Balinit

You conserve resources and
spend less on consumables
Using BALINIT ® coatings, Renault tripled the life of
a clutch fork forming tool and dramatically reduced
lubricant consumption.
Sheet metal forming
06
Oil consumption per month [litres]
8,000
7,000
6,000
5,000
300
200
100
0
7,000
uncoated
50
BALINIT ®
BALINIT ® -coated tools are environmentally
friendly: because they will run
with smaller amounts of less problematic
lubricants and help conserve
resources.
Ecology factor:
lubricant metering
BALINIT ® assures the reliable separation
of workpiece and tool. Even
under adverse lubrication conditions,
the result is a safe and defined set of
operating parameters. The options for
environmentally friendlier production
range from smaller lubricant quantities
to dry production.
Ecology factor: lubricant choice
When BALINIT ® -coated tools are
deployed, you can work with ecologically
safer lubricants. This not only
reduces the effort and cost involved
in reconditioning but also makes your
eco-balance look good.
Ecology factor: resources
BALINIT ® boosts the life of your tools
by several orders of magnitude. At
the same time, less scrap is produced
with coated tools. This sustainably cuts
consumption of valuable resources.