syllabi 10+1 voc streams - Government Senior Secondary School ...

88
b) Placing, marking, cutting and handling of various type of materials.
c) Selection of trimmings, supporting fabric (lining, interlining) and fastner.
5. Disposal of fullness - Pleats-Knife, Box, Laverted; Darts, Tucks, Pin shells, Gathers, Smocking,
Shirring, Frills and Ruftle.
6. Plackets - One piece and two piece placket opening.
7. Fastners- Press buttons, 'Hooks and eyes, Eyelets buckles, Button, Button holes, Zippers and
Velero tape.
8. Edge Finishes - Facing and Binding both biased and shaped.
CLOTHING CONSTRUCTION
Paper-III PRACTICAL
Time : 3 hrs. Marks : 25
Semester-I
1. Identification and maintenance of tools and equipment of dress making.
2. Sewing machine -
a) Types, main parts, operation and care.
b) Main adjustments while operating sewing machine.
c) Special attachments and their use.
d) Minor defects and rectification.
3. Selection and use of different threads and needles for various fabrics.
4. Making samples of -
a) Basic stitches.
b) Decorative stitches.
c) Seams.
d) Disposal of fullness.
e) Fastners.
f) Edge Finishes
Time: 3 hrs Semester-II M. Marks : 50
1. Drafting of basic bodice blocks for children and women.
2. Adapting the basic blocks for making the following garments;
a) Children - Frock & Shorts.
b) Women - Petticoat, Saree Blouse, Salwar Kameez.
3. Estimation of the fabric and accessories on the basis of body measurements.
4. Fitting, finishing, Ironing and folding of the above garments.
5. Files (a) Sample file, (b) Drafting and adaptation file.
All practicals to be recorded in file along with procedures, analysis and samples.
(iii) TEXTILE CRAFT (WEAVING)
Paper-I TEXTILE SCIENCE
SAME AS GIVEN UNDER
COMMERCIAL GARMENT DESIGNING AND MAKING
YARN PREPARATION AND FABRIC STRUCTURE
Paper-II THEORY
Time : 2 hrs. Marks : 30
Int. Ass./CCE: 10
Total Marks: 40
Semester-I
1. Spinning & its types -
a) Mechanical - spinning of cotton, wool and worsted.
b) Chemical - Melt, Dry & wet spinning.
2. Terminology related to fabrication - fabric, Warp, Weft Woof, Weave, repeat pattern, design, draft
plan, peg plan, selvedge (Plain, Tape, Split, Fused, Ieno, Tucked), texture motif and picks.
3. Introduction to yarn preparation, winding, wraping - Definition & different methods of warping,
warping calculations (no. of ends/inch, no. of picks/ inch/no. of bobbins, no. of sections, width
of sections, length of warp on bobbins, total length of yarn, weight of yarn, width of cloth
including selvedge), sizing beaming, looming, yarn count, reed count and count of folded yarn.