fig. 1<br />
Fig. 1<br />
a<br />
b<br />
a<br />
c<br />
Ø b<br />
c<br />
Ø b<br />
c<br />
b<br />
a<br />
a<br />
Model / (mm) Fig. 1 a b c<br />
G2412-1 178 44 71<br />
G2412-2 178<br />
a<br />
44 71<br />
G2414 S080 215 48 71<br />
G2414 S150 215 48 71<br />
G2414 S200 215 48 71<br />
G2414 S250 Ø b 215<br />
c<br />
48 71<br />
Model / (mm) Fig. 2 a b c<br />
G2422-1 277 44 71<br />
G2422-2 277 44 71<br />
G2424-S080 315 48 71<br />
G2424-S120 b<br />
315 48 71<br />
e f<br />
G2424-S150 315 48 71<br />
G2424-S200 315 48 71<br />
G2424-S250 315 48 71<br />
Model / (mm) Fig. 1 a b c<br />
G2302 130 109 35<br />
G2402<br />
f<br />
155 124 45<br />
G2502 172 108 50<br />
Model / (mm) Fig. 2 a b c d<br />
G2403 80 140 280 70<br />
c<br />
G2404 100 145 360 90<br />
Model<br />
Ø d<br />
/ (mm) Fig. 1 a b c d e f<br />
b<br />
Fig. 1<br />
Fig. 2<br />
Ø d<br />
f<br />
a<br />
b<br />
Fig. 2<br />
a<br />
Ø b<br />
c<br />
c<br />
a<br />
G2406 135 120 50 150 300 215<br />
d<br />
G2407 135 120 50 150 300 215<br />
a<br />
a<br />
Ø d<br />
a<br />
a<br />
e<br />
Ø d<br />
a<br />
b<br />
e<br />
c<br />
b<br />
c<br />
c<br />
b<br />
c<br />
Ø b<br />
c<br />
c<br />
d<br />
Ø b<br />
c<br />
b<br />
Ø d<br />
d<br />
a<br />
f<br />
c<br />
b<br />
e<br />
f<br />
Ø b<br />
DIMENSIONAL DRAWINGS<br />
a<br />
c<br />
d<br />
e<br />
b<br />
f<br />
d<br />
a<br />
a<br />
www.pro-powertools.com<br />
Random orbital sanders<br />
Fig. 1<br />
Model / (mm) Fig. 1 a b c b e f<br />
a<br />
G2401 180 155 85 150 42 73<br />
a<br />
Model / (mm) Fig.2 a b c<br />
G2301 130 117 35<br />
b<br />
a<br />
b<br />
c<br />
Ø b<br />
d<br />
Model / (mm) Fig. 3c a b c d<br />
e<br />
Ø d<br />
Ø d<br />
c<br />
G2428 282 100 29 100<br />
Model / (mm) Fig. 4 a b c d<br />
G2418 170 100 100 29<br />
f<br />
G2438-N 170 150 105 29<br />
G2438-L 235 150 105 29<br />
G2438-C 230 150 105 29<br />
Percussive tools<br />
Fig. 1<br />
Fig. 2<br />
a<br />
Ø d<br />
a<br />
Fig. 3<br />
e<br />
c<br />
b<br />
a<br />
a<br />
a<br />
a<br />
b<br />
c<br />
c<br />
Ø b<br />
c<br />
a<br />
b<br />
d<br />
f<br />
a<br />
b<br />
b<br />
b<br />
b<br />
c<br />
Ø d<br />
Ø b<br />
c<br />
b<br />
Fig. 4<br />
a<br />
b<br />
e<br />
f<br />
c<br />
c<br />
a<br />
Model / (mm) Fig. 1 a<br />
b<br />
P2520 f 182 36<br />
P2521 204 44<br />
e<br />
d<br />
f<br />
Ø b<br />
d<br />
f<br />
c<br />
a<br />
b<br />
Fig. 2<br />
Model / (mm) Fig. 2 a b<br />
P2515 228 58<br />
P2516 373 58<br />
a<br />
d<br />
Ø b<br />
d<br />
b<br />
b<br />
c
Model / (mm) Fig. 3 a b<br />
P2525 218 154<br />
P2526 218 b 154<br />
P2530-H 140 146<br />
P2530-R a<br />
140 146<br />
P2531-H 206 146<br />
P2531-R 206 146<br />
a<br />
Fig. 4<br />
a<br />
b<br />
c<br />
Fig. 3<br />
Model / (mm) Fig. 4 a b c<br />
P2535-H b<br />
281 23 142<br />
P2535-R 281 23 142<br />
P2536-H 343.5 46 158<br />
P2536-R 343.5 46 158<br />
P2539-H 467.5 46 158<br />
Model / (mm) Fig. 5 a b<br />
P2505 175 19<br />
Fig. 5<br />
a<br />
f<br />
a<br />
DIMENSIONAL DRAWINGS<br />
b<br />
CONVERSION TABLE<br />
LENGTH PRESSURE<br />
b<br />
1 in = 0.0254 m 1 bar = 100 kPa<br />
1 m = 39.3701 in 1 kp/cm2 (at) = 98.0665 kPa<br />
3.2808 ft 1 psi = 6.8948 kPa<br />
1 mm =<br />
WEIGHT<br />
0.0393701 in 1 kPa = 0.0101972<br />
kp/cm2 (at)<br />
1 lb = 0.4536 kg <strong>POWER</strong><br />
1 kg = 2.2046 lb 1 kpm/s = 9.8067 W<br />
1 hp = 745.7 W<br />
TORQUE 101.972 kpm/s<br />
1 kpm = 9.8067 Nm 1 kW = 1.3410 hp<br />
1 Ft lb = 1.3558 Nm<br />
FLOW<br />
TORQUE 1 m3/min = 16.6667 l/s<br />
1 In lb = 0.1130 Nm 1 cfm = 0.4720 l/s<br />
1 Nm = 0.1020 kpm 1 m3/h = 0.2778 l/s<br />
0.7376 ft lb 1 l/s = 2.1189 cfm<br />
a<br />
b<br />
c<br />
www.pro-powertools.com 47
www.pro-powertools.com<br />
<strong>PRO</strong> industrial tools deliver unequaled quality, performance and durability.<br />
<strong>PRO</strong> is widely recognized around the world as the natural choice for professional-grade tools.<br />
9833 8464 21 <strong>2008</strong>:1 Printed in Sweden enteradvertising.se