Balinit

You save even more in production
With its positive coating properties
and the high coating quality, BALINIT ®
boosts productivity in punching and
forming.
Productivity factor: service life
The extreme hardness of the BALINIT ®
coating effectively protects tools
against abrasive wear and prevents
dimensional changes of the functional
surfaces. Moreover, coated punches
can be reground more frequently due
to less flank wear and are therefore
reusable for a longer period
of time.
Productivity factor:
cycle frequencies
BALINIT ® -coated tools are more resistant
to wear and cold welding. Users
benefit from these coating properties
and operate their machines at higher
stroke rates. The result: improved yield,
greater productivity.
Productivity factor:
capacity utilisation
Tools have a decisive impact on the
economics of punching and forming.
BALINIT ® increases performance and
production safety and thus reduces
the downtime of manufacturing equipment.
04
Productivity factor:
forming process
The high wear resistance and good
sliding properties of BALINIT ® coatings
have a beneficial effect on the forming
process. Further advantages: higher
dimensional accuracy across a longer
tool life, fewer drawing stages, readyto-install
workpieces with minimal
subsequent machining.
Punching
Parts produced [1,000 units]
200
160
120
80
40
0
TiN
BALINIT ®
ALCRONA
Tool: Carbide piercing punch, Ø 3.6 mm
Workpiece: DIN 1.0213 (C8C)
Process: Piercing of through hole
with lubrication
Advantage: Up to 300 % longer tool life,
thus lower unit costs
Source: SFS Intec AG
Heerbrugg (Switzerland)