For inspection purposes only. Consent of copyright owner required ...

system can be thoroughly electrically spark-tested once
installed. And for exposed applications, the clean conductive
geomembrane can be spark-tested periodically as part
of a maintenance program to ensure that no post-installa-
GSE tion STANDARD damage PRODUCTS has occurred. GSE Conductive geo membranes
offer a level of assurance not possible with other
tank lining products. See the GSE Conductive application
sheet for more information.
LEAK DETECTION
GSE HDPE geomembrane liners are typically utilized for
leak detection systems inside the ringwall or retrofit. The
liner contains and channels leaked liquids to a leak detection
sump.
A GSE drainage geocomposite, placed directly on top
of the geomembrane, is typically used to facilitate rapid
drainage of any leaked liquid.
SECONDARY CONTAINMENT
From small tanks to entire tank farms, the secondary containment
area is a critical component of tank lining protection.
GSE geomembranes have been proven in hundreds of
secondary containment applications. GSE’s trained installation
technicians have extensive experience working with
pre-existing and complicated piping systems.
GSE HDPE geomembrane used in a process tank.
CORROSION PROTECTION
GSE HDPE geomembrane lining systems are routinely utilized
to provide corrosion protection for concrete and steel
surfaces. GSE offers two methods for corrosion-proofing.
The first method involves attaching standard geomembrane
sheeting to the concrete surface using batten strips or the
www.gseworld.com
PolyLock concrete embedment strip.
The second method is to use GSE StudLiner concrete
protective liner systems. GSE StudLiner sheeting incorporates
extruded studs on one side which are embedded into
new concrete or attached using an injected mortar. The
StudLiner sheet locks into the concrete and provides a tight,
smooth, rigid surface. See the GSE StudLiner application
sheet for more information.
GSE HDPE geomembrane in a ringwall.
ADDITIONAL INFORMATION
If you have an upcoming project, please give us a call. We
will provide you with recommendations, an estimate for
material and installation, and contacts for a GSE approved
installer.
For inspection purposes only.
Consent of copyright owner required for any other use.
AP003 Tank R03/16/06
This information is provided for reference purposes only and is not intended as a warranty or guarantee. GSE assumes no liability in connection with the use of this information. Please check with
GSE for current, standard minimum quality assurance procedures and specifications.
GSE and other trademarks in this document are registered trademarks of GSE Lining Technology, Inc. in the United States and certain foreign countries.
North America GSE Lining Technology, Inc. Houston, Texas 800 435 2008 281 443 8564 Fax: 281 230 8650
South America GSE Lining Technology Chile S.A. Santiago, Chile 56 2 595 4200 Fax: 56 2 595 4290
Asia Pacific GSE Lining Technology Company Limited Bangkok, Thailand 66 2 937 0091 Fax: 66 2 937 0097
Europe & Africa GSE Lining Technology GmbH Hamburg, Germany 49 40 767420 Fax: 49 40 7674234
Middle East GSE Lining Technology-Egypt The 6th of October City, Egypt 202 2 828 8888 Fax: 202 2 828 8889
EPA Export 24-08-2012:23:55:50