For inspection purposes only. Consent of copyright owner required ...

More documents

Recommendations

Info

tainment. To meet this requirement, GSE UltraFlex is made from a unique, linear low density polyethylene resin (LLDPE). Its utility and durability has been proven in over 50 million square feet (5 million square meters) of landfill GSE cover STANDARD applications. PRODUCTS LEACHATE PONDS Leachate is collected from landfill cells and typically stored in lined ponds for treatment or evaporation. The liners in these ponds are generally exposed to the elements. HDPE lining systems exhibit the highest degree of durability under extreme environmental conditions including sunlight, freezing and abrasion. Typical landfill cap using GSE HDPE geomembrane in Florida. HIGH-END ENGINEERING To achieve true state-of-the-art landfill design, incorporate GSE’s coextruded geomembrane capabilities. GSE White is a patented, coextruded HDPE geomembrane, which provides significant benefits for the landfill owner, engineer and contractor. The white surface has two primary functions. First, it reflects sunlight which minimizes radiant heat absorption and heat buildup to effectively minimize liner temperature. This results in less expansion of the liner. With less expansion, wrinkles are minimized. Another benefit of lower liner temperature is decreased moisture evaporation from underlaying clay layers. The second benefit of a white surface is improved visual inspection. if the thin white surface is damaged, the black portion of the sheet shows clearly. Post-installation damage is much more likely to be observed and repaired. See the GSE White information sheet for more information. If a post-installation leak test is required, consider the benefits of GSE’s patented, spark-testable GSE Conductive. This information is provided for reference purposes only and is not intended as a warranty or guarantee. GSE assumes no liability in connection with the use of this information. Please check with GSE for current, standard minimum quality assurance procedures and specifications. GSE and other trademarks in this document are registered trademarks of GSE Lining Technology, Inc. in the United States and certain foreign countries. North America GSE Lining Technology, Inc. Houston, Texas 800 435 2008 281 443 8564 Fax: 281 230 8650 South America GSE Lining Technology Chile S.A. Santiago, Chile 56 2 595 4200 Fax: 56 2 595 4290 Asia Pacific GSE Lining Technology Company Limited Bangkok, Thailand 66 2 937 0091 Fax: 66 2 937 0097 Europe & Africa GSE Lining Technology GmbH Hamburg, Germany 49 40 767420 Fax: 49 40 7674234 Middle East GSE Lining Technology-Egypt The 6th of October City, Egypt 202 2 828 8888 Fax: 202 2 828 8889 www.gseworld.com A large landfill installation can be tested for pinholes or other construction-related damage to 100% satisfaction without the added expense of flooding or the uncertainties of other leak testing methods. Specialized areas such as sumps and pipe penetrations require special products and installation techniques. To ensure complete containment protection, use GSE Conductive since it can be electrically spark-tested at any time to find even the smallest punctures resulting from pipe laying or other incidental damage. A double lined, multi-cell landfill. ADDITIONAL INFORMATION If you have an upcoming project, please give us a call. We will provide you with recommendations, an estimate for material and installation, and contacts for a GSE approved installer. For inspection purposes only. Consent of copyright owner required for any other use. AP001 Landfill R03/16/06 EPA Export 24-08-2012:23:55:49
