Duty Exemption Scheme

a) Porous Plugs/Seat
Blocks/Sleeves/Slide Gate plates
b)Direct Bonded Basic Bricks
c)
Monolithic/Gunning/Ramming/C
astables
d) Dolomite/Magnesia Carbon
Bricks
vi) Industrial X-Ray Film
(Various Grades for Gamma
Rays Iridium 192 & Cobalt 60)
9440 Sq. Cm.
4 Furnace Oil/Diesel Oil for:
i) Ladle Heating
ii) Mould Heating
iii) Heat Treatment
212 Ltrs.
Note: 1. The above norm is applicable only if the export products are manufactured through Electric Arc
Furnace/Induction Furnace Route using melting Scrap as shown at item No. 1(a).
2. In case the products are manufactured through the Induction Furnace Route, the item 3(b)(i) will not be
allowed.
3. In the case of Machined Castings, the above quantities of import items at each Sl.No. are to be
Multiplied by factors as given below:
a) Less than 10 kg/piece: = 1.36
b) 10 kgs. to 100 kgs/piece: = 1.25
c) More than 100 kgs/piece= 1.15
C385 Non-Alloy Steel -
Flanges/Couplings/
1 MT 1 Non-Alloy Steel -
Bars/Rods/Plates/ Billets/Blooms
Tees/Elbows 2 Misc. Items viz. Saw Blades/
Cutting Tools/ High Speed Steel/
Sheets/Bars/Rods/ Coils
C386 Non-Alloy Steel Forgings
C387 Non-Alloy Steel
forgings(Rough)
C388 Nuts Milled from bar
process
C389 Painted Slotted Angles
C70
1.65 MT
Upto 2% of FOB
value of exports.
1 kg 1 Forging Quality non-Alloy steel
(with less than 0.6% carbon) in
blooms/ billets/ bars
1.470 kg
2 Rectangular die steel blocks and
die steel rounds
0.025 kg
3 Fuel Oil (Light diesel oil) 0.05 Kg.
1 kg 1 Non-Alloy Steel
Bars/Rods/Billets/Blooms/Ingots
1.0 kg
Content of
Import Item
2 Relevant Packing Material &
Chemicals LDPE, Rust
Preventing Oil/Primer/Paints
1.470 Kg./Kg.
content in export
Limited to 2% of
FOB Value
3 Misc. Items:
Limited to 2% of
Refractory material Die Steel/Die FOB Value.
Blocks, Cutting Tools, Cutters,
Sawing Blades, including
Bimetallic Bandsaw Blades Steel
Shots,Fuel Oil,Head treatment
Chemicals,Quenching Oil &
Lubricants.
1 MS/Alloy/Non -Alloy Steel 1.650 kg
Rounds/Bars
1 MT 1 Hot Rolled/Cold Rolled Carbon
Steel Coils/Sheets/Plates
2 Paint/Primer Top Coat and
Backer
OR
1.20 MT/MT content
in export
69 Ltrs
Epoxy Powder Upto 4% of FOB
value of Exports