Duty Exemption Scheme

7 Refractory comprising of : 15 kg
a) Zirconia/ magnesia nozzles
b) Aluminium-graphite nozzles/
monoblock stoppers/ stopper
heads/ stopper rods/ shrouds
c) Porous plugs/ seat blocks/
sleeves/ slide gate plates
d) Direct bonded basic bricks
e) EBT Tubes/ mass/ bricks
f) Monolithic/ gunning/ ramming
mass/ castables
g) Dolomite/ magnesia carbon
bricks
8 Other ferro alloy(s) (Including
charge/ ferro nickel/ charge
chrome etc ) provided the
alloying element(s) is/are
actually present in the export
product
9 Casting powder 2 kgs
10 Saw/ shear blade 0.01 kg
11 Copper scrap/ Copper
Cathode/Copper Wire
Bar/Copper Rods (if copper is
actually present in the steel)
0.04 kg
12 Furnace oil (For captive power
plant only)
70 kgs
13 Furnace oil for oil fired reheating 50 kgs
furnace in the rolling mill
14 Furnace oil for ladle heating 6 kgs
15 Lubricant (for captive power
plant)
0.65 kgs
16 Low silica lime stone 100 kgs
17 Cored wire/ scrap/ ingots of
aluminium
1 kg
18 Cored wire of lead/ lead shots (in 2.5 kgs
case of export of lead bearing
free cutting steel only)
19 Raw petroleum coke 5 kgs
20 Ceramic coated lancing pipe 1 No
21 Temperature tips 0.50 No.
22 Sampler tips 0.25 No.
23 a) Dry drawing lubricant/ coating 8 kgs
b) Wire drawing soap 7 kgs
c) Tungsten carbide dies 5 No
d) Wet drawing lubricant/ coating 4 kgs
e) Plastic bobbins/ spools 300 Nos
C86
Qty of each ferro
alloy in kg as in
formula (iv) of note 4
Note: 1. The above norms is applicable only if the export product(s) is manufactured through electric arc
furnace route/ induction furnace route using steel scrap as basic raw material.
2. Value of consumable item at Sl.No 2, 4, 5,7 (a to g) 9,19,20,21,22,23 (a to e) shall not excced 25% of the
total CIF value of the licence.
3. In case the product(s) is manufactured through induction furnace route, the item at Sl.No.(2) will not be