GSE HD GSE HD is a high quality, high-density polyethylene (HDPE) geomembrane produced from a specially formulated, proprietary virgin polyethylene resin designed specifically for flexible geomembrane applications. GSE HD has outstanding chemical resistance, mechanical properties, environmental stress crack resistance, dimensional stability and thermal ageing characteristics. GSE HD also has excellent resistance to UV radiation and is suitable for exposed conditions. Product Specifications Tested Property Test Method Minimum Values (1) Thickness (mm) (2) ASTM D 5199 0.75 1.0 1.5 2.0 2.5 Density g/cm³ ASTM D 792/1505A 0.94 0.94 0.94 0.94 0.94 Tensile Properties (each ASTM D 6693, Type IV direction) Speed 50 mm pm Strength at Break (N/mm) 20 27 40 53 67 Strength at Yield (N/mm) 11 15 22 29 37 Elongation at Break, % G.L. (50 mm) 700 700 700 700 700 Elongation at Yield, % G.L. (33 mm) 12 12 12 12 12 Tear Resistance (N) ASTM D 1004 93 125 187 249 311 Puncture Resistance (N) ASTM D 4833 240 320 480 640 800 Carbon Black Content % ASTM D 1603 2.0 2.0 2.0 2.0 2.0 Carbon Black Dispersion ASTM D 5596 (3) (3) (3) (3) (3) Environmental Stress Crack ASTM D 5397 300 300 300 300 300 Resistance, hr Appendix Reference Property Test Method Nominal Values Melt Flow Index, g/10 minutes Dimensional Stability (each direction). % Oxidative induction time, Minutes (Standard OIT) Oxidative induction time, Minutes (HP OIT) Oven Aging, 85ºC, 90 days/ Standard OIT, % retained UV exposure 1,600 hrs/ HP OIT, % retained (4) ASTM D 1238. Cond. 190°C/2.16 kg ASTM D 1204, 100ºC, 1 hour ASTM D 3895, 200 o C, pure O2, 1atm ASTM D 5885, 150ºC, pure O2, 500 psig ASTM D 5721/ For inspection purposes only. Consent of copyright owner required for any other use. ASTM D 3895 GRI-GM 11/ ASTM D 5885
Page 1 and 2: For inspection purposes only. Conse
Page 3 and 4: Storage Systems Portasilo® M-Type
Page 5 and 6: BRIDGEMONT BMS For inspection purpo
Page 7 and 8: Weigh Bars ® Braided stainless ste
Page 9 and 10: The newforce BridgeMont’s innovat
Page 11 and 12: WESLEY Wheel Wash : Specification W
Page 13 and 14: Pump House Fitted With • 24 volt
Page 15 and 16: Datasheet: P1 Data GB01 Notes Compo
Page 17 and 18: Datasheet: D1 Data GB05 Water Flow
Page 19 and 20: Application Sheet system to avoid a
Page 21: GSE STANDARD PRODUCTS GEOMEMBRANE Q
Page 25 and 26: system can be thoroughly electrical
Page 27 and 28: Contents 3 Introduction 6 Factors a
Page 29 and 30: Landfill cells of any shape and siz
Page 31 and 32: Four (DAC) cores of approximately 9
Page 33 and 34: Stability on Slopes 13 Key Points D
Page 35 and 36: Robustness In terms of relative rob
Page 37 and 38: Cost DAC has been used as an imperm
Page 39 and 40: Walo UK Limited is a division of th
Page 43 and 44: SuDS Site Evaluation Site Name: MEH
Page 45 and 46: The Use of SuDS for Infiltration Th
Page 47 and 48: 100 Year incl. 10%CC 81 m³ Filter
Page 49 and 50: Qbar (2.3 Year) 3,786 m³ Rainfall
Page 51 and 52: Total PRELIMINARY - SURFACE WATER S
Page 53 and 54: Pipe Run Area Imperm. Imperm. Area
Page 55 and 56: POLLUTANT REMOVAL �Ideally sedime
Page 59 and 60: DETENTION BASINS S I T E CONTROL Vo
Page 61 and 62: STORMWATER WETLANDS REGIONAL CONTRO
Page 63 and 64: OIL INTERCEPTORS Example of an Oil
Page 65 and 66: CARLOW PRECAST Concrete Engineering
Page 67 and 68: Application Bypass separators are u
Page 69 and 70: Washdown & Silt Trap Range Applicat
Page 73 and 74:
Type of Plant Carlow Precast Tanks
Page 75 and 76:
Operator Control Daily control Carl
Page 77 and 78:
Carlow Precast Tanks Domestic Waste
Page 79 and 80:
Carlow Precast Tanks Domestic Waste
Page 81 and 82:
Part One / Certification 1 1.1 ASSE
Page 83 and 84:
Table 1: CPT Zons® AQUAstar® Syst
Page 85 and 86:
Fig 1: CPT Zons® AQUAstar® System
Page 87 and 88:
2.4 INSTALLATION 2.4.1 General A
Page 89 and 90:
is required, the end user shall arr
Page 91 and 92:
e left off an unattended tank. Wast
Page 93 and 94:
For inspection purposes only. Conse
Page 95 and 96:
��
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Appendix D.3.1: Comparison of Hazar
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Photo 3 Lining of a side slope with
Page 129 and 130:
Appendix D.3.3: DAC Reference Sites
Page 131 and 132:
Page 133:
show all

For inspection purposes only. Consent of copyright owner required ...

Create successful ePaper yourself

Delete template?

Save as template?